TN-SISPM1040582LRT-FUNCTION-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString,MacAddress,TEXTUAL-CONVENTION,RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE,OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF ifIndex FROM IF-MIB enterprises,MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,Unsigned32,Integer32,Counter32,Counter64,IpAddress FROM SNMPv2-SMI -- PortList FROM Q-BRIDGE-MIB InetAddress, InetAddressType FROM INET-ADDRESS-MIB OwnerString FROM RMON-MIB sysObjectID FROM SNMPv2-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB; -- MacAddress FROM BRIDGE-MIB; transition MODULE-IDENTITY LAST-UPDATED "201405300000Z" ORGANIZATION "Corp." CONTACT-INFO " " DESCRIPTION "Managed Hardened PoE++ Switch (8) 10/100/1000Base-T PoE++ Ports + (2) 100/1000Base-X SFP Slot" REVISION "201405300000Z" DESCRIPTION "Rev 1.0 Initial version." ::= { enterprises 868 } -- ======================================================================================================================= OperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Oper state." SYNTAX INTEGER { up ( 1 ) , down ( 2 ) } AdminMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Admin state - default: disable(0)." SYNTAX INTEGER { disable(0), enable(1) } AdminMode2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Admin state - default: disable(0)." SYNTAX INTEGER { disable(0), enable(1), notSupported(2) } ActivateCmd ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to activate commands. default: noAction(0). " SYNTAX INTEGER { noAction ( 0 ), activate ( 1 ) } KeyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The key type specifying the key generated for frames received on the port. 0 : Normal, 1 : Double Tag, 2 : IP Address, 3 : MAC and IP Address." SYNTAX INTEGER { normal ( 0 ), doubleTag ( 1 ), ipAddr ( 2 ), macAndIpAddr ( 3 ) } FrameRate ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The values for frame rate" SYNTAX INTEGER { threeHundredFramesPerSec (0), oneHundredFramesPerSec (1), tenFramesPerSec (2), oneFramePerSec (3), sixFramesPerMin (4), oneFramePerMin (5), sixFramesPerHour (6) } DayOfWeek ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to set the days of the week." SYNTAX INTEGER {mon(1),tue(2),wed(3),thur(4), fri(5),sat(6),sun(7) } Month ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to set the month." SYNTAX INTEGER {jan(1),feb(2),march(3),april(4), may(5),june(6),july(7),aug(8), sept(9),oct(10),nov(11),dec(12)} switch OBJECT IDENTIFIER ::= { transition 2 } sispm1040582lrtProductLevel1 OBJECT IDENTIFIER ::= { switch 80 } sispm1040582lrtProductId OBJECT IDENTIFIER ::= { sispm1040582lrtProductLevel1 8 } sispm1040582lrtSystem OBJECT IDENTIFIER ::= { sispm1040582lrtProductId 1 } sispm1040582lrtSystemInformation OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 1 } sispm1040582lrtSystemInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSystemInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure System Information Table. " ::= { sispm1040582lrtSystemInformation 1 } sispm1040582lrtSystemInfoEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSystemInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtSystemInfoSwitchIndex } ::= { sispm1040582lrtSystemInfoTable 1 } SISPM1040582LRTSystemInfoEntry ::= SEQUENCE { sispm1040582lrtSystemInfoSwitchIndex Integer32, sispm1040582lrtSystemInfoModelName DisplayString, sispm1040582lrtSystemInfoSystemDescript DisplayString, sispm1040582lrtSystemInfoLocation DisplayString, sispm1040582lrtSystemInfoContact DisplayString, sispm1040582lrtSystemInfoSystemName DisplayString, sispm1040582lrtSystemInfoSystemDate DisplayString, sispm1040582lrtSystemInfoSystemUptime DisplayString, sispm1040582lrtSystemInfoBootloaderVersion DisplayString, sispm1040582lrtSystemInfoFirmwareVersion DisplayString, sispm1040582lrtSystemInfoHardwareVersion DisplayString, sispm1040582lrtSystemInfoMechanicalVersion DisplayString, sispm1040582lrtSystemInfoSerialNumber DisplayString, sispm1040582lrtSystemInfoHostMACAddress DisplayString, sispm1040582lrtSystemInfoMemory DisplayString, sispm1040582lrtSystemInfoFlash DisplayString, sispm1040582lrtSystemInfoPowerStatus DisplayString, sispm1040582lrtSystemInfoPowers DisplayString, sispm1040582lrtSystemInfoTemperatureStatus DisplayString, -- sispm1040582lrtSystemInfoTemperature1 DisplayString, -- sispm1040582lrtSystemInfoTemperature2 DisplayString, sispm1040582lrtSystemInfoCPULoad DisplayString, sispm1040582lrtSystemInfoPoEFirmwareVersion DisplayString } sispm1040582lrtSystemInfoSwitchIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch Index." ::= { sispm1040582lrtSystemInfoEntry 1 } sispm1040582lrtSystemInfoModelName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 2 } sispm1040582lrtSystemInfoSystemDescript OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 3 } sispm1040582lrtSystemInfoLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 4 } sispm1040582lrtSystemInfoContact OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 5 } sispm1040582lrtSystemInfoSystemName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 6 } sispm1040582lrtSystemInfoSystemDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 7 } sispm1040582lrtSystemInfoSystemUptime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 8 } sispm1040582lrtSystemInfoBootloaderVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 9 } sispm1040582lrtSystemInfoFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 10 } sispm1040582lrtSystemInfoHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 11 } sispm1040582lrtSystemInfoMechanicalVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 12 } sispm1040582lrtSystemInfoSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 13 } sispm1040582lrtSystemInfoHostMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 14 } sispm1040582lrtSystemInfoMemory OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 15 } sispm1040582lrtSystemInfoFlash OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 16 } sispm1040582lrtSystemInfoPowerStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 19 } sispm1040582lrtSystemInfoPowers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 20 } sispm1040582lrtSystemInfoTemperatureStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 21 } --sispm1040582lrtSystemInfoTemperature1 OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtSystemInfoEntry 22 } -- --sispm1040582lrtSystemInfoTemperature2 OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtSystemInfoEntry 23 } sispm1040582lrtSystemInfoCPULoad OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "CPU Utilization." ::= { sispm1040582lrtSystemInfoEntry 24 } sispm1040582lrtSystemInfoPoEFirmwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSystemInfoEntry 26 } sispm1040582lrtSystemTimeConf OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 2 } sispm1040582lrtSystemNTP OBJECT IDENTIFIER ::= { sispm1040582lrtSystemTimeConf 1 } sispm1040582lrtSystemTime OBJECT IDENTIFIER ::= { sispm1040582lrtSystemTimeConf 2 } sispm1040582lrtSystemTimeZone OBJECT IDENTIFIER ::= { sispm1040582lrtSystemTime 1 } sispm1040582lrtSystemTimeDaylightSaving OBJECT IDENTIFIER ::= { sispm1040582lrtSystemTime 2 } sispm1040582lrtSystemTimeConfiguration OBJECT IDENTIFIER ::= { sispm1040582lrtSystemTime 3 } -- -- ======================================================================================================================= -- Objects in the sispm1040582lrtSystemNTP Group -- ======================================================================================================================= sispm1040582lrtSystemNTPMode OBJECT-TYPE SYNTAX INTEGER {useLocal(0),useNTP(1)} MAX-ACCESS read-write STATUS current DESCRIPTION "The system NTP Mode. useLocal(0) : Use Local Settings, useNTP(1) : Use NTP Server." DEFVAL { useLocal } ::= { sispm1040582lrtSystemNTP 1 } sispm1040582lrtSystemNTPServer1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server1. You can use the IP address or domain name." ::= { sispm1040582lrtSystemNTP 2 } sispm1040582lrtSystemNTPServer2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server2. You can use the IP address or domain name." ::= { sispm1040582lrtSystemNTP 3 } sispm1040582lrtSystemNTPServer3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server3. You can use the IP address or domain name." ::= { sispm1040582lrtSystemNTP 4 } sispm1040582lrtSystemNTPServer4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server4. You can use the IP address or domain name." ::= { sispm1040582lrtSystemNTP 5 } sispm1040582lrtSystemNTPServer5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Server5. You can use the IP address or domain name." ::= { sispm1040582lrtSystemNTP 6 } -- -- ======================================================================================================================= -- Objects in the sispm1040582lrtSystemTime Group -- ======================================================================================================================= --sispm1040582lrtSystemTimeZone sispm1040582lrtSystemTimeZoneConf OBJECT-TYPE SYNTAX Integer32(-7200..7201) MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the NTP Time Zone. The value range is between -7200 and 7201 (minutes). 0 : None. -7200 : (GMT-12:00). -6600 : (GMT-11:00). -6000 : (GMT-10:00). -5400 : (GMT-09:00). -4800 : (GMT-08:00)Pacific Time. -4801 : (GMT-08:00)Tijuana, Baja California. -4200 : (GMT-07:00)Arizona. -4201 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - New. -4202 : (GMT-07:00)Chihuahua, La Paz, Mazatlan - Old. -4203 : (GMT-07:00)Mountain Time. -3600 : (GMT-06:00)Central America. -3601 : (GMT-06:00)Central Time. -3602 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - New. -3603 : (GMT-06:00)Guadalajara, Mexico City, Monterrey - Old. -3604 : (GMT-06:00)Saskatchewan. -3000 : (GMT-05:00)Bogota, Lima, Quito, Rio Branco. -3001 : (GMT-05:00)Eastern Time. -3002 : (GMT-05:00)Indiana. -2700 : (GMT-04:30). -2400 : (GMT-04:00)Atlantic Time. -2401 : (GMT-04:00)La Paz. -2402 : (GMT-04:00)Manaus. -2403 : (GMT-04:00)Santiago. -2100 : (GMT-03:30). -1800 : (GMT-03:00)Brasilia. -1801 : (GMT-03:00)Buenos Aires. -1802 : (GMT-03:00)Georgetown. -1803 : (GMT-03:00)Greenland. -1804 : (GMT-03:00)Montevideo. -1805 : (GMT-02:00). -600 : (GMT-01:00)Azores. -601 : (GMT-01:00)Cape Verde Is. 1 : (GMT) Casablanca. 2 : (GMT) Greenwich Mean Time. 3 : (GMT) Monrovia, Reykjavik. 600 : (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna. 601 : (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague. 602 : (GMT+01:00) Brussels, Copenhagen, Madrid, Paris. 603 : (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb. 604 : (GMT+01:00) West Central Africa. 1200 : (GMT+02:00) Amman. 1201 : (GMT+02:00) Athens, Bucharest, Istanbul. 1202 : (GMT+02:00) Beirut. 1203 : (GMT+02:00) Cairo. 1204 : (GMT+02:00) Harare, Pretoria. 1205 : (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius. 1206 : (GMT+02:00) Jerusalem. 1207 : (GMT+02:00) Minsk. 1208 : (GMT+02:00) Windhoek. 1800 : (GMT+03:00) Baghdad. 1801 : (GMT+03:00) Kuwait, Riyadh. 1802 : (GMT+03:00) Moscow, St. Petersburg, Volgograd. 1803 : (GMT+03:00) Nairobi. 1804 : (GMT+03:00) Tbilisi. 2100 : (GMT+03:30) Tehran. 2400 : (GMT+04:00) Abu Dhabi, Muscat. 2401 : (GMT+04:00) Baku. 2402 : (GMT+04:00) Caucasus Standard Time. 2403 : (GMT+04:00) Port Louis. 2404 : (GMT+04:00) Yerevan. 2700 : (GMT+04:30) Kabul. 3000 : (GMT+05:00) Ekaterinburg. 3001 : (GMT+05:00) Islamabad, Karachi. 3002 : (GMT+05:00) Tashkent. 3300 : (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi. 3301 : (GMT+05:30) Sri Jayawardenepura. 3455 : (GMT+05:45) Kathmandu. 3600 : (GMT+06:00) Almaty, Novosibirsk. 3601 : (GMT+06:00) Astana, Dhaka. 3600 : (GMT+06:30) Yangon (Rangoon). 4200 : (GMT+07:00) Bangkok, Hanoi, Jakarta. 4201 : (GMT+07:00) Krasnoyarsk. 4800 : (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi. 4801 : (GMT+08:00) Irkutsk, Ulaan Bataar. 4802 : (GMT+08:00) Kuala Lumpur, Singapore. 4803 : (GMT+08:00) Perth. 4804 : (GMT+08:00) Taipei. 5400 : (GMT+09:00) Osaka, Sapporo, Tokyo. 5401 : (GMT+09:00) Seoul. 5402 : (GMT+09:00) Yakutsk. 5700 : (GMT+09:30) Adelaide. 5701 : (GMT+09:30) Darwin. 6000 : (GMT+10:00) Brisbane. 6001 : (GMT+10:00) Canberra, Melbourne, Sydney. 6002 : (GMT+10:00) Guam, Port Moresby. 6003 : (GMT+10:00) Hobart. 6004 : (GMT+10:00) Vladivostok. 6600 : (GMT+11:00) Magadan, Solomon Is., New Caledonia. 7200 : (GMT+12:00) Auckland, Wellington. 7201 : (GMT+12:00) Fiji, Kamchatka, Marshall Is." ::= { sispm1040582lrtSystemTimeZone 1 } sispm1040582lrtSystemTimeZoneAcronym OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Acronym - User can set the acronym of the time zone. This is a User configurable acronym to identify the time zone. Range : 0 - 16 characters." ::= { sispm1040582lrtSystemTimeZone 2 } --sispm1040582lrtSystemTimeDaylightSaving sispm1040582lrtSystemTimeDaylightSavingMode OBJECT-TYPE SYNTAX INTEGER { disable(0), recurring(1), nonRecurring(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The system Daylight Savings Mode. disable(0) : Disable. recurring(1) : Recurring - configure the Daylight Saving Time duration to repeat the configuration every year. nonRecurring(2): Non-Recurring - configure the Daylight Saving Time duration for single time configuration." DEFVAL { disable } ::= { sispm1040582lrtSystemTimeDaylightSaving 1 } sispm1040582lrtSystemTimeDaylightSavingStartWeek OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Week. Use in Recurring Mode. Range : 1 - 5. Default : 1." ::= { sispm1040582lrtSystemTimeDaylightSaving 2 } sispm1040582lrtSystemTimeDaylightSavingStartDay OBJECT-TYPE SYNTAX DayOfWeek MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Day. Use in Recurring Mode." DEFVAL { mon } ::= { sispm1040582lrtSystemTimeDaylightSaving 3 } sispm1040582lrtSystemTimeDaylightSavingStartMonth OBJECT-TYPE SYNTAX Month MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Month." DEFVAL { jan } ::= { sispm1040582lrtSystemTimeDaylightSaving 4 } sispm1040582lrtSystemTimeDaylightSavingStartDate OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Date. Use in Non-Recurring Mode. Range : 1 - 31. Default : 1." ::= { sispm1040582lrtSystemTimeDaylightSaving 5 } sispm1040582lrtSystemTimeDaylightSavingStartYear OBJECT-TYPE SYNTAX Integer32 (2000..2097) MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Year. Use in Non-Recurring Mode. Range : 2000 - 2097. Default : 2000." ::= { sispm1040582lrtSystemTimeDaylightSaving 6 } sispm1040582lrtSystemTimeDaylightSavingStartHours OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Hours. Range : 0 - 23. Default : 0." ::= { sispm1040582lrtSystemTimeDaylightSaving 7 } sispm1040582lrtSystemTimeDaylightSavingStartMinutes OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "Start time Minutes. Range : 0 - 59. Default : 0." ::= { sispm1040582lrtSystemTimeDaylightSaving 8 } sispm1040582lrtSystemTimeDaylightSavingEndWeek OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "End time Week. Use in Recurring Mode. Range : 1 - 5. Default : 1." ::= { sispm1040582lrtSystemTimeDaylightSaving 9 } sispm1040582lrtSystemTimeDaylightSavingEndDay OBJECT-TYPE SYNTAX DayOfWeek MAX-ACCESS read-write STATUS current DESCRIPTION "End time Day. Use in Recurring Mode." DEFVAL { mon } ::= { sispm1040582lrtSystemTimeDaylightSaving 10 } sispm1040582lrtSystemTimeDaylightSavingEndMonth OBJECT-TYPE SYNTAX Month MAX-ACCESS read-write STATUS current DESCRIPTION "End time Month." DEFVAL { jan } ::= { sispm1040582lrtSystemTimeDaylightSaving 11 } sispm1040582lrtSystemTimeDaylightSavingEndDate OBJECT-TYPE SYNTAX Integer32 (1..31) MAX-ACCESS read-write STATUS current DESCRIPTION "End time Date. Use in Non-Recurring Mode. Range : 1 - 31. Default : 1." ::= { sispm1040582lrtSystemTimeDaylightSaving 12 } sispm1040582lrtSystemTimeDaylightSavingEndYear OBJECT-TYPE SYNTAX Integer32 (2000..2097) MAX-ACCESS read-write STATUS current DESCRIPTION "End time Year. Use in Non-Recurring Mode. Range : 2000 - 2097. Default : 2000." ::= { sispm1040582lrtSystemTimeDaylightSaving 13 } sispm1040582lrtSystemTimeDaylightSavingEndHours OBJECT-TYPE SYNTAX Integer32 (0..23) MAX-ACCESS read-write STATUS current DESCRIPTION "End time Hours. Range : 0 - 23. Default : 0." ::= { sispm1040582lrtSystemTimeDaylightSaving 14 } sispm1040582lrtSystemTimeDaylightSavingEndMinutes OBJECT-TYPE SYNTAX Integer32 (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "End time Minutes. Range : 0 - 59. Default : 0." ::= { sispm1040582lrtSystemTimeDaylightSaving 15 } sispm1040582lrtSystemTimeDaylightSavingOffset OBJECT-TYPE SYNTAX Integer32 (1..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Offset - the number of minutes to add during Daylight Saving Time. Range : 1 - 1440(Minutes). Default : 1." ::= { sispm1040582lrtSystemTimeDaylightSaving 16 } sispm1040582lrtSystemTimeConfigurationClockSource OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Use Local Settings. 1:Use NTP Server." ::= { sispm1040582lrtSystemTimeConfiguration 1} sispm1040582lrtSystemTimeConfigurationDateFormat OBJECT-TYPE SYNTAX Integer32 (0|1|2) MAX-ACCESS read-write STATUS current DESCRIPTION "The date format of the system. 0:yyyy-mm-dd 1:mm-dd-yyyy 2:dd-mm-yyyy" ::= { sispm1040582lrtSystemTimeConfiguration 2} sispm1040582lrtSystemTimeConfigurationTimeFormat OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "The time format of the system. 0:24-hr, format:hh:mm:ss 1:12-hr, format:hh:mm:ss am/pm" ::= { sispm1040582lrtSystemTimeConfiguration 3} sispm1040582lrtSystemTimeConfigurationSystemDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System date. Default format:yyyy-mm-dd. When ClockSource is Use Local Settings, you can set this field." ::= { sispm1040582lrtSystemTimeConfiguration 4} sispm1040582lrtSystemTimeConfigurationSystemTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "System date. 24-hr, format:hh:mm:ss 12-hr, format:hh:mm:ss am/pm When ClockSource is Use Local Settings, you can set this field." ::= { sispm1040582lrtSystemTimeConfiguration 5} -- ======================================================================================================================= sispm1040582lrtSystemAccount OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 3 } sispm1040582lrtSystemAccountUsers OBJECT IDENTIFIER ::= { sispm1040582lrtSystemAccount 1 } -- -- ======================================================================================================================= -- Start sispm1040582lrtUserConfig group -- ======================================================================================================================= --sispm1040582lrtUserConfigTable sispm1040582lrtUserConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTUserConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The User Config Table. " ::= { sispm1040582lrtSystemAccountUsers 1 } sispm1040582lrtUserConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTUserConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The User Config Entry." INDEX { sispm1040582lrtUserConfigIndex } ::= { sispm1040582lrtUserConfigTable 1 } SISPM1040582LRTUserConfigEntry ::= SEQUENCE { sispm1040582lrtUserConfigIndex Integer32, sispm1040582lrtUserConfigUserName DisplayString, sispm1040582lrtUserConfigPassword DisplayString, sispm1040582lrtUserConfigPrivilegeLevel Integer32, sispm1040582lrtUserConfigRowStatus RowStatus } sispm1040582lrtUserConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The user Config Index. " ::= { sispm1040582lrtUserConfigEntry 1 } sispm1040582lrtUserConfigUserName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "A string identifying the user name for the entry. string length: 1-31. " ::= { sispm1040582lrtUserConfigEntry 2 } sispm1040582lrtUserConfigPassword OBJECT-TYPE SYNTAX DisplayString(SIZE (0..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "The password of the user. string length: 0-31. " ::= { sispm1040582lrtUserConfigEntry 3 } sispm1040582lrtUserConfigPrivilegeLevel OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The privilege level of the user.If the privilege level value is 15, it can access all groups.range: 1-15. " ::= { sispm1040582lrtUserConfigEntry 4 } sispm1040582lrtUserConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtUserConfigEntry 5 } -- -- ======================================================================================================================= -- Start sispm1040582lrtPrivilegeLevelConfig group -- ======================================================================================================================= --sispm1040582lrtPrivilegeLevelConfigTable sispm1040582lrtPrivilegeLevelConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPrivilegeLevelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Privilege Level Config Table. " ::= { sispm1040582lrtSystemAccountUsers 2 } sispm1040582lrtPrivilegeLevelConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPrivilegeLevelConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Privilege Level Config Entry." INDEX { sispm1040582lrtPrivilegeLevelIndex } ::= { sispm1040582lrtPrivilegeLevelConfigTable 1 } SISPM1040582LRTPrivilegeLevelConfigEntry ::= SEQUENCE { sispm1040582lrtPrivilegeLevelIndex Integer32, sispm1040582lrtPrivilegeLevelGroupName DisplayString, sispm1040582lrtPrivilegeLevelConfigReadOnly Integer32, sispm1040582lrtPrivilegeLevelConfigReadWrite Integer32, sispm1040582lrtPrivilegeLevelStatusReadOnly Integer32, sispm1040582lrtPrivilegeLevelStatusReadWrite Integer32 } sispm1040582lrtPrivilegeLevelIndex OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Privilege Level Index. " ::= { sispm1040582lrtPrivilegeLevelConfigEntry 1 } sispm1040582lrtPrivilegeLevelGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name identifying the privilege group." ::= { sispm1040582lrtPrivilegeLevelConfigEntry 2 } sispm1040582lrtPrivilegeLevelConfigReadOnly OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The privilege level of configuration read-only.If the privilege level value is 15,it can access all groups. range: 1-15. " ::= { sispm1040582lrtPrivilegeLevelConfigEntry 3 } sispm1040582lrtPrivilegeLevelConfigReadWrite OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The privilege level of configuration/execute read/write. If the privilege level value is 15,it can access all groups. range: 1-15. " ::= { sispm1040582lrtPrivilegeLevelConfigEntry 4 } sispm1040582lrtPrivilegeLevelStatusReadOnly OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The privilege level of status/statistics read-only. If the privilege level value is 15,it can access all groups. range: 1-15. " ::= { sispm1040582lrtPrivilegeLevelConfigEntry 5 } sispm1040582lrtPrivilegeLevelStatusReadWrite OBJECT-TYPE SYNTAX Integer32(1..15) MAX-ACCESS read-write STATUS current DESCRIPTION "The privilege level of status/statistics read-write. If the privilege level value is 15,it can access all groups. range: 1-15. " ::= { sispm1040582lrtPrivilegeLevelConfigEntry 6 } -- ======================================================================================================================= sispm1040582lrtIP OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 4 } sispm1040582lrtIPConfiguration OBJECT IDENTIFIER ::= { sispm1040582lrtIP 1 } sispm1040582lrtMode OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Configuration Mode. default:0 0: Host 1: Router" ::= {sispm1040582lrtIPConfiguration 2 } sispm1040582lrtDNSServerSource1 OBJECT-TYPE SYNTAX Integer32 (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. " ::= {sispm1040582lrtIPConfiguration 3 } sispm1040582lrtDNSServerSource2 OBJECT-TYPE SYNTAX Integer32 (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. " ::= {sispm1040582lrtIPConfiguration 4 } sispm1040582lrtDNSServerSource3 OBJECT-TYPE SYNTAX Integer32 (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. " ::= {sispm1040582lrtIPConfiguration 5 } sispm1040582lrtDNSServerSource4 OBJECT-TYPE SYNTAX Integer32 (0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Server Source. 0: No DNS configuration is applied 1: DNS configuration is manually set 2: DNS configuration is derived from DHCPv4 3: DNS configuration is derived from DHCPv4 on specific VLAN. 4. DNS configuration is derived from DHCPv6. 5. DNS configuration is derived from DHCPv6 on specific VLAN. " ::= {sispm1040582lrtIPConfiguration 6 } sispm1040582lrtDNSServerValue1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfiguration 7 } sispm1040582lrtDNSServerValue2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfiguration 8 } sispm1040582lrtDNSServerValue3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfiguration 9 } sispm1040582lrtDNSServerValue4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfiguration 10 } sispm1040582lrtDNSProxy OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS Proxy enable/disable. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPConfiguration 11 } sispm1040582lrtIPInterfaces OBJECT IDENTIFIER ::= { sispm1040582lrtIP 2 } sispm1040582lrtIPInterfacesDHCPPerPortMode OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "The dhcp per-port mode for the interface. 0: Disable, 1: Enable, default: Disable. " ::= { sispm1040582lrtIPInterfaces 1 } sispm1040582lrtIPInterfacesDHCPPerPortIPRangeLow OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The dhcp per-port ip low for the interface." ::= { sispm1040582lrtIPInterfaces 2 } sispm1040582lrtIPInterfacesDHCPPerPortIPRangeHigh OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The dhcp per-port ip high for the interface." ::= { sispm1040582lrtIPInterfaces 3 } sispm1040582lrtIPInterfacesDHCPPerPortApply OBJECT-TYPE SYNTAX Integer32 (1) MAX-ACCESS read-write STATUS current DESCRIPTION "1: Apply DHCP Per Port settings." ::= { sispm1040582lrtIPInterfaces 4 } sispm1040582lrtIPInterfacesDHCPPerPortVLAN OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "dhcp per-port VLAN." ::= { sispm1040582lrtIPInterfaces 6 } sispm1040582lrtIPInterfacesTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPInterfacesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of IP interface for switch." ::= { sispm1040582lrtIPInterfaces 5 } sispm1040582lrtIPInterfacesEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPInterfacesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sispm1040582lrtIPInterfacesTable." INDEX { sispm1040582lrtIPInterfacesIndex } ::= { sispm1040582lrtIPInterfacesTable 1 } SISPM1040582LRTIPInterfacesEntry ::= SEQUENCE { sispm1040582lrtIPInterfacesIndex Integer32, sispm1040582lrtIPInterfacesVLAN Integer32, sispm1040582lrtIPInterfacesIPv4DHCP Integer32, sispm1040582lrtIPInterfacesIPv4DHCPFallback DisplayString, sispm1040582lrtIPInterfacesIPv4DHCPCurrentLease IpAddress, sispm1040582lrtIPInterfacesIPv4Address IpAddress, sispm1040582lrtIPInterfacesIPv4Mask Integer32, sispm1040582lrtIPInterfacesIPv6DHCP Integer32, sispm1040582lrtIPInterfacesIPv6RapidCommit Integer32, sispm1040582lrtIPInterfacesIPv6CurrentLease DisplayString, sispm1040582lrtIPInterfacesIPv6Address DisplayString, sispm1040582lrtIPInterfacesIPv6Mask Integer32, sispm1040582lrtIPInterfacesRowStatus RowStatus } sispm1040582lrtIPInterfacesIndex OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface table index" ::= {sispm1040582lrtIPInterfacesEntry 1 } sispm1040582lrtIPInterfacesVLAN OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID for interface, range: 1-4095." ::= {sispm1040582lrtIPInterfacesEntry 2 } sispm1040582lrtIPInterfacesIPv4DHCP OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 DHCP Setting for interface. