---------------------- LANtronix ---------------------- Modem Redirector for ---------------------- Windows 95/NT ---------------------- Software Revision Notes ---------------------- This document describes the problems that have been corrected and the functionality that has been added to the Lantronix Modem Redirector for Windows 95/NT. Complete release notes are installed as part of the redirector installation process. See that file for more information. ------------------------------------------------------------------------- 1.1/2 6-oct-1997 ------------------------------------------------------------------------- Special Requirements ==================== o This release requires LRS firmware V1.3/3 or greater or MSS firmware V3.5/2 or greater. It will not run with prior firmware releases. New Features ============ o Now supports up to 4 redirected ports with 4 services each. These ports can be accessed simultaneously. Resolved Problems ================= o Polling for and connecting to IPX services now works more reliably on PCs that were having trouble finding services on the network. o Under NT, flow control settings would occasionally not make it to the LRS/MSS serial ports. o Under 95, the property sheet for setting serial port characteristics on the redirector port(s) was not available. Modems Supported ================ The following fax modems have been tested against Microsoft Fax and Delrina WinFax PRO 8.0 under Windows 95. Fax modems must support fax class 2 in order to work with the redirector. (Note that fax class 2 and fax class 2.0 are different.) Fax Class 2 modems which have been tested ----------------------------------------- MSFax Delrina WinFax PRO 8.0 ----- ---------------------- SupraFax Modem 28.8 Y Y Bocamodem V.34 Y Y BestData Smart One 2834FX Y Y *1 Zoom V.34 Y Y *1 ZyXEL U-1496E Plus V.32b/FAX/VOICE Y Y *2 MultiTech MultiModem MT2834 Y Y *2 PPI 28.8 v1.53 N Y Digicom Scout 28834e N Y AT&T DataPort 28.8 N N *1 You must delete the &c1 from the Delrina's modem init string for this modem. *2 At the end of the fax transmition Delrina reports a "cannot send data to hardware" message even though the fax was sent successfully. Fax Modems that don't support Class 2 ------------------------------------- Intel SatisFAXtion Modem/400e PCFM6501 Hayes Smartmodem OPTIMA 288 USR Sportster 28.8, 33.6, 56K (supports 2.0, not 2) USR Courier V.Everything (supports 2.0, not 2)