Lantronix CoBos Software Software Release Notes Version 6.1.0.2 April 5, 2006 Copyright 2006, Lantronix Release notes are also available on the Lantronix web site (www.lantronix.com) and via anonymous FTP from ftp.lantronix.com. Contact Lantronix or your reseller for more information. This document describes the Lantronix CoBos Device Server firmware release. This release represents a combined release for older products and also provides incremental updates to newer release products from a single baseline. =============== RELEASE SUMMARY =============== Current release: 6.1.0.2 ============================= PRODUCTS SUPPORTED ============================= V6.1.0.2 supports the following products: -> Micro100 ===================== Associated Webmanager ===================== 1.4.0.3 -> Micro100 ================= FIRMWARE RELEASES ================= m100_6102.rom (060404) - Supports Micro100 product; Destination file: 4M ======= CAUTION ======= Micro100 Version 6.1.0.2 is a larger image than any previously released Micro100 ROM file. Please refer to the Micro100 Upgrade Notice for any upgrades or downgrades involving a 6.1.0.2, or later, release. ============ NEW FEATURES ============ Note: Some features may already be available on other products. 1. Added support for the RS485 interface, only available on channel 1 (Micro100). From XPort-03 6.1.0.2 Release ----------------------------- 1. Added support for the RS485 interface (XPort-03 ONLY) From WiPort 6.1.0.1 Release --------------------------- 1. C-040312-46601, C-040813-52360 Modem Result Codes selection 2. C-040804-51991 XPort-Wants To Choose Ena or Disable Sending +++ In Modem Mode 3. C-050803-68448 XPort-Not Getting "C" In Manual Mode Connection 4. C-040728-51716, C-050221-60400 Xport/All CoBOS-Monitor Mode Command To Display MAC Address For All: new GM command 5. C-040423-48241, C-041202-56844 XportEX- Hard Code Ethernet Port Speed 10/h-f or 100/h-f 6. C-040622-50345 XPort-Wants A Configurable MTU Size 7. C-041221-57687 WiPort - Add FireFox Browser Support 8. C-050427-63786 WiPort-Wants Range Of Low Power Modes => CPU performance: Low setting added. 26MHz. 9. C-050426-63721 UDS-10- Can't do No Echo and Numeric Res Codes in Modem Mode 10.C-050711-67254 WiPort-Needs SP Setting In SetZone Added For Spain 11.TKIP+WEP selection split into TKIP+WEP64 and TKIP+WEP128 12.10sec search before creation of Adhoc network when enabled. 13.Canada and Spain added to configurable countries 14.Alternate MAC support 15.Support for Intel parallel flash 16.New 77FE command: 0xA1 to write record 1 without overwriting encryption key 17.New Monitor command: SS. Same functionality as 0xA1 18.Monitor command PI keeps pinging until keyboard hit ================ REMOVED FEATURES ================ ========= BUG FIXES ========= From XPort-03 6.1.0.2 Release ----------------------------- 1. C-051121-73215 XPort-Changes Port Password When Changing Baud Rate (All CoBos) 2. C-051205-73687 XPort-03 - CP1 Pin Outputs 3.3V In Starting Process 3. C-051216-74031 XPort - Unable To Connect To Web Man After Setting Telnet Password (All CoBos) All bugs fixed in 6.1.0.1 are included -------------------------------------- 1. C-051207-73818 XPort-03 - Opening & Closing Port 9999 Causes XPort Restart 2. C-050829-69577 XPort - XPort-Port 77f0 Locks Up 3. C-050629-66837 WiPort - Reset Defaults Configurable Pin Wipes Out Wireless Settings 4. C-050615-66189 XPort - Reboots When Telnet Is Terminated Using Escape Char 5. C-050620-66373 XPort(CoBos) - TCP Packet # Not In Sequence 6. C-050420-63378 XPort - DHCP Discovery TransID Not Random 7. C-050303-61071 Tellermate reported issue with ISN 8. C-051014-71587 XPort-03 - Datagram Type 00 Not Working 9. C-050901-69764 Cobox - Echo Is Enabled By Default In 5.8.0.1 10.C-051114-72916 WiPort - Enabling WPA Will Cause The Unit to Ignore Setup Records 11.C-051216-74226 WiPort - Web Manager Allows 460/921kb Config In Low Performance Mode 12.AES lib version only shown when unlocked. 13.WiPortB associating with some wireless stations that have mismatching SSID 14.First outgoing connection attempt after bootup fails. ========== KNOWN BUGS ========== 1. C-040503-48550, C-040618-50242 - Disconnect With Ctrl D does not Work With AES serial tunnel 2. C-050401-62502 "Send Immediate After Sendchars" Not Working With AES Encryption - WiPortG: TKIP+WEP64 and TKIP+WEP128 modes not correctly working. - Ethernet mode setting: full duplex not working for fixed modes. Working correctly for autonegotiate