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPInterfacesEntry 3 } sispm1040582lrtIPInterfacesIPv4DHCPFallback OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 DHCP fallbcak. range: 1-4294967295 seconds." ::= {sispm1040582lrtIPInterfacesEntry 4 } sispm1040582lrtIPInterfacesIPv4DHCPCurrentLease OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 DHCP Current Lease Address for interface." ::= {sispm1040582lrtIPInterfacesEntry 5 } sispm1040582lrtIPInterfacesIPv4Address OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 address for interface." ::= {sispm1040582lrtIPInterfacesEntry 6 } sispm1040582lrtIPInterfacesIPv4Mask OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 mask for interface." ::= { sispm1040582lrtIPInterfacesEntry 7 } sispm1040582lrtIPInterfacesIPv6DHCP OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 DHCP Setting for interface. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPInterfacesEntry 8 } sispm1040582lrtIPInterfacesIPv6RapidCommit OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the DHCPv6 Rapid-Commit option. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPInterfacesEntry 9 } sispm1040582lrtIPInterfacesIPv6CurrentLease OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 DHCP Current Lease Address for interface." ::= {sispm1040582lrtIPInterfacesEntry 10 } sispm1040582lrtIPInterfacesIPv6Address OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 address for interface." ::= { sispm1040582lrtIPInterfacesEntry 11 } sispm1040582lrtIPInterfacesIPv6Mask OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv6 mask for interface." ::= { sispm1040582lrtIPInterfacesEntry 12 } sispm1040582lrtIPInterfacesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtIPInterfacesEntry 13 } sispm1040582lrtIPRoutes OBJECT IDENTIFIER ::= { sispm1040582lrtIP 3 } sispm1040582lrtIPRoutesTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPRoutesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP routes table for switch." ::= { sispm1040582lrtIPRoutes 1 } sispm1040582lrtIPRoutesEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPRoutesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the sispm1040582lrtIPRoutesTable." INDEX { sispm1040582lrtIPRoutesIndex } ::= { sispm1040582lrtIPRoutesTable 1 } SISPM1040582LRTIPRoutesEntry ::= SEQUENCE { sispm1040582lrtIPRoutesIndex Integer32, sispm1040582lrtIPRoutesNetwork DisplayString, sispm1040582lrtIPRoutesMaskLength Integer32, sispm1040582lrtIPRoutesGateway DisplayString, sispm1040582lrtIPRoutesNextHopVLAN Integer32, sispm1040582lrtIPRoutesRowStatus RowStatus } sispm1040582lrtIPRoutesIndex OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "routes table index" ::= {sispm1040582lrtIPRoutesEntry 2 } sispm1040582lrtIPRoutesNetwork OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4/IPv6 Network address. Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry. If Set IPRoutesNetwork, please also set IPRoutesMaskLength, IPRoutesGateway, IPRoutesNextHopVLAN." ::= {sispm1040582lrtIPRoutesEntry 3 } sispm1040582lrtIPRoutesMaskLength OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4/IPv6 mask length. Please set IPRoutesNetwork first. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= { sispm1040582lrtIPRoutesEntry 4 } sispm1040582lrtIPRoutesGateway OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4/IPv6 Gateway. Please set IPRoutesNetwork first. Please don't set IPRoutesNetwork to IPv6 and then Set IPRoutesGateway to IPv4, vice versa. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= {sispm1040582lrtIPRoutesEntry 5 } sispm1040582lrtIPRoutesNextHopVLAN OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Next Hop VLAN ID, range: 1-4095. Please set IPRoutesNetwork first. This entry only work when 1.network address is IPv6, 2.Gateway is link-local, 3.Interface of specific VLAN ID is IPv6. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= {sispm1040582lrtIPRoutesEntry 6 } sispm1040582lrtIPRoutesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtIPRoutesEntry 7 } sispm1040582lrtIPConfigurationConfigured OBJECT IDENTIFIER ::= { sispm1040582lrtIP 4 } sispm1040582lrtModeConfigured OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "IP Configuration Mode default:0 0: Host 1: Router" ::= {sispm1040582lrtIPConfigurationConfigured 2 } sispm1040582lrtDNSServerSource1Configured OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS Server Source. 0: From any DHCP interfaces 1: No DNS Server 2: Configured 4: From this DHCP interface" ::= {sispm1040582lrtIPConfigurationConfigured 3 } sispm1040582lrtDNSServerSource2Configured OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS Server Source. 0: From any DHCP interfaces 1: No DNS Server 2: Configured 4: From this DHCP interface" ::= {sispm1040582lrtIPConfigurationConfigured 4 } sispm1040582lrtDNSServerSource3Configured OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS Server Source. 0: From any DHCP interfaces 1: No DNS Server 2: Configured 4: From this DHCP interface" ::= {sispm1040582lrtIPConfigurationConfigured 5 } sispm1040582lrtDNSServerSource4Configured OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS Server Source. 0: From any DHCP interfaces 1: No DNS Server 2: Configured 4: From this DHCP interface" ::= {sispm1040582lrtIPConfigurationConfigured 6 } sispm1040582lrtDNSServerValue1Configured OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfigurationConfigured 7 } sispm1040582lrtDNSServerValue2Configured OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfigurationConfigured 8 } sispm1040582lrtDNSServerValue3Configured OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfigurationConfigured 9 } sispm1040582lrtDNSServerValue4Configured OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "DNS IPv4/IPv6 Address or VLAN value." ::= {sispm1040582lrtIPConfigurationConfigured 10 } sispm1040582lrtDNSProxyConfigured OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "DNS Proxy enable/disable. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPConfigurationConfigured 11 } sispm1040582lrtIPInterfacesConfigured OBJECT IDENTIFIER ::= { sispm1040582lrtIP 5 } sispm1040582lrtIPInterfacesConfiguredTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPInterfacesConfiguredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ip interface for switch." ::= { sispm1040582lrtIPInterfacesConfigured 1 } sispm1040582lrtIPInterfacesConfiguredEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPInterfacesConfiguredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sispm1040582lrtIPInterfacesConfiguredTable." INDEX { sispm1040582lrtIPInterfacesIndexConfigured } ::= { sispm1040582lrtIPInterfacesConfiguredTable 1 } SISPM1040582LRTIPInterfacesConfiguredEntry ::= SEQUENCE { sispm1040582lrtIPInterfacesIndexConfigured Integer32, sispm1040582lrtIPInterfacesVLANConfigured Integer32, sispm1040582lrtIPInterfacesIPv4DHCPConfigured Integer32, sispm1040582lrtIPInterfacesIPv4DHCPFallbackConfigured DisplayString, sispm1040582lrtIPInterfacesIPv4AddressConfigured IpAddress, sispm1040582lrtIPInterfacesIPv4MaskConfigured Integer32, sispm1040582lrtIPInterfacesIPv6DHCPConfigured Integer32, sispm1040582lrtIPInterfacesIPv6RapidCommitConfigured Integer32, sispm1040582lrtIPInterfacesIPv6AddressConfigured DisplayString, sispm1040582lrtIPInterfacesIPv6MaskConfigured Integer32 } sispm1040582lrtIPInterfacesIndexConfigured OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "interface table index" ::= {sispm1040582lrtIPInterfacesConfiguredEntry 2 } sispm1040582lrtIPInterfacesVLANConfigured OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN ID for interface, range: 1-4095." ::= {sispm1040582lrtIPInterfacesConfiguredEntry 3 } sispm1040582lrtIPInterfacesIPv4DHCPConfigured OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 DHCP Setting for interface. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPInterfacesConfiguredEntry 4 } sispm1040582lrtIPInterfacesIPv4DHCPFallbackConfigured OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 DHCP fallbcak. range: 1-4294967295 seconds." ::= {sispm1040582lrtIPInterfacesConfiguredEntry 5 } sispm1040582lrtIPInterfacesIPv4AddressConfigured OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 address for interface." ::= {sispm1040582lrtIPInterfacesConfiguredEntry 6 } sispm1040582lrtIPInterfacesIPv4MaskConfigured OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 mask for interface." ::= { sispm1040582lrtIPInterfacesConfiguredEntry 7 } sispm1040582lrtIPInterfacesIPv6DHCPConfigured OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 DHCP Setting for interface. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPInterfacesConfiguredEntry 8 } sispm1040582lrtIPInterfacesIPv6RapidCommitConfigured OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "Enable the DHCPv6 Rapid-Commit option. default:0 0: disable 1: enable" ::= {sispm1040582lrtIPInterfacesConfiguredEntry 9 } sispm1040582lrtIPInterfacesIPv6AddressConfigured OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 address for interface." ::= { sispm1040582lrtIPInterfacesConfiguredEntry 10 } sispm1040582lrtIPInterfacesIPv6MaskConfigured OBJECT-TYPE SYNTAX Integer32 (1..128) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv6 mask for interface." ::= { sispm1040582lrtIPInterfacesConfiguredEntry 11 } sispm1040582lrtIPRoutesConfigured OBJECT IDENTIFIER ::= { sispm1040582lrtIP 6 } sispm1040582lrtIPRoutesConfiguredTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPRoutesConfiguredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP routes table for switch." ::= { sispm1040582lrtIPRoutesConfigured 1 } sispm1040582lrtIPRoutesConfiguredEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPRoutesConfiguredEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry in the sispm1040582lrtIPRoutesConfiguredTable." INDEX { sispm1040582lrtIPRoutesIndexConfigured } ::= { sispm1040582lrtIPRoutesConfiguredTable 1 } SISPM1040582LRTIPRoutesConfiguredEntry ::= SEQUENCE { sispm1040582lrtIPRoutesIndexConfigured Integer32, sispm1040582lrtIPRoutesNetworkConfigured DisplayString, sispm1040582lrtIPRoutesMaskLengthConfigured Integer32, sispm1040582lrtIPRoutesGatewayConfigured DisplayString, sispm1040582lrtIPRoutesNextHopVLANConfigured Integer32 } sispm1040582lrtIPRoutesIndexConfigured OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "routes table index" ::= {sispm1040582lrtIPRoutesConfiguredEntry 2 } sispm1040582lrtIPRoutesNetworkConfigured OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4/IPv6 Network address. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= {sispm1040582lrtIPRoutesConfiguredEntry 3 } sispm1040582lrtIPRoutesMaskLengthConfigured OBJECT-TYPE SYNTAX Integer32 (1..32) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4/IPv6 mask length. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= { sispm1040582lrtIPRoutesConfiguredEntry 4 } sispm1040582lrtIPRoutesGatewayConfigured OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4/IPv6 Gateway. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= {sispm1040582lrtIPRoutesConfiguredEntry 5 } sispm1040582lrtIPRoutesNextHopVLANConfigured OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Next Hop VLAN ID, range: 1-4095. Note: All entries in routes table will be sort by 1.network address 2.mask length 3. gateway 4. next hop VLAN, if you add/modify an entry, all entries will be reordered. Please check all entries in table to find your modified entry after set/add an entry." ::= {sispm1040582lrtIPRoutesConfiguredEntry 6 } sispm1040582lrtIPStatusInterface OBJECT IDENTIFIER ::= { sispm1040582lrtIP 7 } sispm1040582lrtIPStatusInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPStatusInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system IP Status table to show all IP interfaces." ::= { sispm1040582lrtIPStatusInterface 1 } sispm1040582lrtIPStatusInterfaceEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPStatusInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the IP Status Table." INDEX { sispm1040582lrtIPStatusInterfaceIndex } ::= { sispm1040582lrtIPStatusInterfaceTable 1 } SISPM1040582LRTIPStatusInterfaceEntry ::= SEQUENCE { sispm1040582lrtIPStatusInterfaceIndex Integer32, sispm1040582lrtIPStatusInterfaceName DisplayString, sispm1040582lrtIPStatusInterfaceType DisplayString, sispm1040582lrtIPStatusInterfaceAddress DisplayString, sispm1040582lrtIPStatusInterfaceStatus DisplayString } sispm1040582lrtIPStatusInterfaceIndex OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of table to show all IP interfaces." ::= { sispm1040582lrtIPStatusInterfaceEntry 1 } sispm1040582lrtIPStatusInterfaceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interface." ::= { sispm1040582lrtIPStatusInterfaceEntry 2 } sispm1040582lrtIPStatusInterfaceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the entry. This may be LINK or IPv4." ::= { sispm1040582lrtIPStatusInterfaceEntry 3 } sispm1040582lrtIPStatusInterfaceAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current address of the interface (of the given type)." ::= { sispm1040582lrtIPStatusInterfaceEntry 4 } sispm1040582lrtIPStatusInterfaceStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The status flags of the interface (and/or address)." ::= { sispm1040582lrtIPStatusInterfaceEntry 5 } sispm1040582lrtIPStatusRoute OBJECT IDENTIFIER ::= { sispm1040582lrtIP 8 } sispm1040582lrtIPStatusRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPStatusRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Status Route table show all routing entries." ::= { sispm1040582lrtIPStatusRoute 1 } sispm1040582lrtIPStatusRouteEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPStatusRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "an entry in the IP Status route table." INDEX { sispm1040582lrtIPStatusRouteIndex } ::= { sispm1040582lrtIPStatusRouteTable 1 } SISPM1040582LRTIPStatusRouteEntry ::= SEQUENCE { sispm1040582lrtIPStatusRouteIndex Integer32, sispm1040582lrtIPStatusRouteNetwork DisplayString, sispm1040582lrtIPStatusRouteGateway DisplayString, sispm1040582lrtIPStatusRouteAddress DisplayString } sispm1040582lrtIPStatusRouteIndex OBJECT-TYPE SYNTAX Integer32(1..2048) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of table to show all routing entries." ::= { sispm1040582lrtIPStatusRouteEntry 1 } sispm1040582lrtIPStatusRouteNetwork OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP network or host address of this route." ::= { sispm1040582lrtIPStatusRouteEntry 2 } sispm1040582lrtIPStatusRouteGateway OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The gateway address of this route." ::= { sispm1040582lrtIPStatusRouteEntry 3 } sispm1040582lrtIPStatusRouteAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The route address." ::= { sispm1040582lrtIPStatusRouteEntry 4 } sispm1040582lrtIPStatusNeighborCache OBJECT IDENTIFIER ::= { sispm1040582lrtIP 9 } sispm1040582lrtIPStatusNeighborCacheTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPStatusNeighborCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ip Status Neighbor Cache Table." ::= { sispm1040582lrtIPStatusNeighborCache 1 } sispm1040582lrtIPStatusNeighborCacheEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPStatusNeighborCacheEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Ip Status Neighbor Cache Table." INDEX { sispm1040582lrtIPStatusNeighborCacheIndex } ::= { sispm1040582lrtIPStatusNeighborCacheTable 1 } SISPM1040582LRTIPStatusNeighborCacheEntry ::= SEQUENCE { sispm1040582lrtIPStatusNeighborCacheIndex Integer32, sispm1040582lrtIPStatusNeighborCacheIPAddress DisplayString, sispm1040582lrtIPStatusNeighborCacheLinkAddress DisplayString } sispm1040582lrtIPStatusNeighborCacheIndex OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the Ip Status Neighbor Cache Table." ::= { sispm1040582lrtIPStatusNeighborCacheEntry 1 } sispm1040582lrtIPStatusNeighborCacheIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the entry." ::= { sispm1040582lrtIPStatusNeighborCacheEntry 2 } sispm1040582lrtIPStatusNeighborCacheLinkAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Link (MAC) address for which a binding to the IP address given exist." ::= { sispm1040582lrtIPStatusNeighborCacheEntry 3 } sispm1040582lrtIPStatusDNSServer OBJECT IDENTIFIER ::= { sispm1040582lrtIP 10 } sispm1040582lrtIPStatusDNSServerType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The configuration type of DNS server." ::= { sispm1040582lrtIPStatusDNSServer 1 } sispm1040582lrtIPStatusDNSServerIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the DNS server." ::= { sispm1040582lrtIPStatusDNSServer 2 } sispm1040582lrtIPStatusDNSServerInterface OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interface." ::= { sispm1040582lrtIPStatusDNSServer 3 } -- ======================================================================================================================= sispm1040582lrtSyslog OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 5 } sispm1040582lrtSyslogConf OBJECT IDENTIFIER ::= { sispm1040582lrtSyslog 1 } sispm1040582lrtSysLogInfo OBJECT IDENTIFIER ::= { sispm1040582lrtSyslog 2 } -- -- ======================================================================================================================= -- Objects in the sispm1040582lrtSystemLog Group -- ======================================================================================================================= --sispm1040582lrtSystemLogConf sispm1040582lrtSystemLogServerMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "The System log server mode admin state." DEFVAL { disable } ::= { sispm1040582lrtSyslogConf 1 } sispm1040582lrtSystemLogServerAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Host address of syslog server." ::= { sispm1040582lrtSyslogConf 2 } -- sispm1040582lrtSystemLogSyslogLevel OBJECT-TYPE -- SYNTAX INTEGER { -- info(0), -- warning(1), -- error(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The syslog level. -- info(0) : Info. -- warning(1): Warning. -- error(2) : Error." -- DEFVAL { info } -- ::= { sispm1040582lrtSyslogConf 3 } sispm1040582lrtSystemLogServerPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "syslog service port number. range : 1-65535, default : 514." ::= { sispm1040582lrtSyslogConf 4 } --sispm1040582lrtSystemLogInfo sispm1040582lrtSystemLogInfoLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7), all(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Level input field is used to filter the display system log entries. 0: Emergency. 1: Alert. 2: Critical. 3: Error. 4: Warning. 5: Notice. 6: Information. 7: Debug. 8: All." DEFVAL { all } ::= { sispm1040582lrtSysLogInfo 1 } sispm1040582lrtSystemLogInfoClearLevel OBJECT-TYPE SYNTAX INTEGER { emergency(0), alert(1), critical(2), error(3), warning(4), notice(5), information(6), debug(7), all(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Clear Level input field is used to specify which system log entries will be cleared. default: 8 (All). 0: Emergency. 1: Alert. 2: Critical. 3: Error. 4: Warning. 5: Notice. 6: Information. 7: Debug. 8: All." DEFVAL { all } ::= { sispm1040582lrtSysLogInfo 2 } sispm1040582lrtSystemLogInfoClearCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Command to clear the syslog. noAction(0) : do nothing (read only). activate(1) : Clear Syslog." DEFVAL { noAction } ::= { sispm1040582lrtSysLogInfo 3 } sispm1040582lrtSystemLogDetailedInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSystemLogDetailedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system detailed Log Info table." ::= { sispm1040582lrtSysLogInfo 4 } sispm1040582lrtSystemLogDetailedInfoEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSystemLogDetailedInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the system detailed Log Info table." INDEX { sispm1040582lrtSystemLogDetailedInfoID } ::= { sispm1040582lrtSystemLogDetailedInfoTable 1 } SISPM1040582LRTSystemLogDetailedInfoEntry ::= SEQUENCE { sispm1040582lrtSystemLogDetailedSwitchIndex Integer32, sispm1040582lrtSystemLogDetailedInfoID Integer32, sispm1040582lrtSystemLogDetailedInfoLevel DisplayString, sispm1040582lrtSystemLogDetailedInfoTime DisplayString, sispm1040582lrtSystemLogDetailedInfoMessage DisplayString } sispm1040582lrtSystemLogDetailedSwitchIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The switch index for the system detailed Log Info table." ::= { sispm1040582lrtSystemLogDetailedInfoEntry 1 } sispm1040582lrtSystemLogDetailedInfoID OBJECT-TYPE SYNTAX Integer32(1..999) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for the system detailed Log Info table." ::= { sispm1040582lrtSystemLogDetailedInfoEntry 2 } sispm1040582lrtSystemLogDetailedInfoLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Info Level." ::= { sispm1040582lrtSystemLogDetailedInfoEntry 3 } sispm1040582lrtSystemLogDetailedInfoTime OBJECT-TYPE SYNTAX DisplayString(SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The time" ::= { sispm1040582lrtSystemLogDetailedInfoEntry 4 } sispm1040582lrtSystemLogDetailedInfoMessage OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The message of this entry." ::= { sispm1040582lrtSystemLogDetailedInfoEntry 5 } sispm1040582lrtSystemDORelayOpenClose OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "DO Relay Open/Close. 1:open 0:close" ::= { sispm1040582lrtSysLogInfo 5 } -- ======================================================================================================================= sispm1040582lrtSnmp OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 6 } sispm1040582lrtSnmpSystem OBJECT IDENTIFIER ::= { sispm1040582lrtSnmp 1 } sispm1040582lrtSnmpSystemMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP mode operation. default : 1, 0: disable, 1: enable. " ::= { sispm1040582lrtSnmpSystem 1 } sispm1040582lrtSnmpSystemVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP supported version. default : snmpv2c. 0: snmpv1 1: snmpv2c 2: snmpv3." ::= { sispm1040582lrtSnmpSystem 2 } sispm1040582lrtSnmpSystemReadCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the community read access string to permit access to SNMP agent. The allowed string length is 0 to 255. The field is applicable only when SNMP version is SNMPv1 or SNMPv2c." ::= { sispm1040582lrtSnmpSystem 3 } sispm1040582lrtSnmpSystemWriteCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the community write access string to permit access to SNMP agent. The allowed string length is 0 to 255. The field is applicable only when SNMP version is SNMPv1 or SNMPv2c." ::= { sispm1040582lrtSnmpSystem 4 } sispm1040582lrtSnmpSystemEngineID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the SNMPv3 engine ID. The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. Allow string length is 10 to 32. Change of the Engine ID will clear all original local users." ::= { sispm1040582lrtSnmpSystem 5 } sispm1040582lrtSnmpSystemWriteCommunityMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "SNMP write community mode operation. default : 1, 0: disable, 1: enable. " ::= { sispm1040582lrtSnmpSystem 6 } sispm1040582lrtSnmpTrapGlobalMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the trap mode operation. 0:Disable. 1:Enable." ::= { sispm1040582lrtSnmp 2 } sispm1040582lrtTrapDestinationConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTTrapDestinationConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of trap host entry. The numbers of entries are given by the value of TrapHostConfNumber." ::= { sispm1040582lrtSnmp 3 } sispm1040582lrtTrapDestinationConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTTrapDestinationConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for trap host." INDEX { sispm1040582lrtTrapDestinationConfIndex } ::= { sispm1040582lrtTrapDestinationConfTable 1 } SISPM1040582LRTTrapDestinationConfEntry ::= SEQUENCE { sispm1040582lrtTrapDestinationConfIndex Integer32, sispm1040582lrtTrapDestinationConfTrapConfigName DisplayString, sispm1040582lrtTrapDestinationConfTrapMode Integer32, sispm1040582lrtTrapDestinationConfTrapVersion Integer32, sispm1040582lrtTrapDestinationConfTrapCommunity DisplayString, sispm1040582lrtTrapDestinationConfTrapDestinationAddres DisplayString, sispm1040582lrtTrapDestinationConfTrapDestinationPort Integer32, sispm1040582lrtTrapDestinationConfTrapInformMode Integer32, sispm1040582lrtTrapDestinationConfTrapInformTimeout Integer32, sispm1040582lrtTrapDestinationConfTrapInformRetryTimes Integer32, sispm1040582lrtTrapDestinationConfTrapProbeSecurityEngineID Integer32, sispm1040582lrtTrapDestinationConfTrapSecurityEngineID DisplayString, sispm1040582lrtTrapDestinationConfTrapSecurityName DisplayString, sispm1040582lrtTrapDestinationConfTrapRowStatus Integer32 } sispm1040582lrtTrapDestinationConfIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of tarp destination configurations." ::= { sispm1040582lrtTrapDestinationConfEntry 1 } sispm1040582lrtTrapDestinationConfTrapConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which trap Configuration's name for configuring. The allowed string length is 0 to 255, and the allowed content is ASCII characters from 33 to 126." ::= { sispm1040582lrtTrapDestinationConfEntry 2 } sispm1040582lrtTrapDestinationConfTrapMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP mode operation. Possible modes are: 2: Enable TCP SNMP mode operation. 1: Enable UDP SNMP mode operation. 