The XPort-03 & Xport485 process is as follows: Example command for firmware upgrade from a DOS command prompt type: C:\ tftp -i put xpt03upg_v21a.rom X2 Or C:\ tftp -i put xp485upg.rom X3 Wait 20 seconds C:\ tftp -i put xpt03_6102.rom X5 Note: use the exact file name for the .rom firmware if not the same as instruction above; i.e. xpt03_6102rc1.rom Example command for the new Web Manager upgrade from a DOS command prompt type: C:\ tftp -i put xpt_webm_1301.cob WEB4 Example command for the new Web Manager upgrade from a DOS command prompt type: 1. C:\ tftp -i put xpt_webm_1301.cob WEB4 The XPort should be operational with new 6.1.0.2 firmware. Serial Upgrade ============== Use the Advanced Recovery feature of DeviceInstaller 4.0.0.x and later as instructed in the XPort User Guide. Upgrading from 6.1.0.0 and later ================================ To reflect the change between pre-6.1.0.0 firmware and 6.1.0.0+ firmware, the TFTP destination files have been changed for XPort, XPort-03, and XPort485 from X1 to X4, X2 to X5, and X3 to X5, respectively.