0: Disable SNMP mode operation. " ::= { sispm1040582lrtTrapDestinationConfEntry 3 } sispm1040582lrtTrapDestinationConfTrapVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0: snmpv1 1: snmpv2c 3: snmpv3. " ::= { sispm1040582lrtTrapDestinationConfEntry 4 } sispm1040582lrtTrapDestinationConfTrapCommunity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the community access string when sending SNMP trap packet. The allowed string length is 0 to 255, and the allowed content is ASCII characters from 33 to 126." ::= { sispm1040582lrtTrapDestinationConfEntry 5 } sispm1040582lrtTrapDestinationConfTrapDestinationAddres OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap destination address. It allow a valid IP address in dotted decimal notation ('x.y.z.w'). And it also allow a valid hostname. A valid hostname is a string drawn from the alphabet (A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first character must be an alpha character, and the first and last characters must not be a dot or a dash. Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it can appear only once. It can also represent a legally valid IPv4 address. For example, '::192.1.2.34'." ::= { sispm1040582lrtTrapDestinationConfEntry 6 } sispm1040582lrtTrapDestinationConfTrapDestinationPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap destination port. SNMP Agent will send SNMP message via this port, the port range is 1~65535." ::= { sispm1040582lrtTrapDestinationConfEntry 7 } sispm1040582lrtTrapDestinationConfTrapInformMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap inform mode operation. Possible modes are: 1: Enable SNMP trap inform mode operation. 0: Disable SNMP trap inform mode operation. " ::= { sispm1040582lrtTrapDestinationConfEntry 8 } sispm1040582lrtTrapDestinationConfTrapInformTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147." ::= { sispm1040582lrtTrapDestinationConfEntry 9 } sispm1040582lrtTrapDestinationConfTrapInformRetryTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap inform retry times. The allowed range is 0 to 255." ::= { sispm1040582lrtTrapDestinationConfEntry 10 } sispm1040582lrtTrapDestinationConfTrapProbeSecurityEngineID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap probe security engine ID mode of operation. Possible values are: 1: Enable SNMP trap probe security engine ID mode of operation. 0: Disable SNMP trap probe security engine ID mode of operation." ::= { sispm1040582lrtTrapDestinationConfEntry 11 } sispm1040582lrtTrapDestinationConfTrapSecurityEngineID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap security engine ID. SNMPv3 sends traps and informs using USM for authentication and privacy. A unique engine ID for these traps and informs is needed. When Trap Probe Security Engine ID is enabled, the ID will be probed automatically. Otherwise, the ID specified in this field is used. The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed." ::= { sispm1040582lrtTrapDestinationConfEntry 12 } sispm1040582lrtTrapDestinationConfTrapSecurityName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP trap security name. SNMPv3 traps and informs using USM for authentication and privacy. A unique security name is needed when traps and informs are enabled. This name from user name of user configuration." ::= { sispm1040582lrtTrapDestinationConfEntry 13 } sispm1040582lrtTrapDestinationConfTrapRowStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtTrapDestinationConfEntry 14 } sispm1040582lrtSNMPCommunityConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSNMPCommunityConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of snmp community configuration entry." ::= { sispm1040582lrtSnmp 5 } sispm1040582lrtSNMPCommunityConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSNMPCommunityConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for snmp community configuration." INDEX { sispm1040582lrtSNMPCommunityConfIndex } ::= { sispm1040582lrtSNMPCommunityConfTable 1 } SISPM1040582LRTSNMPCommunityConfEntry ::= SEQUENCE { sispm1040582lrtSNMPCommunityConfIndex Integer32, sispm1040582lrtSNMPCommunityConfSNMPv3Community DisplayString, sispm1040582lrtSNMPCommunityConfSNMPv3SourceIP IpAddress, sispm1040582lrtSNMPCommunityConfSNMPv3SourceMask IpAddress, sispm1040582lrtSNMPCommunityConfSNMPv3RowStatus Integer32 } sispm1040582lrtSNMPCommunityConfIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Community configuration index." ::= { sispm1040582lrtSNMPCommunityConfEntry 1 } sispm1040582lrtSNMPCommunityConfSNMPv3Community OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the community access string to permit access to SNMPv3 agent. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. The community string will be treated as security name and map a SNMPv1 or SNMPv2c community string." ::= { sispm1040582lrtSNMPCommunityConfEntry 2 } sispm1040582lrtSNMPCommunityConfSNMPv3SourceIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP access source address. A particular range of source addresses can be used to restrict source subnet when combined with source mask." ::= {sispm1040582lrtSNMPCommunityConfEntry 3 } sispm1040582lrtSNMPCommunityConfSNMPv3SourceMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the SNMP access source address mask." ::= {sispm1040582lrtSNMPCommunityConfEntry 4 } sispm1040582lrtSNMPCommunityConfSNMPv3RowStatus OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtSNMPCommunityConfEntry 5 } sispm1040582lrtSNMPv3UserConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSNMPv3UserConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of snmpv3 user configuration entry." ::= { sispm1040582lrtSnmp 6 } sispm1040582lrtSNMPv3UserConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSNMPv3UserConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for snmpv3 user configuration." INDEX { sispm1040582lrtSNMPv3UserConfIndex } ::= { sispm1040582lrtSNMPv3UserConfTable 1 } SISPM1040582LRTSNMPv3UserConfEntry ::= SEQUENCE { sispm1040582lrtSNMPv3UserConfIndex Integer32, sispm1040582lrtSNMPv3UserConfEngineID DisplayString, sispm1040582lrtSNMPv3UserConfUserName DisplayString, sispm1040582lrtSNMPv3UserConfSecurityLevel Integer32, sispm1040582lrtSNMPv3UserConfAuthenticationProtocol Integer32, sispm1040582lrtSNMPv3UserConfAuthenticationPassword DisplayString, sispm1040582lrtSNMPv3UserConfPrivacyProtocol Integer32, sispm1040582lrtSNMPv3UserConfPrivacyPassword DisplayString, sispm1040582lrtSNMPv3UserConfRowStatus RowStatus } sispm1040582lrtSNMPv3UserConfIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "User configuration index." ::= { sispm1040582lrtSNMPv3UserConfEntry 1 } sispm1040582lrtSNMPv3UserConfEngineID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "An octet string identifying the engine ID that this entry should belong to. The string must contain an even number(in hexadecimal format) with number of digits between 10 and 64, but all-zeros and all-'F's are not allowed. The SNMPv3 architecture uses the User-based Security Model (USM) for message security and the View-based Access Control Model (VACM) for access control. For the USM entry, the usmUserEngineID and usmUserName are the entry's keys. In a simple agent, usmUserEngineID is always that agent's own snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with which this user can communicate. In other words, if user engine ID equal system engine ID then it is local user; otherwise it's remote user. " ::= { sispm1040582lrtSNMPv3UserConfEntry 2 } sispm1040582lrtSNMPv3UserConfUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string identifying the user name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126." ::= { sispm1040582lrtSNMPv3UserConfEntry 3 } sispm1040582lrtSNMPv3UserConfSecurityLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1:NoAuth, NoPriv 2:Auth, NoPriv 3:Auth, Priv" ::= { sispm1040582lrtSNMPv3UserConfEntry 4 } sispm1040582lrtSNMPv3UserConfAuthenticationProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:None 1:MD5 2:SHA" ::= { sispm1040582lrtSNMPv3UserConfEntry 5 } sispm1040582lrtSNMPv3UserConfAuthenticationPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string identifying the authentication password phrase. For MD5 authentication protocol, the allowed string length is 8 to 32. For SHA authentication protocol, the allowed string length is 8 to 40. The allowed content is ASCII characters from 33 to 126." ::= { sispm1040582lrtSNMPv3UserConfEntry 6 } sispm1040582lrtSNMPv3UserConfPrivacyProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:None 1:DES 2:AES" ::= { sispm1040582lrtSNMPv3UserConfEntry 7 } sispm1040582lrtSNMPv3UserConfPrivacyPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string identifying the privacy password phrase. The allowed string length is 8 to 32, and the allowed content is ASCII characters from 33 to 126." ::= { sispm1040582lrtSNMPv3UserConfEntry 8 } sispm1040582lrtSNMPv3UserConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtSNMPv3UserConfEntry 9 } sispm1040582lrtSNMPv3GroupConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSNMPv3GroupConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of snmpv3 group configuration entry." ::= { sispm1040582lrtSnmp 7 } sispm1040582lrtSNMPv3GroupConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSNMPv3GroupConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for snmpv3 group configuration." INDEX { sispm1040582lrtSNMPv3GroupConfIndex } ::= { sispm1040582lrtSNMPv3GroupConfTable 1 } SISPM1040582LRTSNMPv3GroupConfEntry ::= SEQUENCE { sispm1040582lrtSNMPv3GroupConfIndex Integer32, sispm1040582lrtSNMPv3GroupConfSecurityModel Integer32, sispm1040582lrtSNMPv3GroupConfSecurityName DisplayString, sispm1040582lrtSNMPv3GroupConfGroupName DisplayString, sispm1040582lrtSNMPv3GroupConfRowStatus RowStatus } sispm1040582lrtSNMPv3GroupConfIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Group configuration index." ::= { sispm1040582lrtSNMPv3GroupConfEntry 1 } sispm1040582lrtSNMPv3GroupConfSecurityModel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1:v1 2:v2c 3:usm" ::= { sispm1040582lrtSNMPv3GroupConfEntry 2 } sispm1040582lrtSNMPv3GroupConfSecurityName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string identifying the security name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. This name is from the Community of Community configuration." ::= { sispm1040582lrtSNMPv3GroupConfEntry 3 } sispm1040582lrtSNMPv3GroupConfGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string identifying the group name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. " ::= { sispm1040582lrtSNMPv3GroupConfEntry 4 } sispm1040582lrtSNMPv3GroupConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtSNMPv3GroupConfEntry 5 } sispm1040582lrtSNMPv3ViewsConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSNMPv3ViewsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of snmpv3 view configuration entry." ::= { sispm1040582lrtSnmp 8 } sispm1040582lrtSNMPv3ViewsConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSNMPv3ViewsConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for snmpv3 view configuration." INDEX { sispm1040582lrtSNMPv3ViewsConfIndex } ::= { sispm1040582lrtSNMPv3ViewsConfTable 1 } SISPM1040582LRTSNMPv3ViewsConfEntry ::= SEQUENCE { sispm1040582lrtSNMPv3ViewsConfIndex Integer32, sispm1040582lrtSNMPv3ViewsConfViewName DisplayString, sispm1040582lrtSNMPv3ViewsConfViewType Integer32, sispm1040582lrtSNMPv3ViewsConfOIDSubtree DisplayString, sispm1040582lrtSNMPv3ViewsConfRowStatus RowStatus } sispm1040582lrtSNMPv3ViewsConfIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "view configuration index." ::= { sispm1040582lrtSNMPv3ViewsConfEntry 1 } sispm1040582lrtSNMPv3ViewsConfViewName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A string identifying the view name that this entry should belong to. The allowed string length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. " ::= { sispm1040582lrtSNMPv3ViewsConfEntry 2 } sispm1040582lrtSNMPv3ViewsConfViewType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1:included 2:excluded" ::= { sispm1040582lrtSNMPv3ViewsConfEntry 3 } sispm1040582lrtSNMPv3ViewsConfOIDSubtree OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The OID defining the root of the subtree to add to the named view. The allowed OID length is 1 to 128. The allowed string content is digital number or asterisk(*)" ::= { sispm1040582lrtSNMPv3ViewsConfEntry 4 } sispm1040582lrtSNMPv3ViewsConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtSNMPv3ViewsConfEntry 5 } sispm1040582lrtSNMPv3AccessConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSNMPv3AccessConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of snmpv3 access configuration entry." ::= { sispm1040582lrtSnmp 9 } sispm1040582lrtSNMPv3AccessConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSNMPv3AccessConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for snmpv3 access configuration." INDEX { sispm1040582lrtSNMPv3AccessConfIndex } ::= { sispm1040582lrtSNMPv3AccessConfTable 1 } SISPM1040582LRTSNMPv3AccessConfEntry ::= SEQUENCE { sispm1040582lrtSNMPv3AccessConfIndex Integer32, sispm1040582lrtSNMPv3AccessConfGroupName DisplayString, sispm1040582lrtSNMPv3AccessConfSecurityModel Integer32, sispm1040582lrtSNMPv3AccessConfSecurityLevel Integer32, sispm1040582lrtSNMPv3AccessConfReadViewName DisplayString, sispm1040582lrtSNMPv3AccessConfWriteViewName DisplayString, sispm1040582lrtSNMPv3AccessConfRowStatus RowStatus } sispm1040582lrtSNMPv3AccessConfIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Access configuration index" ::= { sispm1040582lrtSNMPv3AccessConfEntry 1 } sispm1040582lrtSNMPv3AccessConfGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Group name from Group configuration." ::= { sispm1040582lrtSNMPv3AccessConfEntry 2 } sispm1040582lrtSNMPv3AccessConfSecurityModel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:any 1:v1 2:v2c 3:usm" ::= { sispm1040582lrtSNMPv3AccessConfEntry 3 } sispm1040582lrtSNMPv3AccessConfSecurityLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1:NoAuth, NoPriv 2:Auth, NoPriv 3:Auth, Priv" ::= { sispm1040582lrtSNMPv3AccessConfEntry 4 } sispm1040582lrtSNMPv3AccessConfReadViewName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Read View Name from View configuration." ::= { sispm1040582lrtSNMPv3AccessConfEntry 5 } sispm1040582lrtSNMPv3AccessConfWriteViewName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Write View Name from View configuration." ::= { sispm1040582lrtSNMPv3AccessConfEntry 6 } sispm1040582lrtSNMPv3AccessConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create(5)/delete(6) entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtSNMPv3AccessConfEntry 7 } -- ======================================================================================================================= sispm1040582lrtDHCPServer OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 9 } sispm1040582lrtDHCPServerConf OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPServer 1 } sispm1040582lrtDHCPServerMode OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, Global Mode : 0: Disable, 1: Enable. " ::= { sispm1040582lrtDHCPServerConf 1 } sispm1040582lrtVLANModeTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVLANModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VLAN Mode for DHCP Server." ::= { sispm1040582lrtDHCPServerConf 2 } sispm1040582lrtVLANModeEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVLANModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sispm1040582lrtVLANModeTable." INDEX { sispm1040582lrtVLANModeIndex } ::= { sispm1040582lrtVLANModeTable 1 } SISPM1040582LRTVLANModeEntry ::= SEQUENCE { sispm1040582lrtVLANModeIndex Integer32, sispm1040582lrtVLANModeRangeLow Integer32, sispm1040582lrtVLANModeRangeHigh Integer32, sispm1040582lrtVLANModeEnable Integer32, sispm1040582lrtVLANModeRowStatus RowStatus } sispm1040582lrtVLANModeIndex OBJECT-TYPE SYNTAX Integer32 (1..2048) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN Mode table index, range: 1-2048." ::= {sispm1040582lrtVLANModeEntry 1 } sispm1040582lrtVLANModeRangeLow OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Mode low range: 1-4095." ::= {sispm1040582lrtVLANModeEntry 2 } sispm1040582lrtVLANModeRangeHigh OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Mode high range: 1-4095." ::= {sispm1040582lrtVLANModeEntry 3 } sispm1040582lrtVLANModeEnable OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN Mode Enable, Enable:1, Disable:0." ::= {sispm1040582lrtVLANModeEntry 4 } sispm1040582lrtVLANModeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtVLANModeEntry 5 } -- sispm1040582lrtDHCPServerBindingType OBJECT-TYPE -- SYNTAX Integer32 (0|1|2|3) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "default: None, -- Global Mode : -- 0: None, -- 1: Automatic, -- 2: Manual, -- 3: Expired. -- " -- ::= { sispm1040582lrtDHCPServerConf 2 } -- sispm1040582lrtDHCPServerBindingState OBJECT-TYPE -- SYNTAX Integer32 (0|1|2|3) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "default: None, -- Global Mode : -- 0: None, -- 1: Allocated, -- 2: Committed, -- 3: Expired. -- " -- ::= { sispm1040582lrtDHCPServerConf 3 } -- sispm1040582lrtDHCPServerBindingIP OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The DHCP Server Binding IP" -- ::= { sispm1040582lrtDHCPServerConf 4 } sispm1040582lrtDHCPServerExcludedIP OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPServer 2 } sispm1040582lrtExcludedIPTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTExcludedIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Excluded IP for DHCP Server." ::= { sispm1040582lrtDHCPServerExcludedIP 1 } sispm1040582lrtExcludedIPEntry OBJECT-TYPE SYNTAX SISPM1040582LRTExcludedIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the sispm1040582lrtExcludedIPTable." INDEX { sispm1040582lrtExcludedIPIndex } ::= { sispm1040582lrtExcludedIPTable 1 } SISPM1040582LRTExcludedIPEntry ::= SEQUENCE { sispm1040582lrtExcludedIPIndex Integer32, sispm1040582lrtExcludedIPRangeLow IpAddress, sispm1040582lrtExcludedIPRangeHigh IpAddress, sispm1040582lrtExcludedIPRowStatus RowStatus } sispm1040582lrtExcludedIPIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Excluded IP table index, range: 1-16." ::= {sispm1040582lrtExcludedIPEntry 1 } sispm1040582lrtExcludedIPRangeLow OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "ExcludedIP low range: 1-4095." ::= {sispm1040582lrtExcludedIPEntry 2 } sispm1040582lrtExcludedIPRangeHigh OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "ExcludedIP high range: 1-4095." ::= {sispm1040582lrtExcludedIPEntry 3 } sispm1040582lrtExcludedIPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= {sispm1040582lrtExcludedIPEntry 4 } sispm1040582lrtDHCPServerPoolConf OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPServer 3 } sispm1040582lrtDHCPServerPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTDHCPServerPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the entry information for DHCP Pool." ::= { sispm1040582lrtDHCPServerPoolConf 1 } sispm1040582lrtDHCPServerPoolEntry OBJECT-TYPE SYNTAX SISPM1040582LRTDHCPServerPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtDHCPServerConfIndex } ::= { sispm1040582lrtDHCPServerPoolTable 1 } SISPM1040582LRTDHCPServerPoolEntry ::= SEQUENCE { sispm1040582lrtDHCPServerConfIndex Integer32, sispm1040582lrtDHCPServerPoolName DisplayString, sispm1040582lrtDHCPServerPoolType Integer32, sispm1040582lrtDHCPServerIP IpAddress, sispm1040582lrtDHCPServerSubnetMask IpAddress, sispm1040582lrtDHCPServerLeaseTimeDays Integer32, sispm1040582lrtDHCPServerLeaseTimeHours Integer32, sispm1040582lrtDHCPServerLeaseTimeMinutes Integer32, sispm1040582lrtDHCPServerDomainName DisplayString, sispm1040582lrtDHCPServerBroadcastAddress IpAddress, sispm1040582lrtDHCPServerDefRouter1 IpAddress, sispm1040582lrtDHCPServerDefRouter2 IpAddress, sispm1040582lrtDHCPServerDefRouter3 IpAddress, sispm1040582lrtDHCPServerDefRouter4 IpAddress, sispm1040582lrtDHCPServerDNSServer1 IpAddress, sispm1040582lrtDHCPServerDNSServer2 IpAddress, sispm1040582lrtDHCPServerDNSServer3 IpAddress, sispm1040582lrtDHCPServerDNSServer4 IpAddress, sispm1040582lrtDHCPServerNTPServer1 IpAddress, sispm1040582lrtDHCPServerNTPServer2 IpAddress, sispm1040582lrtDHCPServerNTPServer3 IpAddress, sispm1040582lrtDHCPServerNTPServer4 IpAddress, sispm1040582lrtDHCPServerNetbiosType Integer32, sispm1040582lrtDHCPServerNetbiosScope DisplayString, sispm1040582lrtDHCPServerNetbiosNameServer1 IpAddress, sispm1040582lrtDHCPServerNetbiosNameServer2 IpAddress, sispm1040582lrtDHCPServerNetbiosNameServer3 IpAddress, sispm1040582lrtDHCPServerNetbiosNameServer4 IpAddress, sispm1040582lrtDHCPServerNisDomainName DisplayString, sispm1040582lrtDHCPServerNisServer1 IpAddress, sispm1040582lrtDHCPServerNisServer2 IpAddress, sispm1040582lrtDHCPServerNisServer3 IpAddress, sispm1040582lrtDHCPServerNisServer4 IpAddress, sispm1040582lrtDHCPServerClientIDType Integer32, sispm1040582lrtDHCPServerClientID DisplayString, sispm1040582lrtDHCPServerHWAddr DisplayString, sispm1040582lrtDHCPServerClientName DisplayString, sispm1040582lrtDHCPServerVendorClassID1 DisplayString, sispm1040582lrtDHCPServerVendorSpecificInfo1 DisplayString, sispm1040582lrtDHCPServerVendorClassID2 DisplayString, sispm1040582lrtDHCPServerVendorSpecificInfo2 DisplayString, sispm1040582lrtDHCPServerVendorClassID3 DisplayString, sispm1040582lrtDHCPServerVendorSpecificInfo3 DisplayString, sispm1040582lrtDHCPServerVendorClassID4 DisplayString, sispm1040582lrtDHCPServerVendorSpecificInfo4 DisplayString, -- sispm1040582lrtDHCPServerVendorClassID5 DisplayString, -- sispm1040582lrtDHCPServerVendorSpecificInfo5 DisplayString, -- sispm1040582lrtDHCPServerVendorClassID6 DisplayString, -- sispm1040582lrtDHCPServerVendorSpecificInfo6 DisplayString, -- sispm1040582lrtDHCPServerVendorClassID7 DisplayString, -- sispm1040582lrtDHCPServerVendorSpecificInfo7 DisplayString, -- sispm1040582lrtDHCPServerVendorClassID8 DisplayString, -- sispm1040582lrtDHCPServerVendorSpecificInfo8 DisplayString, sispm1040582lrtDHCPServerLightingServer DisplayString, sispm1040582lrtDHCPServerRowStatus RowStatus } sispm1040582lrtDHCPServerConfIndex OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION " pool, range : 1 - 64. " ::= { sispm1040582lrtDHCPServerPoolEntry 1 } sispm1040582lrtDHCPServerPoolName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP pool name. " ::= { sispm1040582lrtDHCPServerPoolEntry 2 } sispm1040582lrtDHCPServerPoolType OBJECT-TYPE SYNTAX Integer32(0|1|2) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Pool Type. 0:None 1:Network 2:Host, please set DHCP Server IP first." ::= { sispm1040582lrtDHCPServerPoolEntry 3 } sispm1040582lrtDHCPServerIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IP. " ::= { sispm1040582lrtDHCPServerPoolEntry 4 } sispm1040582lrtDHCPServerSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Subnet Mask. " ::= { sispm1040582lrtDHCPServerPoolEntry 5} sispm1040582lrtDHCPServerLeaseTimeDays OBJECT-TYPE SYNTAX Integer32(0..365) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Lease Time:Days. " ::= { sispm1040582lrtDHCPServerPoolEntry 6 } sispm1040582lrtDHCPServerLeaseTimeHours OBJECT-TYPE SYNTAX Integer32(0..23) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Lease Time:Hours. " ::= { sispm1040582lrtDHCPServerPoolEntry 7 } sispm1040582lrtDHCPServerLeaseTimeMinutes OBJECT-TYPE SYNTAX Integer32(0..59) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Lease Time:Minutes. " ::= { sispm1040582lrtDHCPServerPoolEntry 8 } sispm1040582lrtDHCPServerDomainName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Domain Name. " ::= { sispm1040582lrtDHCPServerPoolEntry 9 } sispm1040582lrtDHCPServerBroadcastAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Broadcast Address. " ::= { sispm1040582lrtDHCPServerPoolEntry 10 } sispm1040582lrtDHCPServerDefRouter1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Default Router 1. " ::= { sispm1040582lrtDHCPServerPoolEntry 11 } sispm1040582lrtDHCPServerDefRouter2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Default Router 2. " ::= { sispm1040582lrtDHCPServerPoolEntry 12 } sispm1040582lrtDHCPServerDefRouter3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Default Router 3. " ::= { sispm1040582lrtDHCPServerPoolEntry 13 } sispm1040582lrtDHCPServerDefRouter4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server IPv4 Default Router 4. " ::= { sispm1040582lrtDHCPServerPoolEntry 14 } sispm1040582lrtDHCPServerDNSServer1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server DNS Server 1. " ::= { sispm1040582lrtDHCPServerPoolEntry 15 } sispm1040582lrtDHCPServerDNSServer2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server DNS Server 2. " ::= { sispm1040582lrtDHCPServerPoolEntry 16 } sispm1040582lrtDHCPServerDNSServer3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server DNS Server 3. " ::= { sispm1040582lrtDHCPServerPoolEntry 17 } sispm1040582lrtDHCPServerDNSServer4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server DNS Server 4. " ::= { sispm1040582lrtDHCPServerPoolEntry 18 } sispm1040582lrtDHCPServerNTPServer1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server NTP Server 1. " ::= { sispm1040582lrtDHCPServerPoolEntry 19 } sispm1040582lrtDHCPServerNTPServer2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server NTP Server 2. " ::= { sispm1040582lrtDHCPServerPoolEntry 20 } sispm1040582lrtDHCPServerNTPServer3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server NTP Server 3. " ::= { sispm1040582lrtDHCPServerPoolEntry 21 } sispm1040582lrtDHCPServerNTPServer4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server NTP Server 4. " ::= { sispm1040582lrtDHCPServerPoolEntry 22 } sispm1040582lrtDHCPServerNetbiosType OBJECT-TYPE SYNTAX Integer32(1..4) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Netbios Node Type. 0:None 1:B-node 2:P-node 3:M-node 4:H-node" ::= { sispm1040582lrtDHCPServerPoolEntry 23 } sispm1040582lrtDHCPServerNetbiosScope OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Netbios Scope. " ::= { sispm1040582lrtDHCPServerPoolEntry 24 } sispm1040582lrtDHCPServerNetbiosNameServer1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Netbios Name Server 1. " ::= { sispm1040582lrtDHCPServerPoolEntry 25 } sispm1040582lrtDHCPServerNetbiosNameServer2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Netbios Name Server 2. " ::= { sispm1040582lrtDHCPServerPoolEntry 26 } sispm1040582lrtDHCPServerNetbiosNameServer3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Netbios Name Server 3. " ::= { sispm1040582lrtDHCPServerPoolEntry 27 } sispm1040582lrtDHCPServerNetbiosNameServer4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Netbios Name Server 4. " ::= { sispm1040582lrtDHCPServerPoolEntry 28 } sispm1040582lrtDHCPServerNisDomainName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Nis Domain Name. " ::= { sispm1040582lrtDHCPServerPoolEntry 29 } sispm1040582lrtDHCPServerNisServer1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Nis Server 1. " ::= { sispm1040582lrtDHCPServerPoolEntry 30 } sispm1040582lrtDHCPServerNisServer2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Nis Server 2. " ::= { sispm1040582lrtDHCPServerPoolEntry 31 } sispm1040582lrtDHCPServerNisServer3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Nis Server 3. " ::= { sispm1040582lrtDHCPServerPoolEntry 32 } sispm1040582lrtDHCPServerNisServer4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Nis Server 4. " ::= { sispm1040582lrtDHCPServerPoolEntry 33 } sispm1040582lrtDHCPServerClientIDType OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Client ID Type. 0:None 1:FQDN 2:MAC" ::= { sispm1040582lrtDHCPServerPoolEntry 34 } sispm1040582lrtDHCPServerClientID OBJECT-TYPE SYNTAX DisplayString(SIZE (0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Pool Client ID. " ::= { sispm1040582lrtDHCPServerPoolEntry 35 } sispm1040582lrtDHCPServerHWAddr OBJECT-TYPE SYNTAX DisplayString(SIZE (0..17)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Pool Hardware Address. " ::= { sispm1040582lrtDHCPServerPoolEntry 36 } sispm1040582lrtDHCPServerClientName OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Pool Client Name. " ::= { sispm1040582lrtDHCPServerPoolEntry 37 } sispm1040582lrtDHCPServerVendorClassID1 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Class ID 1. Please also set VendorSpecificInfo1." ::= { sispm1040582lrtDHCPServerPoolEntry 38 } sispm1040582lrtDHCPServerVendorSpecificInfo1 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Specific Info 1. Please also set VendorClassID1." ::= { sispm1040582lrtDHCPServerPoolEntry 39 } sispm1040582lrtDHCPServerVendorClassID2 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Class ID 2. Please also set VendorSpecificInfo2." ::= { sispm1040582lrtDHCPServerPoolEntry 40 } sispm1040582lrtDHCPServerVendorSpecificInfo2 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Specific Info 2. Please also set VendorClassID2." ::= { sispm1040582lrtDHCPServerPoolEntry 41 } sispm1040582lrtDHCPServerVendorClassID3 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Class ID 3. Please also set VendorSpecificInfo3." ::= { sispm1040582lrtDHCPServerPoolEntry 42 } sispm1040582lrtDHCPServerVendorSpecificInfo3 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Specific Info 3. Please also set VendorClassID3." ::= { sispm1040582lrtDHCPServerPoolEntry 43 } sispm1040582lrtDHCPServerVendorClassID4 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Class ID 4. Please also set VendorSpecificInfo4." ::= { sispm1040582lrtDHCPServerPoolEntry 44 } sispm1040582lrtDHCPServerVendorSpecificInfo4 OBJECT-TYPE SYNTAX DisplayString(SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " DHCP Server Vendor Specific Info 4. Please also set VendorClassID4." ::= { sispm1040582lrtDHCPServerPoolEntry 45 } --sispm1040582lrtDHCPServerVendorClassID5 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..64)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Class ID 5. Please also set VendorSpecificInfo5." -- ::= { sispm1040582lrtDHCPServerPoolEntry 46 } -- --sispm1040582lrtDHCPServerVendorSpecificInfo5 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..32)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Specific Info 5. Please also set VendorClassID5." -- ::= { sispm1040582lrtDHCPServerPoolEntry 47 } -- --sispm1040582lrtDHCPServerVendorClassID6 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..64)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Class ID 6. Please also set VendorSpecificInfo6." -- ::= { sispm1040582lrtDHCPServerPoolEntry 48 } -- --sispm1040582lrtDHCPServerVendorSpecificInfo6 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..32)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Specific Info 6. Please also set VendorClassID6." -- ::= { sispm1040582lrtDHCPServerPoolEntry 49 } -- --sispm1040582lrtDHCPServerVendorClassID7 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..64)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Class ID 7. Please also set VendorSpecificInfo7." -- ::= { sispm1040582lrtDHCPServerPoolEntry 50 } -- --sispm1040582lrtDHCPServerVendorSpecificInfo7 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..32)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Specific Info 7. Please also set VendorClassID7." -- ::= { sispm1040582lrtDHCPServerPoolEntry 51 } -- --sispm1040582lrtDHCPServerVendorClassID8 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..64)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Class ID 8. Please also set VendorSpecificInfo8." -- ::= { sispm1040582lrtDHCPServerPoolEntry 52 } -- --sispm1040582lrtDHCPServerVendorSpecificInfo8 OBJECT-TYPE -- SYNTAX DisplayString(SIZE (0..32)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- " DHCP Server Vendor Specific Info 8. Please also set VendorClassID8." -- ::= { sispm1040582lrtDHCPServerPoolEntry 53 } sispm1040582lrtDHCPServerLightingServer OBJECT-TYPE SYNTAX DisplayString(SIZE (7..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "DHCP option 229. Specify a lighting server available to the client." ::= { sispm1040582lrtDHCPServerPoolEntry 54 } sispm1040582lrtDHCPServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= {sispm1040582lrtDHCPServerPoolEntry 55 } -- ======================================================================================================================= sispm1040582lrtVLANConf OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 10 } sispm1040582lrtVLAN OBJECT IDENTIFIER ::= { sispm1040582lrtVLANConf 2} sispm1040582lrtVlanStatus OBJECT IDENTIFIER ::= { sispm1040582lrtVLAN 6 } -- -- ======================================================================================================================= -- Start sispm1040582lrtVlan group -- ======================================================================================================================= sispm1040582lrtVlanExistingVLANs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This field shows the VLANs that are created on the switch. More VLANs may be created by using a list syntax where the individual elements are separated by commas. Ranges are specified with a dash separating the lower and upper bound. The following example will create VLANs 1, 10, 11, 12 , 13, 200, and 300: 1,10-13,200,300. default: 1." ::= { sispm1040582lrtVLAN 1 } sispm1040582lrtVlanEthertypeforCustomSPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S-ports. The setting is in force for all ports whose Port Type is set to S-Custom-Port. range: 0600-ffff, default: 88a8." ::= { sispm1040582lrtVLAN 2 } sispm1040582lrtVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configure Vlan ports Configuration mode. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtVLAN 3 } sispm1040582lrtVlanEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Vlan entry." INDEX { ifIndex } ::= { sispm1040582lrtVlanTable 1 } SISPM1040582LRTVlanEntry ::= SEQUENCE { sispm1040582lrtVlanMode INTEGER, sispm1040582lrtVlanPortVLAN Integer32, sispm1040582lrtVlanPortType INTEGER, sispm1040582lrtVlanIngressFiltering AdminMode, sispm1040582lrtVlanVLANTrunking AdminMode, sispm1040582lrtVlanIngressAcceptance INTEGER, sispm1040582lrtVlanEgressTagging INTEGER, sispm1040582lrtVlanAllowedVLANs DisplayString, sispm1040582lrtVlanForbiddenVLANs DisplayString } sispm1040582lrtVlanMode OBJECT-TYPE SYNTAX INTEGER{access(0), trunk(1), hybrid(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "The port mode determines the fundamental behavior of the port in question. A port can be in one of three modes as described below. 0: access, 1: trunk, 2: hybrid." DEFVAL { access } ::= { sispm1040582lrtVlanEntry 2 } sispm1040582lrtVlanPortVLAN OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the port's VLAN ID (a.k.a. PVID). range: 1-4095, default: 1." ::= { sispm1040582lrtVlanEntry 3 } sispm1040582lrtVlanPortType OBJECT-TYPE SYNTAX INTEGER { unaware(0), cPort(1), sPort(2), sCustomPort(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ports in hybrid mode allow for changing the port type, that is, whether a frame's VLAN tag is used to classify the frame on ingress to a particular VLAN, and if so, which TPID it reacts on. Likewise, on egress, the Port Type determines the TPID of the tag, if a tag is required. 0: unaware, 1: c-Port, 2: s-Port, 3: s-Custom-Port." DEFVAL { cPort } ::= { sispm1040582lrtVlanEntry 4 } sispm1040582lrtVlanIngressFiltering OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid ports allow for changing ingress filtering. Access and Trunk ports always have ingress filtering enabled.If ingress filtering is enabled, frames classified to a VLAN that the port is not a member of get discarded." ::= { sispm1040582lrtVlanEntry 5 } sispm1040582lrtVlanVLANTrunking OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Trunk and Hybrid ports allow for enabling VLAN trunking. When VLAN trunking is enabled, frames classified to unknown VLANs are accepted on the port whether ingress filtering is enabled or not." DEFVAL { disable } ::= { sispm1040582lrtVlanEntry 6 } sispm1040582lrtVlanIngressAcceptance OBJECT-TYPE SYNTAX INTEGER { taggedAndUntagged ( 0 ), taggedOnly ( 1 ), untaggedOnly ( 2 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "Hybrid ports allow for changing the type of frames that are accepted on ingress. 0: Tagged and Untagged, 1: Tagged Only, 2: Untagged Only." ::= { sispm1040582lrtVlanEntry 7 } sispm1040582lrtVlanEgressTagging OBJECT-TYPE SYNTAX INTEGER { untagPortVlan ( 0 ), tagAll ( 1 ), untagAll ( 2 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "Ports in Trunk and Hybrid mode may control the tagging of frames on egress. 0: Untag Port VLAN, 1: Tag All, 2: Untag All." ::= { sispm1040582lrtVlanEntry 8 } sispm1040582lrtVlanAllowedVLANs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Ports in Trunk and Hybrid mode may control which VLANs they are allowed to become members of. Access ports can only be member of one VLAN, the Access VLAN. range: 1~4095. '-': Allowed VLANs is empty." ::= { sispm1040582lrtVlanEntry 9 } sispm1040582lrtVlanForbiddenVLANs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "A port may be configured to never be member of one or more VLANs. This is particularly useful when dynamic VLAN protocols like MVRP and GVRP must be prevented from dynamically adding ports to VLANs. range: 1~4095. '-': Forbidden VLANs is empty." ::= { sispm1040582lrtVlanEntry 10 } --sispm1040582lrtVLANMembershipStatusTable sispm1040582lrtVLANMembershipStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVLANMembershipStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan membership Status table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtVlanStatus 1 } sispm1040582lrtVLANMembershipStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVLANMembershipStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Vlan membership Status entry." INDEX { ifIndex, sispm1040582lrtVLANMembershipVlanID } ::= { sispm1040582lrtVLANMembershipStatusTable 1 } SISPM1040582LRTVLANMembershipStatusEntry ::= SEQUENCE { sispm1040582lrtVLANMembershipVlanID Integer32, sispm1040582lrtVLANMembershipStatus INTEGER } sispm1040582lrtVLANMembershipVlanID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID for which the Port members are displayed." ::= { sispm1040582lrtVLANMembershipStatusEntry 2 } sispm1040582lrtVLANMembershipStatus OBJECT-TYPE SYNTAX INTEGER { portIsNotInVlan ( 0 ), portIncludedInVlan ( 1 ), portInForbiddenPortList( 2 ), portInForbiddenPortListAndVlan( 3 ) } MAX-ACCESS read-only STATUS current DESCRIPTION "portIsNotInVlan(0): A port is nothing in a VLAN. portIncludedInVlan(1): A port is included in a VLAN. portInForbiddenPortList(2): A port is in the forbidden port list. portInForbiddenPortListAndVlan(3): A port is in the forbidden port list and at the same time attempted included in the VLAN." ::= { sispm1040582lrtVLANMembershipStatusEntry 3 } --sispm1040582lrtVLANPortStatusTable sispm1040582lrtVLANPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVLANPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlan port status table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtVlanStatus 2 } sispm1040582lrtVLANPortStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVLANPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vlan port status entry." INDEX { ifIndex } ::= { sispm1040582lrtVLANPortStatusTable 1 } SISPM1040582LRTVLANPortStatusEntry ::= SEQUENCE { sispm1040582lrtVLANPortStatusPortType DisplayString, sispm1040582lrtVLANPortStatusIngressFiltering AdminMode, sispm1040582lrtVLANPortStatusFrameType DisplayString, sispm1040582lrtVLANPortStatusPortVLANID Integer32, sispm1040582lrtVLANPortStatusTxTag DisplayString, sispm1040582lrtVLANPortStatusUntaggedVLANID Integer32, sispm1040582lrtVLANPortStatusConflicts DisplayString } sispm1040582lrtVLANPortStatusPortType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the port type (Unaware, C-Port, S-Port, S-Custom-Port.) that a given user wants to configure on the port.The field is empty if not overridden by the selected user." ::= { sispm1040582lrtVLANPortStatusEntry 2 } sispm1040582lrtVLANPortStatusIngressFiltering OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-only STATUS current DESCRIPTION "Shows whether a given user wants ingress filtering enabled or not." ::= { sispm1040582lrtVLANPortStatusEntry 3 } sispm1040582lrtVLANPortStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the acceptable frame types (All, Taged, Untagged) that a given user wants to configure on the port. The field is empty if not overridden by the selected user." ::= { sispm1040582lrtVLANPortStatusEntry 4 } sispm1040582lrtVLANPortStatusPortVLANID OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Port VLAN ID (PVID) that a given user wants the port to have. The field is 0 if not overridden by the selected user." ::= { sispm1040582lrtVLANPortStatusEntry 5 } sispm1040582lrtVLANPortStatusTxTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the Tx Tag requirements (Tag All, Tag PVID, Tag UVID, Untag All, Untag PVID, Untag UVID) that a given user has on a port.The field is empty if not overridden by the selected user." ::= { sispm1040582lrtVLANPortStatusEntry 6 } sispm1040582lrtVLANPortStatusUntaggedVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "If Tx Tag is overridden by the selected user and is set to Tag or Untag UVID, then this field will show the VLAN ID the user wants to tag or untag on egress. The field is 0 if not overridden by the selected user." ::= { sispm1040582lrtVLANPortStatusEntry 7 } sispm1040582lrtVLANPortStatusConflicts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Two users may have conflicting requirements to a port's configuration. For instance, one user may require all frames to be tagged on egress while another requires all frames to be untagged on egress.Since both users cannot win, this gives rise to a conflict, which is solved in a prioritized way. The Administrator has the least priority. Other software modules are prioritized according to their position in the drop-down list: The higher in the list, the higher priority. If conflicts exist, it will be displayed as 'Yes'." ::= { sispm1040582lrtVLANPortStatusEntry 8 } sispm1040582lrtSystemDIDO OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 11 } sispm1040582lrtSystemDIMode OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "System digital in mode. 0:Low 1:High " ::= { sispm1040582lrtSystemDIDO 1 } sispm1040582lrtSystemDOMode OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "System digital out mode. 0:Close 1:Open " ::= { sispm1040582lrtSystemDIDO 2 } sispm1040582lrtSystemDIEventDescNormal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Customize event message. You can describe the event in detail. " ::= { sispm1040582lrtSystemDIDO 3 } sispm1040582lrtSystemDIEventDescAbnormal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Customize event message. You can describe the event in detail. " ::= { sispm1040582lrtSystemDIDO 4 } sispm1040582lrtSystemDOAutoRecovery OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of Auto Recovery. 0:Disable 1:Enable " ::= { sispm1040582lrtSystemDIDO 5 } sispm1040582lrtSystemDIRebootSystem OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the function of DI Reboot System. 0:Disable 1:When DI was changed to abnormal. " ::= { sispm1040582lrtSystemDIDO 6 } sispm1040582lrtNTPConf OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 12 } sispm1040582lrtNTPConfigAutomatic OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the Automatic mode operation. Possible modes are: 0:Disable, NTP servers available from the config. 1:Enable, NTP servers available from the DHCP." ::= { sispm1040582lrtNTPConf 2 } sispm1040582lrtNTPConfigTimeSyncInterval OBJECT-TYPE SYNTAX Integer32 (5|10|15|30|60|120) MAX-ACCESS read-write STATUS current DESCRIPTION "Time-Sync Interval. Valid values are restricted to 5,10,15,30,60,120 minutes. " ::= { sispm1040582lrtNTPConf 3 } sispm1040582lrtNTPConfigServerAddress1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Provide the IPv4 or IPv6 address of a NTP server." ::= { sispm1040582lrtNTPConf 4 } sispm1040582lrtNTPConfigServerAddress2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Provide the IPv4 or IPv6 address of a NTP server." ::= { sispm1040582lrtNTPConf 5 } sispm1040582lrtNTPConfigServerAddress3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Provide the IPv4 or IPv6 address of a NTP server." ::= { sispm1040582lrtNTPConf 6 } sispm1040582lrtNTPConfigServerAddress4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Provide the IPv4 or IPv6 address of a NTP server." ::= { sispm1040582lrtNTPConf 7 } sispm1040582lrtNTPConfigServerAddress5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Provide the IPv4 or IPv6 address of a NTP server." ::= { sispm1040582lrtNTPConf 8 } sispm1040582lrtTemperature OBJECT IDENTIFIER ::= { sispm1040582lrtSystem 13 } sispm1040582lrtTemperature1 OBJECT IDENTIFIER ::= { sispm1040582lrtTemperature 1 } sispm1040582lrtTemperature1Celsius OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Celsius" ::= { sispm1040582lrtTemperature1 1 } sispm1040582lrtTemperature1Fahrenheit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Fahrenheit" ::= { sispm1040582lrtTemperature1 2 } sispm1040582lrtTemperature2 OBJECT IDENTIFIER ::= { sispm1040582lrtTemperature 2 } sispm1040582lrtTemperature2Celsius OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Celsius" ::= { sispm1040582lrtTemperature2 1 } sispm1040582lrtTemperature2Fahrenheit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Fahrenheit" ::= { sispm1040582lrtTemperature2 2 } -- ======================================================================================================================= sispm1040582lrtConfiguration OBJECT IDENTIFIER ::= { sispm1040582lrtProductId 2 } sispm1040582lrtPort OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 1 } sispm1040582lrtPortConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show port configurations. " ::= { sispm1040582lrtPort 1 } sispm1040582lrtPortConfigurationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPortConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPortConfPort } ::= { sispm1040582lrtPortConfigurationTable 1 } SISPM1040582LRTPortConfigurationEntry ::= SEQUENCE { sispm1040582lrtPortConfPort Integer32, sispm1040582lrtPortConfPortMedia DisplayString, sispm1040582lrtPortConfLink DisplayString, sispm1040582lrtPortConfCurrentSpeed DisplayString, sispm1040582lrtPortConfSpeed Integer32, sispm1040582lrtPortConfCurrentFlowControlRx Integer32, sispm1040582lrtPortConfCurrentFlowControlTx Integer32, sispm1040582lrtPortConfFlowControl Integer32, sispm1040582lrtPortConfMaxFrameSize Integer32, sispm1040582lrtPortConfExcessiveCollisionMode Integer32, -- sispm1040582lrtPortConfPowerControl Integer32, sispm1040582lrtPortConfDescription DisplayString, sispm1040582lrtPortConfFrameLengthCheck Integer32 } sispm1040582lrtPortConfPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtPortConfigurationEntry 1 } sispm1040582lrtPortConfPortMedia OBJECT-TYPE SYNTAX DisplayString(SIZE (1..4)) MAX-ACCESS read-only STATUS current DESCRIPTION " Show port media. " ::= { sispm1040582lrtPortConfigurationEntry 2 } sispm1040582lrtPortConfLink OBJECT-TYPE SYNTAX DisplayString(SIZE (2..4)) MAX-ACCESS read-only STATUS current DESCRIPTION " The current link state. " ::= { sispm1040582lrtPortConfigurationEntry 3 } sispm1040582lrtPortConfCurrentSpeed OBJECT-TYPE SYNTAX DisplayString(SIZE (6..12)) MAX-ACCESS read-only STATUS current DESCRIPTION " The current link speed of the port. " ::= { sispm1040582lrtPortConfigurationEntry 4 } sispm1040582lrtPortConfSpeed OBJECT-TYPE SYNTAX Integer32 (0..11) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, 0: disable state, 1: auto, 2: 10 Half, 3: 10 Full, 4: 100 Half, 5: 100 Full, 6: 1G full, only 'Dual Media' port have 7-11 option. Dual Media port default: 7, 7: SFP_Auto_AMS, 8: 100FX_AMS, 9: 1000X_AMS, 10: 100FX, 11: 1000X, 12: 10G Full. " ::= { sispm1040582lrtPortConfigurationEntry 5 } sispm1040582lrtPortConfCurrentFlowControlRx OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "0: disable 1: enable 2: not support. " ::= { sispm1040582lrtPortConfigurationEntry 6 } sispm1040582lrtPortConfCurrentFlowControlTx OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "0: disable 1: enable 2: not support. " ::= { sispm1040582lrtPortConfigurationEntry 7 } sispm1040582lrtPortConfFlowControl OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable 1: enable 2: not support. " ::= { sispm1040582lrtPortConfigurationEntry 8 } sispm1040582lrtPortConfMaxFrameSize OBJECT-TYPE SYNTAX Integer32 (1518..9600) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 9600 , range : 1518 - 9600 " ::= { sispm1040582lrtPortConfigurationEntry 9 } sispm1040582lrtPortConfExcessiveCollisionMode OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, Excessive Collision Mode : 0: Discard, 1: Restart, 2: not support. " ::= { sispm1040582lrtPortConfigurationEntry 10 } --sispm1040582lrtPortConfPowerControl OBJECT-TYPE -- SYNTAX Integer32 (0..3) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 0, -- PowerControl : -- 0: disable, -- 1: Actiphy, -- 2: Dynamic (perfectReach), -- 3: Enable, -- 4: not support. -- " -- ::= { sispm1040582lrtPortConfigurationEntry 11 } sispm1040582lrtPortConfDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Interface specific description. Up to 128 characters describing this interface. " ::= { sispm1040582lrtPortConfigurationEntry 12 } sispm1040582lrtPortConfFrameLengthCheck OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable 1: enable" ::= { sispm1040582lrtPortConfigurationEntry 13 } sispm1040582lrtPortTrafficStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPortTrafficStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPort 2 } sispm1040582lrtPortTrafficStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPortTrafficStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPortTrafficStatisticsPort } ::= { sispm1040582lrtPortTrafficStatisticsTable 1 } SISPM1040582LRTPortTrafficStatisticsEntry ::= SEQUENCE { sispm1040582lrtPortTrafficStatisticsPort Integer32, sispm1040582lrtPortTrafficStatisticsClear Integer32, sispm1040582lrtPortTrafficRxPackets Counter64, sispm1040582lrtPortTrafficRxOctets Counter64, sispm1040582lrtPortTrafficRxUnicast Counter64, sispm1040582lrtPortTrafficRxMulticast Counter64, sispm1040582lrtPortTrafficRxBroadcast Counter64, sispm1040582lrtPortTrafficRxPause Counter64, sispm1040582lrtPortTrafficRx64Bytes Counter64, sispm1040582lrtPortTrafficRx65to127Bytes Counter64, sispm1040582lrtPortTrafficRx128to255Bytes Counter64, sispm1040582lrtPortTrafficRx256to511Bytes Counter64, sispm1040582lrtPortTrafficRx512to1023Bytes Counter64, sispm1040582lrtPortTrafficRx1024to1526Bytes Counter64, sispm1040582lrtPortTrafficRxExceecd1527Bytes Counter64, sispm1040582lrtPortTrafficRxQ0 Counter64, sispm1040582lrtPortTrafficRxQ1 Counter64, sispm1040582lrtPortTrafficRxQ2 Counter64, sispm1040582lrtPortTrafficRxQ3 Counter64, sispm1040582lrtPortTrafficRxQ4 Counter64, sispm1040582lrtPortTrafficRxQ5 Counter64, sispm1040582lrtPortTrafficRxQ6 Counter64, sispm1040582lrtPortTrafficRxQ7 Counter64, sispm1040582lrtPortTrafficRxDrops Counter64, sispm1040582lrtPortTrafficRxCRCorAlignment Counter64, sispm1040582lrtPortTrafficRxUndersize Counter64, sispm1040582lrtPortTrafficRxOversize Counter64, sispm1040582lrtPortTrafficRxFragments Counter64, sispm1040582lrtPortTrafficRxJabber Counter64, sispm1040582lrtPortTrafficRxFiltered Counter64, sispm1040582lrtPortTrafficTxPackets Counter64, sispm1040582lrtPortTrafficTxOctets Counter64, sispm1040582lrtPortTrafficTxUnicast Counter64, sispm1040582lrtPortTrafficTxMulticast Counter64, sispm1040582lrtPortTrafficTxBroadcast Counter64, sispm1040582lrtPortTrafficTxPause Counter64, sispm1040582lrtPortTrafficTx64Bytes Counter64, sispm1040582lrtPortTrafficTx65to127Bytes Counter64, sispm1040582lrtPortTrafficTx128to255Bytes Counter64, sispm1040582lrtPortTrafficTx256to511Bytes Counter64, sispm1040582lrtPortTrafficTx512to1023Bytes Counter64, sispm1040582lrtPortTrafficTx1024to1526Bytes Counter64, sispm1040582lrtPortTrafficTxExceecd1527Bytes Counter64, sispm1040582lrtPortTrafficTxQ0 Counter64, sispm1040582lrtPortTrafficTxQ1 Counter64, sispm1040582lrtPortTrafficTxQ2 Counter64, sispm1040582lrtPortTrafficTxQ3 Counter64, sispm1040582lrtPortTrafficTxQ4 Counter64, sispm1040582lrtPortTrafficTxQ5 Counter64, sispm1040582lrtPortTrafficTxQ6 Counter64, sispm1040582lrtPortTrafficTxQ7 Counter64, sispm1040582lrtPortTrafficTxDrops Counter64, sispm1040582lrtPortTrafficTxLateOrExcColl Counter64 } sispm1040582lrtPortTrafficStatisticsPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 1 } sispm1040582lrtPortTrafficStatisticsClear OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 2 } sispm1040582lrtPortTrafficRxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 3 } sispm1040582lrtPortTrafficRxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 4 } sispm1040582lrtPortTrafficRxUnicast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 5 } sispm1040582lrtPortTrafficRxMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 6 } sispm1040582lrtPortTrafficRxBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 7 } sispm1040582lrtPortTrafficRxPause OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 8 } sispm1040582lrtPortTrafficRx64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 9 } sispm1040582lrtPortTrafficRx65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 10 } sispm1040582lrtPortTrafficRx128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 11 } sispm1040582lrtPortTrafficRx256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 12 } sispm1040582lrtPortTrafficRx512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 13 } sispm1040582lrtPortTrafficRx1024to1526Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 14 } sispm1040582lrtPortTrafficRxExceecd1527Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 15 } sispm1040582lrtPortTrafficRxQ0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 16 } sispm1040582lrtPortTrafficRxQ1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 17 } sispm1040582lrtPortTrafficRxQ2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 18 } sispm1040582lrtPortTrafficRxQ3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 19 } sispm1040582lrtPortTrafficRxQ4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 20 } sispm1040582lrtPortTrafficRxQ5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 21 } sispm1040582lrtPortTrafficRxQ6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 22 } sispm1040582lrtPortTrafficRxQ7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 23 } sispm1040582lrtPortTrafficRxDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 24 } sispm1040582lrtPortTrafficRxCRCorAlignment OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 25 } sispm1040582lrtPortTrafficRxUndersize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 26 } sispm1040582lrtPortTrafficRxOversize OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 27 } sispm1040582lrtPortTrafficRxFragments OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 28 } sispm1040582lrtPortTrafficRxJabber OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 29 } sispm1040582lrtPortTrafficRxFiltered OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 30 } sispm1040582lrtPortTrafficTxPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 31 } sispm1040582lrtPortTrafficTxOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 32 } sispm1040582lrtPortTrafficTxUnicast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 33 } sispm1040582lrtPortTrafficTxMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 34 } sispm1040582lrtPortTrafficTxBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 35 } sispm1040582lrtPortTrafficTxPause OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 36 } sispm1040582lrtPortTrafficTx64Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 37 } sispm1040582lrtPortTrafficTx65to127Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 38 } sispm1040582lrtPortTrafficTx128to255Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 39 } sispm1040582lrtPortTrafficTx256to511Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 40 } sispm1040582lrtPortTrafficTx512to1023Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 41 } sispm1040582lrtPortTrafficTx1024to1526Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 42 } sispm1040582lrtPortTrafficTxExceecd1527Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 43 } sispm1040582lrtPortTrafficTxQ0 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 44 } sispm1040582lrtPortTrafficTxQ1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 45 } sispm1040582lrtPortTrafficTxQ2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 46 } sispm1040582lrtPortTrafficTxQ3 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 47 } sispm1040582lrtPortTrafficTxQ4 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 48 } sispm1040582lrtPortTrafficTxQ5 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 49 } sispm1040582lrtPortTrafficTxQ6 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 50 } sispm1040582lrtPortTrafficTxQ7 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 51 } sispm1040582lrtPortTrafficTxDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 52 } sispm1040582lrtPortTrafficTxLateOrExcColl OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortTrafficStatisticsEntry 53 } sispm1040582lrtPortQoSStatistics OBJECT IDENTIFIER ::= { sispm1040582lrtPort 3 } sispm1040582lrtPortQoSStatisticsClear OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-only STATUS current DESCRIPTION "default: 0 0: none 1: clear " ::= { sispm1040582lrtPortQoSStatistics 1 } sispm1040582lrtPortQoSStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPortQoSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatistics 2 } sispm1040582lrtPortQoSStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPortQoSStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPortQoSStatisticsPort } ::= { sispm1040582lrtPortQoSStatisticsTable 1 } SISPM1040582LRTPortQoSStatisticsEntry ::= SEQUENCE { sispm1040582lrtPortQoSStatisticsPort Integer32, sispm1040582lrtPortQoSQ0Rx Counter64, sispm1040582lrtPortQoSQ0Tx Counter64, sispm1040582lrtPortQoSQ1Rx Counter64, sispm1040582lrtPortQoSQ1Tx Counter64, sispm1040582lrtPortQoSQ2Rx Counter64, sispm1040582lrtPortQoSQ2Tx Counter64, sispm1040582lrtPortQoSQ3Rx Counter64, sispm1040582lrtPortQoSQ3Tx Counter64, sispm1040582lrtPortQoSQ4Rx Counter64, sispm1040582lrtPortQoSQ4Tx Counter64, sispm1040582lrtPortQoSQ5Rx Counter64, sispm1040582lrtPortQoSQ5Tx Counter64, sispm1040582lrtPortQoSQ6Rx Counter64, sispm1040582lrtPortQoSQ6Tx Counter64, sispm1040582lrtPortQoSQ7Rx Counter64, sispm1040582lrtPortQoSQ7Tx Counter64 } sispm1040582lrtPortQoSStatisticsPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 1 } sispm1040582lrtPortQoSQ0Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 2 } sispm1040582lrtPortQoSQ0Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 3 } sispm1040582lrtPortQoSQ1Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 4 } sispm1040582lrtPortQoSQ1Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 5 } sispm1040582lrtPortQoSQ2Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 6 } sispm1040582lrtPortQoSQ2Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 7 } sispm1040582lrtPortQoSQ3Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 8 } sispm1040582lrtPortQoSQ3Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 9 } sispm1040582lrtPortQoSQ4Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 10 } sispm1040582lrtPortQoSQ4Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 11 } sispm1040582lrtPortQoSQ5Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 12 } sispm1040582lrtPortQoSQ5Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 13 } sispm1040582lrtPortQoSQ6Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 14 } sispm1040582lrtPortQoSQ6Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 15 } sispm1040582lrtPortQoSQ7Rx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 16 } sispm1040582lrtPortQoSQ7Tx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortQoSStatisticsEntry 17 } sispm1040582lrtSFPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPort 4 } sispm1040582lrtSFPInfoEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSFPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtSFPInfoIndex } ::= { sispm1040582lrtSFPInfoTable 1 } SISPM1040582LRTSFPInfoEntry ::= SEQUENCE { sispm1040582lrtSFPInfoIndex Integer32, sispm1040582lrtSFPInfoPort DisplayString, sispm1040582lrtSFPConnectorType DisplayString, sispm1040582lrtSFPFiberType DisplayString, sispm1040582lrtSFPTxCentralWavelength DisplayString, sispm1040582lrtSFPBaudRate DisplayString, sispm1040582lrtSFPVendorOUI DisplayString, sispm1040582lrtSFPVendorName DisplayString, sispm1040582lrtSFPVendorPN DisplayString, sispm1040582lrtSFPVendorRev DisplayString, sispm1040582lrtSFPVendorSN DisplayString, sispm1040582lrtSFPDateCode DisplayString, sispm1040582lrtSFPTemperature DisplayString, sispm1040582lrtSFPVcc DisplayString, sispm1040582lrtSFPMon1Bias DisplayString, sispm1040582lrtSFPMon2TxPWR DisplayString, sispm1040582lrtSFPMon3RxPWR DisplayString } sispm1040582lrtSFPInfoIndex OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 1 } sispm1040582lrtSFPInfoPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 2 } sispm1040582lrtSFPConnectorType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 3 } sispm1040582lrtSFPFiberType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 4 } sispm1040582lrtSFPTxCentralWavelength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 5 } sispm1040582lrtSFPBaudRate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 6 } sispm1040582lrtSFPVendorOUI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 7 } sispm1040582lrtSFPVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 8 } sispm1040582lrtSFPVendorPN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 9 } sispm1040582lrtSFPVendorRev OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 10 } sispm1040582lrtSFPVendorSN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 11 } sispm1040582lrtSFPDateCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtSFPInfoEntry 12 } sispm1040582lrtSFPTemperature OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Celsius" ::= { sispm1040582lrtSFPInfoEntry 13 } sispm1040582lrtSFPVcc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of V" ::= { sispm1040582lrtSFPInfoEntry 14 } sispm1040582lrtSFPMon1Bias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of mA" ::= { sispm1040582lrtSFPInfoEntry 15 } sispm1040582lrtSFPMon2TxPWR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of dBm" ::= { sispm1040582lrtSFPInfoEntry 16 } sispm1040582lrtSFPMon3RxPWR OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of dBm" ::= { sispm1040582lrtSFPInfoEntry 17 } sispm1040582lrtVoiceVLAN OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 2 } sispm1040582lrtVoiceVLANConf OBJECT IDENTIFIER ::= { sispm1040582lrtVoiceVLAN 1 } sispm1040582lrtVoiceVLANMode OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN mode operation. default: 0, 0: disable 1: enable" ::= { sispm1040582lrtVoiceVLANConf 1 } sispm1040582lrtVoiceVLANVLANId OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION "Voice VLAN ID. default: 1000, range : 1-4094. " ::= { sispm1040582lrtVoiceVLANConf 2 } sispm1040582lrtVoiceVLANAgingTime OBJECT-TYPE SYNTAX Integer32 (10..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN secure learning aging time. default: 86400, range : 10 - 10000000. " ::= { sispm1040582lrtVoiceVLANConf 3 } sispm1040582lrtVoiceVLANTrafficClass OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN traffic class, all traffic on the Voice VLAN will apply this class, available value is from 0(Low) to 7(High). default: 7. " ::= { sispm1040582lrtVoiceVLANConf 4 } sispm1040582lrtVoiceVLANPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVoiceVLANPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Voice Vlan configuration. " ::= { sispm1040582lrtVoiceVLANConf 5 } sispm1040582lrtVoiceVLANPortEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVoiceVLANPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtVoiceVLANPort } ::= { sispm1040582lrtVoiceVLANPortTable 1 } SISPM1040582LRTVoiceVLANPortEntry ::= SEQUENCE { sispm1040582lrtVoiceVLANPort Integer32, sispm1040582lrtVoiceVLANPortMode Integer32, sispm1040582lrtVoiceVLANPortSecurity Integer32, sispm1040582lrtVoiceVLANPortDiscoveryProtocol Integer32 } sispm1040582lrtVoiceVLANPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtVoiceVLANPortEntry 1 } sispm1040582lrtVoiceVLANPortMode OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: Auto (Enable auto detect mode. It detects whether there is VoIP phone attached to the specific port and configures the Voice VLAN members automatically.) 2: Forced (Force join to Voice VLAN.)" ::= { sispm1040582lrtVoiceVLANPortEntry 2 } sispm1040582lrtVoiceVLANPortSecurity OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port security mode. default: 0, 0: Disable (Disjoin from Voice VLAN.) 1: enable ( Enable Voice VLAN security mode. When the function is enabled, all non-telephone MAC address in Voice VLAN will be blocked 10 seconds.)" ::= { sispm1040582lrtVoiceVLANPortEntry 3 } sispm1040582lrtVoiceVLANPortDiscoveryProtocol OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION " Voice VLAN port discovery protocol. default: 0 0: OUI (Detect telephony device by OUI address.) 1: LLDP (Detect telephony device by LLDP.) 2: Both (Both OUI and LLDP.) " ::= { sispm1040582lrtVoiceVLANPortEntry 4 } sispm1040582lrtVoiceVLANOUI OBJECT IDENTIFIER ::= { sispm1040582lrtVoiceVLAN 2 } sispm1040582lrtVoiceVLANOUICreate OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0 : None (read only) 1 : Create an OUI entry" ::= { sispm1040582lrtVoiceVLANOUI 1 } sispm1040582lrtVoiceVLANOUITable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVoiceVLANOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Create Voice VLAN OUI entry. Modify OUI table will restart auto detect OUI process. " ::= { sispm1040582lrtVoiceVLANOUI 2 } sispm1040582lrtVoiceVLANOUIEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVoiceVLANOUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtVoiceVLANOUIIndex } ::= { sispm1040582lrtVoiceVLANOUITable 1 } SISPM1040582LRTVoiceVLANOUIEntry ::= SEQUENCE { sispm1040582lrtVoiceVLANOUIIndex Integer32, sispm1040582lrtVoiceVLANTelephonyOUI DisplayString, sispm1040582lrtVoiceVLANDescription DisplayString, sispm1040582lrtVoiceVLANOUIRowStatus Integer32 } sispm1040582lrtVoiceVLANOUIIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtVoiceVLANOUIEntry 1 } sispm1040582lrtVoiceVLANTelephonyOUI OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "OUI address, format : 0a 1b 2c " ::= { sispm1040582lrtVoiceVLANOUIEntry 2 } sispm1040582lrtVoiceVLANDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 32 characters describing OUI address. " ::= { sispm1040582lrtVoiceVLANOUIEntry 3 } sispm1040582lrtVoiceVLANOUIRowStatus OBJECT-TYPE SYNTAX Integer32 (1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "1: active 2: notInservice 4: destroy 5: undo" ::= { sispm1040582lrtVoiceVLANOUIEntry 4 } --sispm1040582lrtGARP OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 3 } --sispm1040582lrtGARPConfTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTGARPConfEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtGARP 1 } --sispm1040582lrtGARPConfEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTGARPConfEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- INDEX { sispm1040582lrtGARPConfPort } -- ::= { sispm1040582lrtGARPConfTable 1 } --SISPM1040582LRTGARPConfEntry ::= SEQUENCE { -- sispm1040582lrtGARPConfPort Integer32, -- sispm1040582lrtGARPJoinTimer Integer32, -- sispm1040582lrtGARPLeaveTimer Integer32, -- sispm1040582lrtGARPLeaveAllTimer Integer32, -- sispm1040582lrtGARPApplicantion Integer32, -- sispm1040582lrtGARPAttributeType Integer32, -- sispm1040582lrtGARPApplicant Integer32 --} --sispm1040582lrtGARPConfPort OBJECT-TYPE -- SYNTAX Integer32 (1..4095) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtGARPConfEntry 1 } --sispm1040582lrtGARPJoinTimer OBJECT-TYPE -- SYNTAX Integer32 (200..1000) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 200, range : 200 - 1000 " -- ::= { sispm1040582lrtGARPConfEntry 2 } --sispm1040582lrtGARPLeaveTimer OBJECT-TYPE -- SYNTAX Integer32 (600..3000) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 600 , range : 600 - 3000" -- ::= { sispm1040582lrtGARPConfEntry 3 } --sispm1040582lrtGARPLeaveAllTimer OBJECT-TYPE -- SYNTAX Integer32 (10000..50000) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 10000, range : 10000 - 50000 " -- ::= { sispm1040582lrtGARPConfEntry 4 } --sispm1040582lrtGARPApplicantion OBJECT-TYPE -- SYNTAX Integer32(1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 1 -- 1: GVRP" -- ::= { sispm1040582lrtGARPConfEntry 5 } --sispm1040582lrtGARPAttributeType OBJECT-TYPE -- SYNTAX Integer32(1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 1 -- 1: VLAN" -- ::= { sispm1040582lrtGARPConfEntry 6 } --sispm1040582lrtGARPApplicant OBJECT-TYPE -- SYNTAX Integer32(0|1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 0 -- 0: normal-participant -- 1: non-participant" -- ::= { sispm1040582lrtGARPConfEntry 7 } --sispm1040582lrtGARPStatisticsTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTGARPStatisticsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " Show the basic GARP port statistics. " -- ::= { sispm1040582lrtGARP 2 } --sispm1040582lrtGARPStatisticsEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTGARPStatisticsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- INDEX { sispm1040582lrtGARPStatisticsPort } -- ::= { sispm1040582lrtGARPStatisticsTable 1 } --SISPM1040582LRTGARPStatisticsEntry ::= SEQUENCE { -- sispm1040582lrtGARPStatisticsPort Integer32, -- sispm1040582lrtGARPStatisticsPeerMAC DisplayString, -- sispm1040582lrtGARPStatisticsFailedCount Counter32 --} --sispm1040582lrtGARPStatisticsPort OBJECT-TYPE -- SYNTAX Integer32 (1..4095) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " port, range : 1 - port number. " -- ::= { sispm1040582lrtGARPStatisticsEntry 1 } --sispm1040582lrtGARPStatisticsPeerMAC OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " Peer MAC is MAC address of the neighbour Switch from with GARP frame is received. " -- ::= { sispm1040582lrtGARPStatisticsEntry 2 } --sispm1040582lrtGARPStatisticsFailedCount OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " explain Failed count here. " -- ::= { sispm1040582lrtGARPStatisticsEntry 3 } sispm1040582lrtGVRP OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 4 } sispm1040582lrtGVRPConf OBJECT IDENTIFIER ::= { sispm1040582lrtGVRP 1 } sispm1040582lrtGVRPMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0, 0: disable, 1: enable. " ::= { sispm1040582lrtGVRPConf 1 } sispm1040582lrtGVRPMaxVlan OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of simultaniously VLANs that GVRP can control. " ::= { sispm1040582lrtGVRPConf 2 } sispm1040582lrtGVRPJoinTime OBJECT-TYPE SYNTAX Integer32(1..20) MAX-ACCESS read-write STATUS current DESCRIPTION "join-time in units of centi seconds. Range is 1-20. Default is 20. " ::= { sispm1040582lrtGVRPConf 3 } sispm1040582lrtGVRPLeaveTime OBJECT-TYPE SYNTAX Integer32(60..300) MAX-ACCESS read-write STATUS current DESCRIPTION "leave-time in units of centi seconds. Range is 60-300. Default is 60. " ::= { sispm1040582lrtGVRPConf 4 } sispm1040582lrtGVRPLeaveAllTime OBJECT-TYPE SYNTAX Integer32(1000..5000) MAX-ACCESS read-write STATUS current DESCRIPTION "leave-all-time in units of centi seconds Range is 1000-5000. Default is 1000" ::= { sispm1040582lrtGVRPConf 5 } sispm1040582lrtGVRPConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTGVRPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtGVRPConf 6 } sispm1040582lrtGVRPConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTGVRPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtGVRPConfPort } ::= { sispm1040582lrtGVRPConfTable 1 } SISPM1040582LRTGVRPConfEntry ::= SEQUENCE { sispm1040582lrtGVRPConfPort Integer32, sispm1040582lrtGVRPConfPortMode Integer32 -- sispm1040582lrtGVRPConfPortRRole Integer32 } sispm1040582lrtGVRPConfPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtGVRPConfEntry 1 } sispm1040582lrtGVRPConfPortMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 1: enable 0: disable" ::= { sispm1040582lrtGVRPConfEntry 2 } --sispm1040582lrtGVRPConfPortRRole OBJECT-TYPE -- SYNTAX Integer32(0|1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 0 -- 1: enable -- 0: disable" -- ::= { sispm1040582lrtGVRPConfEntry 3 } --sispm1040582lrtGVRPStatisticsTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTGVRPStatisticsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtGVRP 2 } --sispm1040582lrtGVRPStatisticsEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTGVRPStatisticsEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- INDEX { sispm1040582lrtGVRPStatisticsPort } -- ::= { sispm1040582lrtGVRPStatisticsTable 1 } --SISPM1040582LRTGVRPStatisticsEntry ::= SEQUENCE { -- sispm1040582lrtGVRPStatisticsPort Integer32, -- sispm1040582lrtGVRPStatisticsJoinTxCnt Counter32, -- sispm1040582lrtGVRPStatisticsLeaveTxCnt Counter32 --} --sispm1040582lrtGVRPStatisticsPort OBJECT-TYPE -- SYNTAX Integer32 (1..4095) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtGVRPStatisticsEntry 1 } --sispm1040582lrtGVRPStatisticsJoinTxCnt OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtGVRPStatisticsEntry 2 } --sispm1040582lrtGVRPStatisticsLeaveTxCnt OBJECT-TYPE -- SYNTAX Counter32 -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtGVRPStatisticsEntry 3 } sispm1040582lrtMirroring OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 6 } --sispm1040582lrtPortToMirrorOn OBJECT-TYPE -- SYNTAX Integer32(0..10) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 0 -- 0: disable, -- range : 1 - port number. " -- ::= { sispm1040582lrtMirroring 2 } -- --sispm1040582lrtMirrorTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTMirrorEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtMirroring 3 } -- --sispm1040582lrtMirrorEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTMirrorEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- INDEX { sispm1040582lrtMirrorPort } -- ::= { sispm1040582lrtMirrorTable 1 } -- --SISPM1040582LRTMirrorEntry ::= SEQUENCE { -- sispm1040582lrtMirrorPort Integer32, -- sispm1040582lrtMirrorMode Integer32 --} -- --sispm1040582lrtMirrorPort OBJECT-TYPE -- SYNTAX Integer32 (1..4095) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " " -- ::= { sispm1040582lrtMirrorEntry 1 } -- --sispm1040582lrtMirrorMode OBJECT-TYPE -- SYNTAX Integer32(0..3) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 0 -- 0: disable -- 1: enable -- 2: rx only -- 3: tx only -- Setting Tx mirroring for analyzer port has no effect. Tx mirroring ignored" -- ::= { sispm1040582lrtMirrorEntry 2 } sispm1040582lrtRMirrorMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable, 1: enable" ::= { sispm1040582lrtMirroring 4 } sispm1040582lrtRMirrorType OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "0: Mirror 1: Source(RMirror) 2: Intermediate(RMirror) 3: Destination(RMirror)" ::= { sispm1040582lrtMirroring 5 } sispm1040582lrtRMirrorVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN ID" ::= { sispm1040582lrtMirroring 6 } sispm1040582lrtRMirrorReflectorPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Reflector Port range: 1 - port number." ::= { sispm1040582lrtMirroring 7 } sispm1040582lrtRMirrorSourceVLANs OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN-based Mirroring." ::= { sispm1040582lrtMirroring 8 } sispm1040582lrtRMirrorCPUSource OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "0: Disable 1: RX Only 2: TX Only 3: Both" ::= { sispm1040582lrtMirroring 9 } sispm1040582lrtRMirrorTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTRMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtMirroring 12 } sispm1040582lrtRMirrorEntry OBJECT-TYPE SYNTAX SISPM1040582LRTRMirrorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtRMirrorPort } ::= { sispm1040582lrtRMirrorTable 1 } SISPM1040582LRTRMirrorEntry ::= SEQUENCE { sispm1040582lrtRMirrorPort Integer32, sispm1040582lrtRMirrorPortSource Integer32, sispm1040582lrtRMirrorPortIntermediate Integer32, sispm1040582lrtRMirrorPortDestination Integer32 } sispm1040582lrtRMirrorPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtRMirrorEntry 1 } sispm1040582lrtRMirrorPortSource OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "0: Disable 1: RX Only 2: TX Only 3: Both" ::= { sispm1040582lrtRMirrorEntry 2 } sispm1040582lrtRMirrorPortIntermediate OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0: disable, 1: enable" ::= { sispm1040582lrtRMirrorEntry 3 } sispm1040582lrtRMirrorPortDestination OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0: disable, 1: enable" ::= { sispm1040582lrtRMirrorEntry 4 } sispm1040582lrtTrapEventSeverity OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 7 } sispm1040582lrtTrapEventSeverityTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTTrapEventSeverityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtTrapEventSeverity 1 } sispm1040582lrtTrapEventSeverityEntry OBJECT-TYPE SYNTAX SISPM1040582LRTTrapEventSeverityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtTrapEventSeverityIndex } ::= { sispm1040582lrtTrapEventSeverityTable 1 } SISPM1040582LRTTrapEventSeverityEntry ::= SEQUENCE { sispm1040582lrtTrapEventSeverityIndex Integer32, sispm1040582lrtTrapEventSeverityGroupName DisplayString, sispm1040582lrtTrapEventSeverityLevel Integer32, sispm1040582lrtTrapEventSeveritySyslog Integer32, sispm1040582lrtTrapEventSeverityTrap Integer32, sispm1040582lrtTrapEventSeveritySMTP Integer32, sispm1040582lrtTrapEventSeveritySwitch2go Integer32 } sispm1040582lrtTrapEventSeverityIndex OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtTrapEventSeverityEntry 1 } sispm1040582lrtTrapEventSeverityGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Group Name" ::= { sispm1040582lrtTrapEventSeverityEntry 2 } sispm1040582lrtTrapEventSeverityLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "0:Emergency 1:Alert 2:Critical 3:Error 4:Warning 5:Notice 6:Information 7:Debug" ::= { sispm1040582lrtTrapEventSeverityEntry 3 } sispm1040582lrtTrapEventSeveritySyslog OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtTrapEventSeverityEntry 4 } sispm1040582lrtTrapEventSeverityTrap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtTrapEventSeverityEntry 5 } sispm1040582lrtTrapEventSeveritySMTP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtTrapEventSeverityEntry 6 } sispm1040582lrtTrapEventSeveritySwitch2go OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtTrapEventSeverityEntry 7 } -- ======================================================================================================================= sispm1040582lrtSMTP OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 8 } sispm1040582lrtSMTPMailServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing email server. " ::= { sispm1040582lrtSMTP 1 } sispm1040582lrtSMTPUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing user name. " ::= { sispm1040582lrtSMTP 2 } sispm1040582lrtSMTPPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing password. " ::= { sispm1040582lrtSMTP 3 } sispm1040582lrtSMTPSender OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing sender. " ::= { sispm1040582lrtSMTP 5 } sispm1040582lrtSMTPReturnPath OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing return path. " ::= { sispm1040582lrtSMTP 6 } sispm1040582lrtSMTPEmailAddress1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { sispm1040582lrtSMTP 7 } sispm1040582lrtSMTPEmailAddress2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { sispm1040582lrtSMTP 8 } sispm1040582lrtSMTPEmailAddress3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { sispm1040582lrtSMTP 9 } sispm1040582lrtSMTPEmailAddress4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { sispm1040582lrtSMTP 10 } sispm1040582lrtSMTPEmailAddress5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { sispm1040582lrtSMTP 11 } sispm1040582lrtSMTPEmailAddress6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Up to 47 characters describing mail address. " ::= { sispm1040582lrtSMTP 12 } -- ======================================================================================================================= sispm1040582lrtACLConf OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 9 } -- RowStatus Info: createAndGo, notReady not supported. -- ======================================================================================================================= -- Textual Conventions for the sispm1040582lrt Acl Mib -- ======================================================================================================================= -- sispm1040582lrtACL OBJECT IDENTIFIER ::= { sispm1040582lrtACLConf 1 } sispm1040582lrtACLACE OBJECT IDENTIFIER ::= { sispm1040582lrtACLConf 3 } -- -- ======================================================================================================================= -- Start sispm1040582lrtACLPortConf group -- ======================================================================================================================= --sispm1040582lrtACLPortConfTable sispm1040582lrtACLPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTACLPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL Port Conf Table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtACL 1 } sispm1040582lrtACLPortConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTACLPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL Port Conf Entry. " INDEX { ifIndex } ::= { sispm1040582lrtACLPortConfTable 1 } SISPM1040582LRTACLPortConfEntry ::= SEQUENCE { sispm1040582lrtACLPortConfPolicyID Integer32, sispm1040582lrtACLPortConfAction INTEGER, sispm1040582lrtACLPortConfRateLimiterID Integer32, sispm1040582lrtACLPortConfPortRedirect Integer32, sispm1040582lrtACLPortConfMirror AdminMode, sispm1040582lrtACLPortConfLogging AdminMode, sispm1040582lrtACLPortConfShutdown AdminMode, sispm1040582lrtACLPortConfState AdminMode, sispm1040582lrtACLPortConfCounter Counter32 } sispm1040582lrtACLPortConfPolicyID OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "The policy to apply to this port. default: 0, range : 0 - 63. " ::= { sispm1040582lrtACLPortConfEntry 2 } sispm1040582lrtACLPortConfAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Whether forwarding is permitted ('Permit') or denied ('Deny'). default: 1, 0: Deny, 1: Permit." ::= { sispm1040582lrtACLPortConfEntry 3 } sispm1040582lrtACLPortConfRateLimiterID OBJECT-TYPE SYNTAX Integer32 (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate limiter to apply on this port. 0: Disable, range : 0 - 16. " ::= { sispm1040582lrtACLPortConfEntry 4 } sispm1040582lrtACLPortConfPortRedirect OBJECT-TYPE SYNTAX Integer32 (0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Port frames are redirected on. 0: Disable, range : 0 - end port number. " ::= { sispm1040582lrtACLPortConfEntry 5 } sispm1040582lrtACLPortConfMirror OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "The mirror operation of this port." ::= { sispm1040582lrtACLPortConfEntry 6 } sispm1040582lrtACLPortConfLogging OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the logging operation of this port." ::= { sispm1040582lrtACLPortConfEntry 7 } sispm1040582lrtACLPortConfShutdown OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the port shut down operation of this port." DEFVAL { disable } ::= { sispm1040582lrtACLPortConfEntry 8 } sispm1040582lrtACLPortConfState OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the port state of this port." DEFVAL { enable } ::= { sispm1040582lrtACLPortConfEntry 9 } sispm1040582lrtACLPortConfCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of frames that match this ACE. " ::= { sispm1040582lrtACLPortConfEntry 10 } -- -- ======================================================================================================================= -- Start sispm1040582lrtACLRateLimiter group -- ======================================================================================================================= --sispm1040582lrtACLRateLimiterTable sispm1040582lrtACLRateLimiterTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTACLRateLimiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL Rate Limiter Table." ::= { sispm1040582lrtACL 2 } sispm1040582lrtACLRateLimiterEntry OBJECT-TYPE SYNTAX SISPM1040582LRTACLRateLimiterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL Rate Limiter Entry. " INDEX { sispm1040582lrtACLRateLimiterID } ::= { sispm1040582lrtACLRateLimiterTable 1 } SISPM1040582LRTACLRateLimiterEntry ::= SEQUENCE { sispm1040582lrtACLRateLimiterID Integer32, sispm1040582lrtACLRateLimiterRate Integer32, sispm1040582lrtACLRateLimiterUnit INTEGER } sispm1040582lrtACLRateLimiterID OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rate Limiter ID. range : 1-16 " ::= { sispm1040582lrtACLRateLimiterEntry 1 } sispm1040582lrtACLRateLimiterRate OBJECT-TYPE SYNTAX Integer32(0..3276700) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1, range : <0-3276700> pps,The valid rate is 0 - 99, 100, 200, 300, ..., 3276700 in pps. <0-10000> kbps,The valid rate is 0, 100, 200, 300,..., 1000000 in kbps." ::= { sispm1040582lrtACLRateLimiterEntry 2 } sispm1040582lrtACLRateLimiterUnit OBJECT-TYPE SYNTAX INTEGER { pps(0), kbps(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the rate unit. sispm1040582lrt(e){0: pps, 1: kbps.} sispm1040582lrt{0: pps}" ::= { sispm1040582lrtACLRateLimiterEntry 3 } -- -- ======================================================================================================================= -- Start sispm1040582lrtACLACE group -- ======================================================================================================================= --sispm1040582lrtACLACEClear sispm1040582lrtACLACEClear OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all ACE counters." ::= { sispm1040582lrtACLACE 1 } --sispm1040582lrtACLACETable sispm1040582lrtACLACETable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTACLACEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Create ACL ACE entry. " ::= { sispm1040582lrtACLACE 2 } sispm1040582lrtACLACEEntry OBJECT-TYPE SYNTAX SISPM1040582LRTACLACEEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACLACE Table." INDEX { sispm1040582lrtACLACEIndex } ::= { sispm1040582lrtACLACETable 1 } SISPM1040582LRTACLACEEntry ::= SEQUENCE { sispm1040582lrtACLACEIndex Integer32, sispm1040582lrtACLACEID Integer32, sispm1040582lrtACLACENextID Integer32, -- sispm1040582lrtACLACELoopUp AdminMode, sispm1040582lrtACLACEIngressPort DisplayString, sispm1040582lrtACLACEPortPolicyNumber Integer32, sispm1040582lrtACLACEPortPolicyBitmask Integer32, sispm1040582lrtACLACEFrameType INTEGER, sispm1040582lrtACLACEAction INTEGER, sispm1040582lrtACLACEFilterPort Integer32, sispm1040582lrtACLACEDenyPortRedirect DisplayString, sispm1040582lrtACLACERateLimiter Integer32, sispm1040582lrtACLACEMirror AdminMode, sispm1040582lrtACLACELogging AdminMode, sispm1040582lrtACLACEShutdown AdminMode, sispm1040582lrtACLACECounter Counter32, sispm1040582lrtACLACEVLAN8021QTagged INTEGER, sispm1040582lrtACLACEVLANVID Integer32, sispm1040582lrtACLACEVLANTagPriority DisplayString, sispm1040582lrtACLACESMAC DisplayString, sispm1040582lrtACLACEDMACType INTEGER, sispm1040582lrtACLACEDMAC DisplayString, sispm1040582lrtACLACEEtherType Integer32, sispm1040582lrtACLACEArpOpCode INTEGER, sispm1040582lrtACLACEArpFlagsRequestReply INTEGER, sispm1040582lrtACLACEArpFlagsArpSMac INTEGER, sispm1040582lrtACLACEArpFlagsRarpDmac INTEGER, sispm1040582lrtACLACEArpFlagsLength INTEGER, sispm1040582lrtACLACEArpFlagsIp INTEGER, sispm1040582lrtACLACEArpFlagsEthernet INTEGER, sispm1040582lrtACLACESIPType INTEGER, sispm1040582lrtACLACESIPIPAddress IpAddress, sispm1040582lrtACLACESIPIPMask IpAddress, sispm1040582lrtACLACEDIPType INTEGER, sispm1040582lrtACLACEDIPIPAddress IpAddress, sispm1040582lrtACLACEDIPIPMask IpAddress, sispm1040582lrtACLACEIPProtocol INTEGER, sispm1040582lrtACLACEIPProtocolValue Integer32, sispm1040582lrtACLACEIPFlagsTTL INTEGER, sispm1040582lrtACLACEIPFlagsFragment INTEGER, sispm1040582lrtACLACEIPFlagsOptions INTEGER, sispm1040582lrtACLACEICMPType Integer32, sispm1040582lrtACLACEICMPCode Integer32, sispm1040582lrtACLACESourcePort DisplayString, sispm1040582lrtACLACEDestPort DisplayString, sispm1040582lrtACLACETCPFlagsFin INTEGER, sispm1040582lrtACLACETCPFlagsSyn INTEGER, sispm1040582lrtACLACETCPFlagsRst INTEGER, sispm1040582lrtACLACETCPFlagsPsh INTEGER, sispm1040582lrtACLACETCPFlagsAck INTEGER, sispm1040582lrtACLACETCPFlagsUrg INTEGER, sispm1040582lrtACLACEIPv6SIPAddress DisplayString, sispm1040582lrtACLACEIPv6SIPBitmask DisplayString, sispm1040582lrtACLACEIPv6HopLimit INTEGER, sispm1040582lrtACLACERowStatus RowStatus } sispm1040582lrtACLACEIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index. " ::= { sispm1040582lrtACLACEEntry 1 } sispm1040582lrtACLACEID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-create STATUS current DESCRIPTION "If the ACE ID is specified and an entry with this ACE ID already exists, the ACE will be modified. Otherwise, a new ACE will be added. range : 1 - 256. " ::= { sispm1040582lrtACLACEEntry 2 } sispm1040582lrtACLACENextID OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "If the next ACE ID is non zero, the ACE will be placed before this ACE in the list. If the next ACE ID is zero, the ACE will be placed last in the list. range : 0 - 256. " ::= { sispm1040582lrtACLACEEntry 3 } -- sispm1040582lrtACLACELoopUp OBJECT-TYPE -- SYNTAX AdminMode -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Specify the second lookup operation of the ACE." -- ::= { sispm1040582lrtACLACEEntry 4 } sispm1040582lrtACLACEIngressPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ingress port of the ACE. Possible values are: 0: All,The ACE will match all ingress port. Port n: The ACE will match a specific ingress port." ::= { sispm1040582lrtACLACEEntry 5 } sispm1040582lrtACLACEPortPolicyNumber OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "policy value. range : 0 - 64. 64: Any. " ::= { sispm1040582lrtACLACEEntry 6 } sispm1040582lrtACLACEPortPolicyBitmask OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "When 'Specific' is selected for the policy filter, you can enter a specific policy bitmask. sispm1040582lrt{range : 0 - 63(0x3f), 64: no data.} sispm1040582lrt{range : 0 - 255(0xff), 256: no data.}" ::= { sispm1040582lrtACLACEEntry 7 } sispm1040582lrtACLACEFrameType OBJECT-TYPE SYNTAX INTEGER { any(0), etype(1), arp(2), ipv4(3), ipv6(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Select the frame type for this ACE. When change the type Related oid will set default. 0: any, 1: etype, 2: arp, 3: ipv4, 4: ipv6." ::= { sispm1040582lrtACLACEEntry 8 } sispm1040582lrtACLACEAction OBJECT-TYPE SYNTAX INTEGER { deny(0), permit(1), filter(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "sispm1040582lrt{0: Deny,1: Permit,2: Filter, range: 0-2.} sispm1040582lrt{0: Deny,1: Permit }" ::= { sispm1040582lrtACLACEEntry 9 } sispm1040582lrtACLACEFilterPort OBJECT-TYPE SYNTAX Integer32(-1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "When 'Action' is 'Filter' can set. 0: All, Port n: The ACE applies to this port number, where n is the number of the switch port. -1: no data. range: -1 - Port number." ::= { sispm1040582lrtACLACEEntry 10 } sispm1040582lrtACLACEDenyPortRedirect OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Frames that hit the ACE are redirected to the port number specified here.Disabled,indicates that the port redirect operation is disabled. When 'Action' is 'Deny' can set. 0: disabled, Port no: The ACE applies to this port number, where n is the number of the switch port." ::= { sispm1040582lrtACLACEEntry 11 } sispm1040582lrtACLACERateLimiter OBJECT-TYPE SYNTAX Integer32(0..16) MAX-ACCESS read-create STATUS current DESCRIPTION "default: 0, 0: Disable range : 0 - 16 " ::= { sispm1040582lrtACLACEEntry 12 } sispm1040582lrtACLACEMirror OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-create STATUS current DESCRIPTION "default: 0, 0: disable - Frames matching the ACE are not mirrored. 1: enable - Frames matching the ACE are mirrored." ::= { sispm1040582lrtACLACEEntry 13 } sispm1040582lrtACLACELogging OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-create STATUS current DESCRIPTION "default: 0, 0: disable - Frames matching the ACE are not logged. 1: enable - Frames matching the ACE are stored in the system log." ::= { sispm1040582lrtACLACEEntry 14 } sispm1040582lrtACLACEShutdown OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-create STATUS current DESCRIPTION "default: 0, 0: disable - Port shut down is disabled for the AC. 1: enable - If a frame matches the ACE, the ingress port will be disabled." ::= { sispm1040582lrtACLACEEntry 15 } sispm1040582lrtACLACECounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter indicates the number of times the ACE was hit by a frame. " ::= { sispm1040582lrtACLACEEntry 16 } sispm1040582lrtACLACEVLAN8021QTagged OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1), any(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify whether frames can hit the action according to the 802.1Q tagged. default: 2, 0: disable - Untagged frame only. 1: enable - Tagged frame only. 2: Any - Any value is allowed." ::= { sispm1040582lrtACLACEEntry 17 } sispm1040582lrtACLACEVLANVID OBJECT-TYPE SYNTAX Integer32(0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the VLAN ID filter for this ACE. The vid can't be set when 802.1Q Tagged is disabled. default: 0, 0: Any - No VLAN ID filter is specified. range : 0 - 4095 " ::= { sispm1040582lrtACLACEEntry 18 } sispm1040582lrtACLACEVLANTagPriority OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the tag priority for this ACE. The tag priority can't be set when 802.1Q Tagged is disabled. range: 0~7,0-1,2-3,4-5,6-7,0-3,4-7." ::= { sispm1040582lrtACLACEEntry 19 } sispm1040582lrtACLACESMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Configure source MAC address for this ACE. : A frame that hits this ACE matches this source MAC address value. xx-xx-xx-xx-xx-xx. Any: Don't care." ::= { sispm1040582lrtACLACEEntry 20 } sispm1040582lrtACLACEDMACType OBJECT-TYPE SYNTAX INTEGER { any(0), mc(1), bc(2), uc(3) , macAddress(4) , noData(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "DMAC Type. default: 0, 0: Any - Don't care. 1: Multicast - Frame must be multicast. 2: Broadcast - Frame must be broadcast. 3: Unicast - Frame must be unicast. 4: mac address. 5: no data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 21 } sispm1040582lrtACLACEDMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Configure destination MAC address for this ACE. : A frame that hits this ACE matches this destination MAC address value. xx-xx-xx-xx-xx-xx." ::= { sispm1040582lrtACLACEEntry 22 } sispm1040582lrtACLACEEtherType OBJECT-TYPE SYNTAX Integer32(-1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "0: Any - Any but excluding 0x0800(IPv4) 0x0806(ARP) and 0x86DD(IPv6). range : 0 or 1536(0x0600), 65535(0xffff). -1: No data. " ::= { sispm1040582lrtACLACEEntry 23 } sispm1040582lrtACLACEArpOpCode OBJECT-TYPE SYNTAX INTEGER { any(0), arp(1), rarp(2), other(3), noData(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure ARP opcode for this ACE. default: 0, 0: Any - Don't care. 1: arp. 2: rarp. 3: other. 4: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 24 } sispm1040582lrtACLACEArpFlagsRequestReply OBJECT-TYPE SYNTAX INTEGER { reply(0), request(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the available ARP/RARP opcode (OP) flag for this ACE. default: 2, 0: Frame must have ARP Reply or RARP Reply OP flag. 1: Frame must have ARP Request or RARP Request OP flag set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 25 } sispm1040582lrtACLACEArpFlagsArpSMac OBJECT-TYPE SYNTAX INTEGER { notEqualSMAC(0), equalSMAC(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify whether frames can hit the action according to their sender hardware address field (SHA) settings. default: 2, 0: ARP frames where SHA is not equal to the SMAC address. 1: ARP frames where SHA is equal to the SMAC address. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 26 } sispm1040582lrtACLACEArpFlagsRarpDmac OBJECT-TYPE SYNTAX INTEGER { notEqualDMAC(0), equalDMAC(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify whether frames can hit the action according to their target hardware address field (THA) settings. default: 2, 0: RARP frames where THA is not equal to the DMAC address. 1: RARP frames where THA is equal to the DMAC address. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 27 } sispm1040582lrtACLACEArpFlagsLength OBJECT-TYPE SYNTAX INTEGER { notEqualEthIpV4 (0), equalEthIpV4(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP hardware address length (HLN) and protocol address length (PLN) settings. default: 2, 0: ARP/RARP frames where the HLN is not equal to Ethernet(0x06) or the (PLN) is not equal to IPv4(0x04). 1: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is equal to IPv4(0x04). 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 28 } sispm1040582lrtACLACEArpFlagsIp OBJECT-TYPE SYNTAX INTEGER { notEqualEth(0), equalEth(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP hardware address space (HRD) settings. default: 2, 0: ARP/RARP frames where the HLD is not equal to Ethernet(1). 1: ARP/RARP frames where the HLD is equal to Ethernet(1). 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 29 } sispm1040582lrtACLACEArpFlagsEthernet OBJECT-TYPE SYNTAX INTEGER { notEqualIp(0), equalIp(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify whether frames can hit the action according to their ARP/RARP protocol address space (PRO) settings. default: 2, 0: ARP/RARP frames where the PRO is not equal to IP\n(0x800). 1: ARP/RARP frames where the PRO is equal to IP(0x800). 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 30 } sispm1040582lrtACLACESIPType OBJECT-TYPE SYNTAX INTEGER { any(0), ip(1), network(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure source IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: Network. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 31 } sispm1040582lrtACLACESIPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A frame that hits this ACE matches this source IP address value." ::= { sispm1040582lrtACLACEEntry 32 } sispm1040582lrtACLACESIPIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specific sender IP mask in dotted decimal notation." ::= { sispm1040582lrtACLACEEntry 33 } sispm1040582lrtACLACEDIPType OBJECT-TYPE SYNTAX INTEGER { any(0), ip(1), network(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure destination IP address for this ACE. default: 0, 0: Any - Don't care. 1: IP Address. 2: Network. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 34 } sispm1040582lrtACLACEDIPIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A frame that hits this ACE matches this destination IP address value." ::= { sispm1040582lrtACLACEEntry 35 } sispm1040582lrtACLACEDIPIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Specific sender IP mask in dotted decimal notation." ::= { sispm1040582lrtACLACEEntry 36 } sispm1040582lrtACLACEIPProtocol OBJECT-TYPE SYNTAX INTEGER{ any(0), icmp(1), udp(2), tcp(3), other(4), noData(5)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the IP protocol filter for this ACE. default: 0, 0: Any, 1: ICMP, 2: UDP, 3: TCP, 4: Other, 5: no data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 37 } sispm1040582lrtACLACEIPProtocolValue OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure IP protocol value for this ACE when IP Protocol is 'other'. default: 256, 256: No data. range : 0 - 256" ::= { sispm1040582lrtACLACEEntry 38 } sispm1040582lrtACLACEIPFlagsTTL OBJECT-TYPE SYNTAX INTEGER { nonZero(0), zero(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the Time-to-Live settings for this ACE. default: 0, 0: zero, 1: Non-Zero 2: Any,, 3: No data." DEFVAL { nonZero } ::= { sispm1040582lrtACLACEEntry 39 } sispm1040582lrtACLACEIPFlagsFragment OBJECT-TYPE SYNTAX INTEGER{yes(0), no(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the fragment offset settings for this ACE. default: 2, 0: No, 1: Yes, 2: Any, 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 40 } sispm1040582lrtACLACEIPFlagsOptions OBJECT-TYPE SYNTAX INTEGER{yes(0), no(1), any(2), noData(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the options flag setting for this ACE. default: 2, 0: No, 1: Yes, 2: Any, 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 41 } sispm1040582lrtACLACEICMPType OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure ICMP type for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257." ::= { sispm1040582lrtACLACEEntry 42 } sispm1040582lrtACLACEICMPCode OBJECT-TYPE SYNTAX Integer32(0..257) MAX-ACCESS read-create STATUS current DESCRIPTION "Configure ICMP code for this ACE. default: 256, 256: Any - Don't care. 257: No data. range : 0 - 257." ::= { sispm1040582lrtACLACEEntry 43 } sispm1040582lrtACLACESourcePort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Configure Source UDP/TCP port range for this ACE. default: any, specific: 0~65535, range : 0 - 65535." ::= { sispm1040582lrtACLACEEntry 44 } sispm1040582lrtACLACEDestPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Configure Destination UDP/TCP port range for this ACE. default: any, specific: 0~65535, range : 0 - 65535." ::= { sispm1040582lrtACLACEEntry 45 } sispm1040582lrtACLACETCPFlagsFin OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure TCP (FIN) flags for this ACE. default: 2, 0: TCP frames where the FIN field is unset. 1: TCP frames where the FIN field is set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 46 } sispm1040582lrtACLACETCPFlagsSyn OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure TCP (SYN) flags for this ACE. default: 2, 0: TCP frames where the SYN field is unset. 1: TCP frames where the SYN field is set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 47 } sispm1040582lrtACLACETCPFlagsRst OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure TCP (RST) flags for this ACE. default: 2, 0: TCP frames where the RST field is unset. 1: TCP frames where the RST field is set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 48 } sispm1040582lrtACLACETCPFlagsPsh OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure TCP (PSH) flags for this ACE. default: 2, 0: TCP frames where the PSH field is unset. 1: TCP frames where the PSH field is set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 49 } sispm1040582lrtACLACETCPFlagsAck OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure TCP (ACK) flags for this ACE. default: 2, 0: TCP frames where the ACK field is unset. 1: TCP frames where the ACK field is set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 50 } sispm1040582lrtACLACETCPFlagsUrg OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configure TCP (URG) flags for this ACE. default: 2, 0: TCP frames where the URG field is unset. 1: TCP frames where the URG field is set. 2: Any - Don't care. 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 51 } sispm1040582lrtACLACEIPv6SIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When 'Specific' is selected for the source IPv6 filter, you can enter a specific SIPv6 address. The field only supported last 32 bits for IPv6 address. " ::= { sispm1040582lrtACLACEEntry 52 } sispm1040582lrtACLACEIPv6SIPBitmask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When 'Specific' is selected for the source IPv6 filter, you can enter a specific SIPv6 mask. The field only supported last 32 bits for IPv6 address. " ::= { sispm1040582lrtACLACEEntry 53 } sispm1040582lrtACLACEIPv6HopLimit OBJECT-TYPE SYNTAX INTEGER { unset(0), set(1), any(2), noData(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Specify the hop limit settings for this ACE. default: 2, 0: Where the Hop Limit field is unset. 1: Where the Hop Limit field is set. 2: Any - Don't care, 3: No data." DEFVAL { any } ::= { sispm1040582lrtACLACEEntry 54 } sispm1040582lrtACLACERowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtACLACEEntry 56 } -- -- ======================================================================================================================= -- Start sispm1040582lrtACLStatus group -- ======================================================================================================================= --sispm1040582lrtACLStatusTable sispm1040582lrtACLStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTACLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " ACL ACE Status entry. " ::= { sispm1040582lrtACL 4 } sispm1040582lrtACLStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTACLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL Status Entry." INDEX { sispm1040582lrtACLStatusIndex } ::= { sispm1040582lrtACLStatusTable 1 } SISPM1040582LRTACLStatusEntry ::= SEQUENCE { sispm1040582lrtACLStatusIndex Integer32, sispm1040582lrtACLStatusUser DisplayString, sispm1040582lrtACLStatusID Integer32, sispm1040582lrtACLStatusIngressPort DisplayString, sispm1040582lrtACLStatusFrameType DisplayString, sispm1040582lrtACLStatusAction DisplayString, sispm1040582lrtACLStatusRateLimiter DisplayString, sispm1040582lrtACLStatusPortRedirect DisplayString, sispm1040582lrtACLStatusMirror DisplayString, sispm1040582lrtACLStatusCPU DisplayString, -- sispm1040582lrtACLStatusCPUOnce DisplayString, sispm1040582lrtACLStatusCounter Counter32, sispm1040582lrtACLStatusConflict DisplayString } sispm1040582lrtACLStatusIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACL status index. " ::= { sispm1040582lrtACLStatusEntry 1 } sispm1040582lrtACLStatusUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ACL user. S : Static, IPMG : IP Management, IPSG : IP Source Guard, IPMC : IPMC, ARPI : Arp Inspection, UPnP : UPnP, DHCP : DHCP. " ::= { sispm1040582lrtACLStatusEntry 2 } sispm1040582lrtACLStatusID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "ACE ID. range : 1 - 256. " ::= { sispm1040582lrtACLStatusEntry 3 } sispm1040582lrtACLStatusIngressPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ingress port of the ACE. Possible values are: All: The ACE will match all ingress port. Port: The ACE will match a specific ingress port. " ::= { sispm1040582lrtACLStatusEntry 4 } sispm1040582lrtACLStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the frame type of the ACE. Any: The ACE will match any frame type. EType: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get matched by IP and ARP frames. ARP: The ACE will match ARP/RARP frames. IPv4: The ACE will match all IPv4 frames. IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol. IPv4/UDP: The ACE will match IPv4 frames with UDP protocol. IPv4/TCP: The ACE will match IPv4 frames with TCP protocol. IPv4/Other: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP. IPv6: The ACE will match all IPv6 standard frames. " ::= { sispm1040582lrtACLStatusEntry 5 } sispm1040582lrtACLStatusAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the forwarding action of the ACE. " ::= { sispm1040582lrtACLStatusEntry 6 } sispm1040582lrtACLStatusRateLimiter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the rate limiter number of the ACE. " ::= { sispm1040582lrtACLStatusEntry 7 } sispm1040582lrtACLStatusPortRedirect OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. " ::= { sispm1040582lrtACLStatusEntry 8 } sispm1040582lrtACLStatusMirror OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Specify the mirror operation of this port. Not support 'sispm1040582lrt'." ::= { sispm1040582lrtACLStatusEntry 9 } sispm1040582lrtACLStatusCPU OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Forward packet that matched the specific ACE to CPU. " ::= { sispm1040582lrtACLStatusEntry 10 } -- sispm1040582lrtACLStatusCPUOnce OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Forward first packet that matched the specific ACE to CPU. " -- ::= { sispm1040582lrtACLStatusEntry 11 } sispm1040582lrtACLStatusCounter OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter indicates the number of times the ACE was hit by a frame. " ::= { sispm1040582lrtACLStatusEntry 12 } sispm1040582lrtACLStatusConflict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. " ::= { sispm1040582lrtACLStatusEntry 13 } -- ======================================================================================================================= -- sispm1040582lrtAclConformance -- ======================================================================================================================= sispm1040582lrtAclConformance OBJECT IDENTIFIER ::= { sispm1040582lrtACL 200 } sispm1040582lrtAclCompliances OBJECT IDENTIFIER ::= { sispm1040582lrtAclConformance 1 } sispm1040582lrtAclGroups OBJECT IDENTIFIER ::= { sispm1040582lrtAclConformance 2 } sispm1040582lrtACLPortConfGroup OBJECT-GROUP OBJECTS { -- sispm1040582lrtACLPortConfTable sispm1040582lrtACLPortConfPolicyID, sispm1040582lrtACLPortConfAction, sispm1040582lrtACLPortConfRateLimiterID, sispm1040582lrtACLPortConfPortRedirect, -- sispm1040582lrtACLPortConfMirror, sispm1040582lrtACLPortConfLogging, sispm1040582lrtACLPortConfShutdown, sispm1040582lrtACLPortConfState, sispm1040582lrtACLPortConfCounter } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt ACL information." ::= { sispm1040582lrtAclGroups 1 } sispm1040582lrtACLRateLimiterGroup OBJECT-GROUP OBJECTS { -- sispm1040582lrtACLRateLimiterTable sispm1040582lrtACLRateLimiterRate -- sispm1040582lrtACLRateLimiterUnit } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt ACL information." ::= { sispm1040582lrtAclGroups 2 } sispm1040582lrtACLACEGroup OBJECT-GROUP OBJECTS { -- sispm1040582lrtACLACEClear sispm1040582lrtACLACEClear, -- sispm1040582lrtACLACETable sispm1040582lrtACLACEID, sispm1040582lrtACLACENextID, -- sispm1040582lrtACLACELoopUp, sispm1040582lrtACLACEIngressPort, sispm1040582lrtACLACEPortPolicyNumber, sispm1040582lrtACLACEPortPolicyBitmask, sispm1040582lrtACLACEFrameType, sispm1040582lrtACLACEAction, -- sispm1040582lrtACLACEFilterPort, sispm1040582lrtACLACEDenyPortRedirect, sispm1040582lrtACLACERateLimiter, -- sispm1040582lrtACLACEMirror, sispm1040582lrtACLACELogging, sispm1040582lrtACLACEShutdown, sispm1040582lrtACLACECounter, -- sispm1040582lrtACLACEVLAN8021QTagged, sispm1040582lrtACLACEVLANVID, sispm1040582lrtACLACEVLANTagPriority, sispm1040582lrtACLACESMAC, sispm1040582lrtACLACEDMACType, sispm1040582lrtACLACEDMAC, sispm1040582lrtACLACEEtherType, sispm1040582lrtACLACEArpOpCode, sispm1040582lrtACLACEArpFlagsRequestReply, sispm1040582lrtACLACEArpFlagsArpSMac, sispm1040582lrtACLACEArpFlagsRarpDmac, sispm1040582lrtACLACEArpFlagsLength, sispm1040582lrtACLACEArpFlagsIp, sispm1040582lrtACLACEArpFlagsEthernet, sispm1040582lrtACLACESIPType, sispm1040582lrtACLACESIPIPAddress, sispm1040582lrtACLACESIPIPMask, sispm1040582lrtACLACEDIPType, sispm1040582lrtACLACEDIPIPAddress, sispm1040582lrtACLACEDIPIPMask, sispm1040582lrtACLACEIPProtocol, sispm1040582lrtACLACEIPProtocolValue, sispm1040582lrtACLACEIPFlagsTTL, sispm1040582lrtACLACEIPFlagsFragment, sispm1040582lrtACLACEIPFlagsOptions, sispm1040582lrtACLACEICMPType, sispm1040582lrtACLACEICMPCode, sispm1040582lrtACLACESourcePort, sispm1040582lrtACLACEDestPort, sispm1040582lrtACLACETCPFlagsFin, sispm1040582lrtACLACETCPFlagsSyn, sispm1040582lrtACLACETCPFlagsRst, sispm1040582lrtACLACETCPFlagsPsh, sispm1040582lrtACLACETCPFlagsAck, sispm1040582lrtACLACETCPFlagsUrg, sispm1040582lrtACLACEIPv6SIPAddress, sispm1040582lrtACLACEIPv6SIPBitmask, sispm1040582lrtACLACEIPv6HopLimit, sispm1040582lrtACLACERowStatus } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt ACL information." ::= { sispm1040582lrtAclGroups 3 } sispm1040582lrtACLStatusGroup OBJECT-GROUP OBJECTS { -- sispm1040582lrtACLStatusTable sispm1040582lrtACLStatusUser, sispm1040582lrtACLStatusID, sispm1040582lrtACLStatusIngressPort, sispm1040582lrtACLStatusFrameType, sispm1040582lrtACLStatusAction, sispm1040582lrtACLStatusRateLimiter, sispm1040582lrtACLStatusPortRedirect, sispm1040582lrtACLStatusMirror, sispm1040582lrtACLStatusCPU, -- sispm1040582lrtACLStatusCPUOnce, sispm1040582lrtACLStatusCounter, sispm1040582lrtACLStatusConflict } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt ACL information." ::= { sispm1040582lrtAclGroups 4 } -- ======================================================================================================================= -- ======================================================================================================================= -- RowStatus Info: createAndGo, notReady not supported. -- ======================================================================================================================= -- Textual Conventions for the sispm1040582lrt Qos Mib -- ======================================================================================================================= -- sispm1040582lrtQosConf OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 10 } sispm1040582lrtQos OBJECT IDENTIFIER ::= { sispm1040582lrtQosConf 1 } sispm1040582lrtQosPortClassification OBJECT IDENTIFIER ::= { sispm1040582lrtQos 1 } sispm1040582lrtQosPortPolicing OBJECT IDENTIFIER ::= { sispm1040582lrtQos 2 } sispm1040582lrtQosQueuePolicing OBJECT IDENTIFIER ::= { sispm1040582lrtQos 3 } sispm1040582lrtQosPortScheduler OBJECT IDENTIFIER ::= { sispm1040582lrtQos 4 } sispm1040582lrtQosPortEgressTagRemarking OBJECT IDENTIFIER ::= { sispm1040582lrtQos 6 } sispm1040582lrtQosPortDSCP OBJECT IDENTIFIER ::= { sispm1040582lrtQos 7 } sispm1040582lrtQosDSCP OBJECT IDENTIFIER ::= { sispm1040582lrtQos 8 } sispm1040582lrtQosDSCPTranslation OBJECT IDENTIFIER ::= { sispm1040582lrtQos 9 } sispm1040582lrtQosDSCPClassification OBJECT IDENTIFIER ::= { sispm1040582lrtQos 10 } sispm1040582lrtQosControlList OBJECT IDENTIFIER ::= { sispm1040582lrtQos 11 } sispm1040582lrtQosStormControl OBJECT IDENTIFIER ::= { sispm1040582lrtQos 12 } -- sispm1040582lrtQosPortStormControl OBJECT IDENTIFIER ::= { sispm1040582lrtQos 13 } -- sispm1040582lrtQosWRED OBJECT IDENTIFIER ::= { sispm1040582lrtQos 14 } sispm1040582lrtQosQCLStatus OBJECT IDENTIFIER ::= { sispm1040582lrtQos 15 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosPortClassification group -- ======================================================================================================================= --sispm1040582lrtQosPortClassificationTable sispm1040582lrtQosPortClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Ingress Port Classification. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortClassification 1 } sispm1040582lrtQosPortClassificationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Port Classification Table." INDEX { ifIndex } ::= { sispm1040582lrtQosPortClassificationTable 1 } SISPM1040582LRTQosPortClassificationEntry ::= SEQUENCE { sispm1040582lrtQosPortClassificationQoSClass Integer32, sispm1040582lrtQosPortClassificationDPlevel Integer32, sispm1040582lrtQosPortClassificationPCP Integer32, sispm1040582lrtQosPortClassificationDEI Integer32, sispm1040582lrtQosPortClassificationTagClass AdminMode, sispm1040582lrtQosPortClassificationDSCPBased AdminMode, sispm1040582lrtQosPortClassificationQCLAddr INTEGER, sispm1040582lrtQosPortClassificationKeyType KeyType, sispm1040582lrtQosPortClassificationWredGroup Integer32 } sispm1040582lrtQosPortClassificationQoSClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the default QoS class, i.e., the QoS class for frames not classified in any way. There is a one to one mapping between QoS class, queue and priority. A QoS class of 0 (zero) has the lowest priority. NOTe: If the QoS class has been dynamically changed, then the actual QoS class is shown in parentheses after the configured QoS class. range: 0~7, default: 0." ::= { sispm1040582lrtQosPortClassificationEntry 2 } sispm1040582lrtQosPortClassificationDPlevel OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "DP level for frames not classified in any way. range: 0~1, default: 0." ::= { sispm1040582lrtQosPortClassificationEntry 3 } sispm1040582lrtQosPortClassificationPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Priority Code Point. It is a 3-bit field storing the priority level for the 802.1Q frame. range: 0~7, default: 0. Not support JAGUAR." ::= { sispm1040582lrtQosPortClassificationEntry 4 } sispm1040582lrtQosPortClassificationDEI OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Eligible Indicator. It is a 1-bit field in the VLAN. range 0~1, default: 0. Not support JAGUAR." ::= { sispm1040582lrtQosPortClassificationEntry 5 } sispm1040582lrtQosPortClassificationTagClass OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the classification mode for tagged frames. Not support SMB and JAGUAR." DEFVAL { disable } ::= { sispm1040582lrtQosPortClassificationEntry 6 } sispm1040582lrtQosPortClassificationDSCPBased OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Click to Enable DSCP Based QoS Ingress Port Classification." DEFVAL { disable } ::= { sispm1040582lrtQosPortClassificationEntry 7 } sispm1040582lrtQosPortClassificationQCLAddr OBJECT-TYPE SYNTAX INTEGER { sMacSip(0), dMacDip (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the QCL address matching mode. 0: SMAC/SIP, 1: DMAC/DIP, default: SMAC/SIP. Only support SPARX_III." DEFVAL { sMacSip } ::= { sispm1040582lrtQosPortClassificationEntry 8 } sispm1040582lrtQosPortClassificationKeyType OBJECT-TYPE SYNTAX KeyType MAX-ACCESS read-write STATUS current DESCRIPTION "The key type specifying the key generated for frames received on the port. 0: Normal, Half key, match outer tag, SIP/DIP and SMAC/DMAC. 1: Double Tag: Quarter key, match inner and outer tag. 2: IP Address: Half key, match inner and outer tag, SIP and DIP. For non-IP frames, match outer tag only. 3: MAC and IP Address: Full key, match inner and outer tag, SMAC, DMAC, SIP and DIP. Only support on SERVAL version." DEFVAL { normal } ::= { sispm1040582lrtQosPortClassificationEntry 9 } sispm1040582lrtQosPortClassificationWredGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the WRED group membership. Range:1-3." ::= { sispm1040582lrtQosPortClassificationEntry 10 } --sispm1040582lrtQoSIngressPortTagClassificationTable sispm1040582lrtQoSIngressPortTagClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQoSIngressPortTagClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show QoS Ingress Port Tag Classification. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortClassification 2 } sispm1040582lrtQoSIngressPortTagClassificationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQoSIngressPortTagClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QoS Ingress Port Tag Classification entry." INDEX { ifIndex, sispm1040582lrtQoSIngressPortTagPCP, sispm1040582lrtQoSIngressPortTagDEI } ::= { sispm1040582lrtQoSIngressPortTagClassificationTable 1 } SISPM1040582LRTQoSIngressPortTagClassificationEntry ::= SEQUENCE { sispm1040582lrtQoSIngressPortTagPCP INTEGER, sispm1040582lrtQoSIngressPortTagDEI INTEGER, sispm1040582lrtQoSIngressPortTagQosClass Integer32, sispm1040582lrtQoSIngressPortTagDPLevel Integer32 } sispm1040582lrtQoSIngressPortTagPCP OBJECT-TYPE SYNTAX INTEGER { pcp0(1), pcp1(2), pcp2(3), pcp3(4), pcp4(5), pcp5(6), pcp6(7), pcp7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "range: 1-8, PCP0:1, PCP1:2..." ::= { sispm1040582lrtQoSIngressPortTagClassificationEntry 2 } sispm1040582lrtQoSIngressPortTagDEI OBJECT-TYPE SYNTAX INTEGER { dei0(1), dei1(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Ingress Port Tag dei, DEI0:1, DEI1:2." ::= { sispm1040582lrtQoSIngressPortTagClassificationEntry 3 } sispm1040582lrtQoSIngressPortTagQosClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "range: 0-7." ::= { sispm1040582lrtQoSIngressPortTagClassificationEntry 4 } sispm1040582lrtQoSIngressPortTagDPLevel OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "range: 0-1." ::= { sispm1040582lrtQoSIngressPortTagClassificationEntry 5 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosPortPolicing group -- ======================================================================================================================= --sispm1040582lrtQosPortPolicingTable sispm1040582lrtQosPortPolicingTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Policer settings. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortPolicing 1 } sispm1040582lrtQosPortPolicingEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortPolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Policer setting entry." INDEX { ifIndex } ::= { sispm1040582lrtQosPortPolicingTable 1 } SISPM1040582LRTQosPortPolicingEntry ::= SEQUENCE { sispm1040582lrtQosPortPolicingEnabled AdminMode, sispm1040582lrtQosPortPolicingRate Integer32, sispm1040582lrtQosPortPolicingUnit Integer32, sispm1040582lrtQosPortPolicingFlowControl AdminMode } sispm1040582lrtQosPortPolicingEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosPortPolicingEntry 2 } sispm1040582lrtQosPortPolicingRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the rate for the policer. default: 500(kbps)." ::= { sispm1040582lrtQosPortPolicingEntry 3 } sispm1040582lrtQosPortPolicingUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the policer rate. 0: kbps 1: Mbps 2: fps 3: kfps " ::= { sispm1040582lrtQosPortPolicingEntry 4 } sispm1040582lrtQosPortPolicingFlowControl OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "If flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding frames." DEFVAL { disable } ::= { sispm1040582lrtQosPortPolicingEntry 5 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosQueuePolicing group -- ======================================================================================================================= --sispm1040582lrtQosQueuePolicingTable sispm1040582lrtQosQueuePolicingTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosQueuePolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Queue Policer settings. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosQueuePolicing 1 } sispm1040582lrtQosQueuePolicingEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosQueuePolicingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Queue Policing Entry." INDEX { ifIndex } ::= { sispm1040582lrtQosQueuePolicingTable 1 } SISPM1040582LRTQosQueuePolicingEntry ::= SEQUENCE { sispm1040582lrtQosQueuePolicingQueue0Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue0Rate Integer32, sispm1040582lrtQosQueuePolicingQueue0Unit Integer32, sispm1040582lrtQosQueuePolicingQueue1Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue1Rate Integer32, sispm1040582lrtQosQueuePolicingQueue1Unit Integer32, sispm1040582lrtQosQueuePolicingQueue2Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue2Rate Integer32, sispm1040582lrtQosQueuePolicingQueue2Unit Integer32, sispm1040582lrtQosQueuePolicingQueue3Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue3Rate Integer32, sispm1040582lrtQosQueuePolicingQueue3Unit Integer32, sispm1040582lrtQosQueuePolicingQueue4Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue4Rate Integer32, sispm1040582lrtQosQueuePolicingQueue4Unit Integer32, sispm1040582lrtQosQueuePolicingQueue5Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue5Rate Integer32, sispm1040582lrtQosQueuePolicingQueue5Unit Integer32, sispm1040582lrtQosQueuePolicingQueue6Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue6Rate Integer32, sispm1040582lrtQosQueuePolicingQueue6Unit Integer32, sispm1040582lrtQosQueuePolicingQueue7Enable AdminMode, sispm1040582lrtQosQueuePolicingQueue7Rate Integer32, sispm1040582lrtQosQueuePolicingQueue7Unit Integer32 } sispm1040582lrtQosQueuePolicingQueue0Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 0 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 3 } sispm1040582lrtQosQueuePolicingQueue0Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 0 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 4 } sispm1040582lrtQosQueuePolicingQueue0Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 5 } sispm1040582lrtQosQueuePolicingQueue1Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 1 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 6 } sispm1040582lrtQosQueuePolicingQueue1Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 1 policer is enabled on this switch port., default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 7 } sispm1040582lrtQosQueuePolicingQueue1Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 8 } sispm1040582lrtQosQueuePolicingQueue2Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 2 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 9 } sispm1040582lrtQosQueuePolicingQueue2Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 2 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 10 } sispm1040582lrtQosQueuePolicingQueue2Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 11 } sispm1040582lrtQosQueuePolicingQueue3Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 3 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 12 } sispm1040582lrtQosQueuePolicingQueue3Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 3 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 13 } sispm1040582lrtQosQueuePolicingQueue3Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 14 } sispm1040582lrtQosQueuePolicingQueue4Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 4 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 15 } sispm1040582lrtQosQueuePolicingQueue4Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 4 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 16 } sispm1040582lrtQosQueuePolicingQueue4Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 17 } sispm1040582lrtQosQueuePolicingQueue5Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 5 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 18 } sispm1040582lrtQosQueuePolicingQueue5Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 5 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 19 } sispm1040582lrtQosQueuePolicingQueue5Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 20 } sispm1040582lrtQosQueuePolicingQueue6Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 6 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 21 } sispm1040582lrtQosQueuePolicingQueue6Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 6 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 22 } sispm1040582lrtQosQueuePolicingQueue6Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 23 } sispm1040582lrtQosQueuePolicingQueue7Enable OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 7 policer is enabled on this switch port." DEFVAL { disable } ::= { sispm1040582lrtQosQueuePolicingEntry 24 } sispm1040582lrtQosQueuePolicingQueue7Rate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the queue 7 policer is enabled on this switch port. default: 500(Kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 25 } sispm1040582lrtQosQueuePolicingQueue7Unit OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the queue policer rate as kbps or Mbps. range: 0:kbs 1:Mbps default: 0(kbps)" ::= { sispm1040582lrtQosQueuePolicingEntry 26 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosPortScheduler group -- ======================================================================================================================= --sispm1040582lrtQosPortSchedulerModeTable sispm1040582lrtQosPortSchedulerModeTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortSchedulerModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS Port Scheduler Mode settings. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortScheduler 1 } sispm1040582lrtQosPortSchedulerModeEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortSchedulerModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Port Scheduler Mode entry." INDEX { ifIndex } ::= { sispm1040582lrtQosPortSchedulerModeTable 1 } SISPM1040582LRTQosPortSchedulerModeEntry ::= SEQUENCE { sispm1040582lrtQosSchedulerMode Integer32, sispm1040582lrtQosSchedulerShaper AdminMode, sispm1040582lrtQosSchedulerShaperRate Integer32 } sispm1040582lrtQosSchedulerMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the scheduler mode is Strict Priority or Weighted on this switch port. 0:Strict Priority, 2: 2 Queues Weighted 3: 3 Queues Weighted: only Jaguar2 support 4: 4 Queues Weighted: only Jaguar2 support 5: 5 Queues Weighted: only Jaguar2 support 6: 6 Queues Weighted 7: 7 Queues Weighted: only Jaguar2 support 8: 8 Queues Weighted: only Jaguar2 support" ::= { sispm1040582lrtQosPortSchedulerModeEntry 2 } sispm1040582lrtQosSchedulerShaper OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the port shaper is enabled." DEFVAL { disable } ::= { sispm1040582lrtQosPortSchedulerModeEntry 3 } sispm1040582lrtQosSchedulerShaperRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the rate for the port shaper. default: 500 kbps." ::= { sispm1040582lrtQosPortSchedulerModeEntry 4 } --sispm1040582lrtQosPortSchedulerTable sispm1040582lrtQosPortSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show Qos Port Scheduler. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortScheduler 2 } sispm1040582lrtQosPortSchedulerEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Port Scheduler Entry." INDEX { ifIndex, sispm1040582lrtQosSchedulerPortQueue} ::= { sispm1040582lrtQosPortSchedulerTable 1 } SISPM1040582LRTQosPortSchedulerEntry ::= SEQUENCE { sispm1040582lrtQosSchedulerPortQueue INTEGER, sispm1040582lrtQosSchedulerPortQueueShaper AdminMode, sispm1040582lrtQosSchedulerPortQueueShaperRate Integer32, sispm1040582lrtQosSchedulerPortQueueShaperExcess AdminMode, sispm1040582lrtQosSchedulerPortQueueSchedulerWeight Integer32, sispm1040582lrtQosSchedulerPortQueueSchedulerPercent DisplayString } sispm1040582lrtQosSchedulerPortQueue OBJECT-TYPE SYNTAX INTEGER { q0(1), q1(2), q2(3), q3(4), q4(5), q5(6), q6(7), q7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "range: 1-8. Q0: 1, Q1: 2, ..." ::= { sispm1040582lrtQosPortSchedulerEntry 2 } sispm1040582lrtQosSchedulerPortQueueShaper OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Qos scheduler admin state." DEFVAL { disable } ::= { sispm1040582lrtQosPortSchedulerEntry 3 } sispm1040582lrtQosSchedulerPortQueueShaperRate OBJECT-TYPE SYNTAX Integer32(100..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "range: 100..1000000 kbps. " ::= { sispm1040582lrtQosPortSchedulerEntry 4 } sispm1040582lrtQosSchedulerPortQueueShaperExcess OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "admin state sispm1040582lrtQosSchedulerPortQueueShaperExcess" DEFVAL { disable } ::= { sispm1040582lrtQosPortSchedulerEntry 5 } sispm1040582lrtQosSchedulerPortQueueSchedulerWeight OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "range: 1-100, default: 17. Only use in Q0 - Q5. Q6 & Q7 show 0" ::= { sispm1040582lrtQosPortSchedulerEntry 6 } sispm1040582lrtQosSchedulerPortQueueSchedulerPercent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Only use in Q0 - Q5. Q6 & Q7 show empty" ::= { sispm1040582lrtQosPortSchedulerEntry 7 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosPortEgressTagRemarking group -- ======================================================================================================================= --sispm1040582lrtQosPortEgressTagRemarkingTable sispm1040582lrtQosPortEgressTagRemarkingTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortEgressTagRemarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS Port Egress Tag Remark Configuration settings. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortEgressTagRemarking 1 } sispm1040582lrtQosPortEgressTagRemarkingEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortEgressTagRemarkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Port Egress Tag Remarking Entry." INDEX { ifIndex } ::= { sispm1040582lrtQosPortEgressTagRemarkingTable 1 } SISPM1040582LRTQosPortEgressTagRemarkingEntry ::= SEQUENCE { sispm1040582lrtQosEgressTagRemarkingMode INTEGER } sispm1040582lrtQosEgressTagRemarkingMode OBJECT-TYPE SYNTAX INTEGER { classified(0), default(1), mapped(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "the tag remarking mode for this port. 0:Classified, Use classified PCP/DEI values. 1:Default, Use default PCP/DEI values. 2:Mapped, Use mapped versions of QoS class and DP level." ::= { sispm1040582lrtQosPortEgressTagRemarkingEntry 2 } --sispm1040582lrtQosPortEgressTagRemarkingDefTable sispm1040582lrtQosPortEgressTagRemarkingDefTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortEgressTagRemarkingDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS Port Egress Tag Remark Configuration settings. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortEgressTagRemarking 2 } sispm1040582lrtQosPortEgressTagRemarkingDefEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortEgressTagRemarkingDefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The oQos Port Egress Tag Remarking Default Entry." INDEX { ifIndex } ::= { sispm1040582lrtQosPortEgressTagRemarkingDefTable 1 } SISPM1040582LRTQosPortEgressTagRemarkingDefEntry ::= SEQUENCE { sispm1040582lrtQosEgressTagRemarkingDefPCP Integer32, sispm1040582lrtQosEgressTagRemarkingDefDEI AdminMode } sispm1040582lrtQosEgressTagRemarkingDefPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the default PCP Range : 0-7" ::= { sispm1040582lrtQosPortEgressTagRemarkingDefEntry 2 } sispm1040582lrtQosEgressTagRemarkingDefDEI OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "controls the admin state of DEI" ::= { sispm1040582lrtQosPortEgressTagRemarkingDefEntry 3 } --sispm1040582lrtQosPortEgressTagRemarkingMapDPTable -- sispm1040582lrtQosPortEgressTagRemarkingMapDPTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTQosPortEgressTagRemarkingMapDPEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Show Qos Port Egress Tag Remarking Map DP. -- INDEX for this table is ifIndex which is -- equivalent to the panel port number." -- ::= { sispm1040582lrtQosPortEgressTagRemarking 3 } -- sispm1040582lrtQosPortEgressTagRemarkingMapDPEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTQosPortEgressTagRemarkingMapDPEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The Qos Port Egress Tag Remarking Map DP Entry." -- INDEX { ifIndex, -- sispm1040582lrtQosPortEgressTagRemarkingClassifiedDPLevel} -- ::= { sispm1040582lrtQosPortEgressTagRemarkingMapDPTable 1 } -- SISPM1040582LRTQosPortEgressTagRemarkingMapDPEntry ::= SEQUENCE { -- sispm1040582lrtQosPortEgressTagRemarkingClassifiedDPLevel Integer32, -- sispm1040582lrtQosPortEgressTagRemarkingDPLevel AdminMode -- } -- sispm1040582lrtQosPortEgressTagRemarkingClassifiedDPLevel OBJECT-TYPE -- SYNTAX Integer32(1..4) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "range: 1-4." -- ::= { sispm1040582lrtQosPortEgressTagRemarkingMapDPEntry 2 } -- sispm1040582lrtQosPortEgressTagRemarkingDPLevel OBJECT-TYPE -- SYNTAX AdminMode -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "admin state of Tag remark" -- ::= { sispm1040582lrtQosPortEgressTagRemarkingMapDPEntry 3 } --sispm1040582lrtQosPortEgressTagRemarkingMapTable sispm1040582lrtQosPortEgressTagRemarkingMapTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortEgressTagRemarkingMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Show Qos Port Egress Tag Remarking Map. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortEgressTagRemarking 4 } sispm1040582lrtQosPortEgressTagRemarkingMapEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortEgressTagRemarkingMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Port Egress Tag Remarking Map Entry." INDEX { ifIndex, sispm1040582lrtQosTagRemarkingQoSClass, sispm1040582lrtQosTagRemarkingDPLevel } ::= { sispm1040582lrtQosPortEgressTagRemarkingMapTable 1 } SISPM1040582LRTQosPortEgressTagRemarkingMapEntry ::= SEQUENCE { sispm1040582lrtQosTagRemarkingQoSClass INTEGER, sispm1040582lrtQosTagRemarkingDPLevel INTEGER, sispm1040582lrtQosTagRemarkingPCP Integer32, sispm1040582lrtQosTagRemarkingDEI Integer32 } sispm1040582lrtQosTagRemarkingQoSClass OBJECT-TYPE SYNTAX INTEGER { class0(1), class1(2), class2(3), class3(4), class4(5), class5(6), class6(7), class7(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "range: 1-8, QoS Class0: 1, QoS Class1: 2..." ::= { sispm1040582lrtQosPortEgressTagRemarkingMapEntry 2 } sispm1040582lrtQosTagRemarkingDPLevel OBJECT-TYPE SYNTAX INTEGER { level0(1), level1(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "range: 1-2, DP Level0: 1, DP Level1: 2." ::= { sispm1040582lrtQosPortEgressTagRemarkingMapEntry 3 } sispm1040582lrtQosTagRemarkingPCP OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "range: 0-7." ::= { sispm1040582lrtQosPortEgressTagRemarkingMapEntry 4 } sispm1040582lrtQosTagRemarkingDEI OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "range: 0-1." ::= { sispm1040582lrtQosPortEgressTagRemarkingMapEntry 5 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosPortDSCP group -- ======================================================================================================================= --sispm1040582lrtQosPortDSCPTable sispm1040582lrtQosPortDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosPortDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS Port DSCP Configuration settings. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtQosPortDSCP 1 } sispm1040582lrtQosPortDSCPEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosPortDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Port DSCP Entry." INDEX { ifIndex } ::= { sispm1040582lrtQosPortDSCPTable 1 } SISPM1040582LRTQosPortDSCPEntry ::= SEQUENCE { sispm1040582lrtQosPortDSCPIngressTranslate AdminMode, sispm1040582lrtQosPortDSCPIngressClassify INTEGER, sispm1040582lrtQosPortDSCPEgressRewrite INTEGER } sispm1040582lrtQosPortDSCPIngressTranslate OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Configure DSCP ingress translation mode." DEFVAL { disable } ::= { sispm1040582lrtQosPortDSCPEntry 2 } sispm1040582lrtQosPortDSCPIngressClassify OBJECT-TYPE SYNTAX INTEGER { disable (0), dscp (1), selected (2), all(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Classification for a port have 4 different values. 0: disable, 1: DSCP=0, 2: Selected, 3: All." DEFVAL { disable } ::= { sispm1040582lrtQosPortDSCPEntry 3 } sispm1040582lrtQosPortDSCPEgressRewrite OBJECT-TYPE SYNTAX INTEGER { disable (0),enable (1), remapDPUnaware (2), remapDPaware (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the port egress rewriting mode. LUTON26:{0: Disable,1: Enable,2: Remap DP Unaware, 3: Remap DP Aware,range: 0-3} Others:{0: Disable,1: Enable,2: Remap,range: 0-2}" ::= { sispm1040582lrtQosPortDSCPEntry 4 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosDSCP group -- ======================================================================================================================= sispm1040582lrtQosDSCPTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "configure the basic QoS DSCP based QoS Ingress Classification settings for all switches." ::= { sispm1040582lrtQosDSCP 1 } sispm1040582lrtQosDSCPEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosDSCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos DSCP Entry." INDEX { sispm1040582lrtQosDSCPList } ::= { sispm1040582lrtQosDSCPTable 1 } SISPM1040582LRTQosDSCPEntry ::= SEQUENCE { sispm1040582lrtQosDSCPList Integer32, sispm1040582lrtQosBasedDSCP DisplayString, sispm1040582lrtQosDSCPTrust AdminMode, sispm1040582lrtQosDSCPQosClass Integer32, sispm1040582lrtQosDSCPDPL Integer32 } sispm1040582lrtQosDSCPList OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSCP mapping table index(1-64)." ::= { sispm1040582lrtQosDSCPEntry 1 } sispm1040582lrtQosBasedDSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of supported DSCP values are 64." ::= { sispm1040582lrtQosDSCPEntry 2 } sispm1040582lrtQosDSCPTrust OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP values are mapped to a specific QoS class and Drop Precedence Level. Frames with untrusted DSCP values are treated as a non-IP frame." DEFVAL { disable } ::= { sispm1040582lrtQosDSCPEntry 3 } sispm1040582lrtQosDSCPQosClass OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "QoS class. range: 0-7, default: 0." ::= { sispm1040582lrtQosDSCPEntry 4 } sispm1040582lrtQosDSCPDPL OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Precedence Level. range: 0-1, default: 0." ::= { sispm1040582lrtQosDSCPEntry 5 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosDSCPTranslation group -- ======================================================================================================================= --sispm1040582lrtQosDSCPTranslationTable sispm1040582lrtQosDSCPTranslationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosDSCPTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS DSCP Translation settings for all switches." ::= { sispm1040582lrtQosDSCPTranslation 1 } sispm1040582lrtQosDSCPTranslationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosDSCPTranslationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos DSCP Translation Entry." INDEX { sispm1040582lrtQosDSCPTranslationList } ::= { sispm1040582lrtQosDSCPTranslationTable 1 } SISPM1040582LRTQosDSCPTranslationEntry ::= SEQUENCE { sispm1040582lrtQosDSCPTranslationList Integer32, sispm1040582lrtQosDSCPTranslationDSCPBasedId DisplayString, sispm1040582lrtQosDSCPTranslationIngressTranslate Integer32, sispm1040582lrtQosDSCPTranslationIngressClassify AdminMode, sispm1040582lrtQosDSCPTranslationEgressRemapDP0 Integer32, sispm1040582lrtQosDSCPTranslationEgressRemapDP1 Integer32 } sispm1040582lrtQosDSCPTranslationList OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSCP translation table index(1-64)." ::= { sispm1040582lrtQosDSCPTranslationEntry 1 } sispm1040582lrtQosDSCPTranslationDSCPBasedId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Configure global ingress DSCP translation table." ::= { sispm1040582lrtQosDSCPTranslationEntry 2 } sispm1040582lrtQosDSCPTranslationIngressTranslate OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "DSCP at Ingress side can be translated to any of DSCP values. range: 0-63, default: 0." ::= { sispm1040582lrtQosDSCPTranslationEntry 3 } sispm1040582lrtQosDSCPTranslationIngressClassify OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Configure DSCP ingress classification." DEFVAL { disable } ::= { sispm1040582lrtQosDSCPTranslationEntry 4 } sispm1040582lrtQosDSCPTranslationEgressRemapDP0 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0." ::= { sispm1040582lrtQosDSCPTranslationEntry 5 } sispm1040582lrtQosDSCPTranslationEgressRemapDP1 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the DSCP value from select menu to which you want to remap. range: 0-63, default: 0. Only support LUTON26." ::= { sispm1040582lrtQosDSCPTranslationEntry 6 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosDSCPClassification group -- ======================================================================================================================= --sispm1040582lrtQosDSCPClassificationTable sispm1040582lrtQosDSCPClassificationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosDSCPClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mapping of QoS class to DSCP value." ::= { sispm1040582lrtQosDSCPClassification 1 } sispm1040582lrtQosDSCPClassificationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosDSCPClassificationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos DSCP Classification Entry." INDEX { sispm1040582lrtQosDSCPClassificationQoSClass } ::= { sispm1040582lrtQosDSCPClassificationTable 1 } SISPM1040582LRTQosDSCPClassificationEntry ::= SEQUENCE { sispm1040582lrtQosDSCPClassificationQoSClass Integer32, sispm1040582lrtQosDSCPClassificationDSCPDP0 Integer32, sispm1040582lrtQosDSCPClassificationDSCPDP1 Integer32, sispm1040582lrtQosDSCPClassificationDSCPDP2 Integer32, sispm1040582lrtQosDSCPClassificationDSCPDP3 Integer32 } sispm1040582lrtQosDSCPClassificationQoSClass OBJECT-TYPE SYNTAX Integer32(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This page allows you to configure the mapping of QoS class and Drop Precedence Level to DSCP value. range: 1-8}" ::= { sispm1040582lrtQosDSCPClassificationEntry 1 } sispm1040582lrtQosDSCPClassificationDSCPDP0 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the classified DSCP value. range: 0-63, default: 0." ::= { sispm1040582lrtQosDSCPClassificationEntry 2 } sispm1040582lrtQosDSCPClassificationDSCPDP1 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the classified DSCP value. range: 0-63, default: 0." ::= { sispm1040582lrtQosDSCPClassificationEntry 3 } sispm1040582lrtQosDSCPClassificationDSCPDP2 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the classified DSCP value. range: 0-63, default: 0." ::= { sispm1040582lrtQosDSCPClassificationEntry 4 } sispm1040582lrtQosDSCPClassificationDSCPDP3 OBJECT-TYPE SYNTAX Integer32(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Select the classified DSCP value. range: 0-63, default: 0." ::= { sispm1040582lrtQosDSCPClassificationEntry 5 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosControlList group -- ======================================================================================================================= --sispm1040582lrtQosQceTable sispm1040582lrtQosQceTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosQceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Create Qos QCE entry." ::= { sispm1040582lrtQosControlList 1 } sispm1040582lrtQosQceEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosQceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Qos Qce Entry." INDEX { sispm1040582lrtQosQceIndex } ::= { sispm1040582lrtQosQceTable 1 } SISPM1040582LRTQosQceEntry ::= SEQUENCE { sispm1040582lrtQosQceIndex Integer32, sispm1040582lrtQosQceID Integer32, sispm1040582lrtQosQceList Integer32, sispm1040582lrtQosQcePortMembersSwitch Integer32, sispm1040582lrtQosQcePortMembers DisplayString, sispm1040582lrtQosQceTag DisplayString, sispm1040582lrtQosQceVID DisplayString, sispm1040582lrtQosPCP DisplayString, sispm1040582lrtQosDEI DisplayString, sispm1040582lrtQosSMAC DisplayString, sispm1040582lrtQosDMACType DisplayString, sispm1040582lrtQosDMACValue DisplayString, sispm1040582lrtQosQceInnerTag DisplayString, sispm1040582lrtQosQceInnerVID DisplayString, sispm1040582lrtQosInnerPCP DisplayString, sispm1040582lrtQosInnerDEI DisplayString, sispm1040582lrtQosFrameType INTEGER, sispm1040582lrtQosMacEtherType DisplayString, sispm1040582lrtQosLLCSSAPAddr DisplayString, sispm1040582lrtQosLLCDSAPAddr DisplayString, sispm1040582lrtQosLLCControl DisplayString, sispm1040582lrtQosSNAPPID DisplayString, sispm1040582lrtQosIpv4Protocol DisplayString, sispm1040582lrtQosIpv4ProtocolValue Integer32, sispm1040582lrtQosIpv4ProtocolUDPSPort DisplayString, sispm1040582lrtQosIpv4ProtocolUDPDPort DisplayString, sispm1040582lrtQosIpv4ProtocolTCPSPort DisplayString, sispm1040582lrtQosIpv4ProtocolTCPDPort DisplayString, sispm1040582lrtQosIpv4SourceIp DisplayString, sispm1040582lrtQosIpv4SourceMask DisplayString, sispm1040582lrtQosIpv4IPFragment INTEGER, sispm1040582lrtQosIpv4DSCP DisplayString, sispm1040582lrtQosIpv6Protocol DisplayString, sispm1040582lrtQosIpv6ProtocolValue Integer32, sispm1040582lrtQosIpv6ProtocolUDPSPort DisplayString, sispm1040582lrtQosIpv6ProtocolUDPDPort DisplayString, sispm1040582lrtQosIpv6ProtocolTCPSPort DisplayString, sispm1040582lrtQosIpv6ProtocolTCPDPort DisplayString, sispm1040582lrtQosIpv6SourceIp DisplayString, sispm1040582lrtQosIpv6SourceMask DisplayString, sispm1040582lrtQosIpv6DSCP DisplayString, sispm1040582lrtQosActionClass Integer32, sispm1040582lrtQosActionDPL Integer32, sispm1040582lrtQosActionDSCP Integer32, sispm1040582lrtQosActionPCP Integer32, sispm1040582lrtQosActionDEI Integer32, sispm1040582lrtQosActionPolicy Integer32, sispm1040582lrtQosQceRowStatus RowStatus } sispm1040582lrtQosQceIndex OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "the index to this table." ::= { sispm1040582lrtQosQceEntry 1 } sispm1040582lrtQosQceID OBJECT-TYPE SYNTAX Integer32(1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256." ::= { sispm1040582lrtQosQceEntry 2 } sispm1040582lrtQosQceList OBJECT-TYPE SYNTAX Integer32(0..256) MAX-ACCESS read-create STATUS current DESCRIPTION "If the QCE List is non zero, the QCE will be placed in the list. If the QCE List is zero, the QCE will be placed last in the list. range : 0 - 256." ::= { sispm1040582lrtQosQceEntry 3 } sispm1040582lrtQosQcePortMembersSwitch OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Switch number for port members. -1:Any. Only support stacking switch." ::= { sispm1040582lrtQosQceEntry 4 } sispm1040582lrtQosQcePortMembers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6." ::= { sispm1040582lrtQosQceEntry 5 } sispm1040582lrtQosQceTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "SERVAL:{'Any', 'Untag' or 'Tag' or 'cTag' or 'sTag'}. Others:{'Any', 'Untag' or 'Tag'}." ::= { sispm1040582lrtQosQceEntry 6 } sispm1040582lrtQosQceVID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid value of VLAN ID can be any value in 'Specific 1~4095' or 'range 1-4095' or 'Any'." ::= { sispm1040582lrtQosQceEntry 7 } sispm1040582lrtQosPCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'." ::= { sispm1040582lrtQosQceEntry 8 } sispm1040582lrtQosDEI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'." ::= { sispm1040582lrtQosQceEntry 9 } sispm1040582lrtQosSMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "JAGUAR:{Source MAC address: 24 MS bits OUI(00-00-00 ~ FF-FF-FF) or 'Any'.} Others:{Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'.}" ::= { sispm1040582lrtQosQceEntry 10 } sispm1040582lrtQosDMACType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast) or 'Any'. 'SP' only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 11 } sispm1040582lrtQosDMACValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "when sispm1040582lrtQosDMACType is 'SP'(specific) can set mac address. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 12 } sispm1040582lrtQosQceInnerTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Value of Inner Tag field can be 'Any', 'Untag' or 'Tag' or 'cTag' or 'sTag'. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 13 } sispm1040582lrtQosQceInnerVID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid value of Inner VLAN ID can be any value in 'Specific 1~4095' or 'range 1-4095' or 'Any'. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 14 } sispm1040582lrtQosInnerPCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid value Inner PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 15 } sispm1040582lrtQosInnerDEI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid value of Inner DEI can be any of values between 0, 1 or 'Any'. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 16 } sispm1040582lrtQosFrameType OBJECT-TYPE SYNTAX INTEGER { any(1), ethernet(2), llc(3), snap(4), ipv4(5), ipv6(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6." ::= { sispm1040582lrtQosQceEntry 17 } sispm1040582lrtQosMacEtherType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' , but excluding 0x800(IPv4) and 0x86DD(IPv6), range: 0000-FFFF, default: Any." ::= { sispm1040582lrtQosQceEntry 18 } sispm1040582lrtQosLLCSSAPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any." ::= { sispm1040582lrtQosQceEntry 19 } sispm1040582lrtQosLLCDSAPAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any." ::= { sispm1040582lrtQosQceEntry 20 } sispm1040582lrtQosLLCControl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any." ::= { sispm1040582lrtQosQceEntry 21 } sispm1040582lrtQosSNAPPID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any." ::= { sispm1040582lrtQosQceEntry 22 } sispm1040582lrtQosIpv4Protocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "IP protocol number: (Other, TCP or UDP) or 'Any'." ::= { sispm1040582lrtQosQceEntry 23 } sispm1040582lrtQosIpv4ProtocolValue OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Ipv4 Protocol is Other. range: 0-255 default: 0." ::= { sispm1040582lrtQosQceEntry 24 } sispm1040582lrtQosIpv4ProtocolUDPSPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Source TCP/UDP Port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 25 } sispm1040582lrtQosIpv4ProtocolUDPDPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 26 } sispm1040582lrtQosIpv4ProtocolTCPSPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 27 } sispm1040582lrtQosIpv4ProtocolTCPDPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 28 } sispm1040582lrtQosIpv4SourceIp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not is 127 or greater than 223." ::= { sispm1040582lrtQosQceEntry 29 } sispm1040582lrtQosIpv4SourceMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Specific Source IP address in mask format or value 0.0.0.0 is 'Any'." ::= { sispm1040582lrtQosQceEntry 30 } sispm1040582lrtQosIpv4IPFragment OBJECT-TYPE SYNTAX INTEGER { any(0), no(1), yes(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "IPv4 frame fragmented option: 2: yes, 1: no, 0: any." ::= { sispm1040582lrtQosQceEntry 31 } sispm1040582lrtQosIpv4DSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63." ::= { sispm1040582lrtQosQceEntry 32 } sispm1040582lrtQosIpv6Protocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "IP protocol number: (Other, TCP or UDP) or 'Any'." ::= { sispm1040582lrtQosQceEntry 33 } sispm1040582lrtQosIpv6ProtocolValue OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "when IPv6 protocol is Other , range: 0-255." ::= { sispm1040582lrtQosQceEntry 34 } sispm1040582lrtQosIpv6ProtocolUDPSPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 35 } sispm1040582lrtQosIpv6ProtocolUDPDPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 36 } sispm1040582lrtQosIpv6ProtocolTCPSPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 37 } sispm1040582lrtQosIpv6ProtocolTCPDPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP." ::= { sispm1040582lrtQosQceEntry 38 } sispm1040582lrtQosIpv6SourceIp OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits." ::= { sispm1040582lrtQosQceEntry 39 } sispm1040582lrtQosIpv6SourceMask OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits." ::= { sispm1040582lrtQosQceEntry 40 } sispm1040582lrtQosIpv6DSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43." ::= { sispm1040582lrtQosQceEntry 41 } sispm1040582lrtQosActionClass OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "QoS class: (0-7) or 8: Default." ::= { sispm1040582lrtQosQceEntry 42 } sispm1040582lrtQosActionDPL OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-create STATUS current DESCRIPTION "JAGUAR:{range:0-4. 4: Default} Others:{range:0-2. 2: Default}." ::= { sispm1040582lrtQosQceEntry 43 } sispm1040582lrtQosActionDSCP OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default." ::= { sispm1040582lrtQosQceEntry 44 } sispm1040582lrtQosActionPCP OBJECT-TYPE SYNTAX Integer32(0..8) MAX-ACCESS read-create STATUS current DESCRIPTION "pcp: (0-7) or 8: Default. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 45 } sispm1040582lrtQosActionDEI OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "dei: (0-1) or 2: Default. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 46 } sispm1040582lrtQosActionPolicy OBJECT-TYPE SYNTAX Integer32(0..64) MAX-ACCESS read-create STATUS current DESCRIPTION "ACL Policy number: (0-63) or 'empty' (64 field). Default: empty. Only support SERVAL version." ::= { sispm1040582lrtQosQceEntry 47 } sispm1040582lrtQosQceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtQosQceEntry 48 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosStormControl group -- ======================================================================================================================= --sispm1040582lrtQosStormControlTable sispm1040582lrtQosStormControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosStormControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS DSCP Translation settings for all switches." ::= { sispm1040582lrtQosStormControl 1 } sispm1040582lrtQosStormControlEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosStormControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos Storm Control Entry." INDEX { sispm1040582lrtQosStormControlFrameType } ::= { sispm1040582lrtQosStormControlTable 1 } SISPM1040582LRTQosStormControlEntry ::= SEQUENCE { sispm1040582lrtQosStormControlFrameType INTEGER, sispm1040582lrtQosStormControlEnabled AdminMode, sispm1040582lrtQosStormControlRate Integer32, sispm1040582lrtQosStormControlUnit Integer32 } sispm1040582lrtQosStormControlFrameType OBJECT-TYPE SYNTAX INTEGER { unicast(1), multicast (2), broadcast (3)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "The settings in a particular row apply to the frame type listed here. 1:Unicast, 2:Multicast, 3:Broadcast." ::= { sispm1040582lrtQosStormControlEntry 1 } sispm1040582lrtQosStormControlEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the global storm policer for the given frame type." ::= { sispm1040582lrtQosStormControlEntry 2 } sispm1040582lrtQosStormControlRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the rate for the global storm policer." ::= { sispm1040582lrtQosStormControlEntry 3 } sispm1040582lrtQosStormControlUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls the unit of measure for the global storm policer rate as fps or kfps. 0: kbps 1: Mbps 2: fps 3: kbps" ::= { sispm1040582lrtQosStormControlEntry 4 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosPortStormControl group -- ======================================================================================================================= --sispm1040582lrtQosPortStormControlTable -- sispm1040582lrtQosPortStormControlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTQosPortStormControlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "Configure the storm control settings. -- INDEX for this table is ifIndex which is -- equivalent to the panel port number." -- ::= { sispm1040582lrtQosPortStormControl 1 } -- -- sispm1040582lrtQosPortStormControlEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTQosPortStormControlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The Qos Port Storm Control Entry." -- INDEX { ifIndex } -- ::= { sispm1040582lrtQosPortStormControlTable 1 } -- -- SISPM1040582LRTQosPortStormControlEntry ::= SEQUENCE { -- sispm1040582lrtQosPortStormControlUnicastEnabled AdminMode, -- sispm1040582lrtQosPortStormControlUnicastRate Integer32, -- sispm1040582lrtQosPortStormControlUnicastUnit Integer32, -- sispm1040582lrtQosPortStormControlBroadcastEnabled AdminMode, -- sispm1040582lrtQosPortStormControlBroadcastRate Integer32, -- sispm1040582lrtQosPortStormControlBroadcastUnit Integer32, -- sispm1040582lrtQosPortStormControlUnknownEnabled AdminMode, -- sispm1040582lrtQosPortStormControlUnknownRate Integer32, -- sispm1040582lrtQosPortStormControlUnknownUnit Integer32 -- } -- -- sispm1040582lrtQosPortStormControlUnicastEnabled OBJECT-TYPE -- SYNTAX AdminMode -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls whether the storm control is enabled on this -- switch port." -- ::= { sispm1040582lrtQosPortStormControlEntry 2 } -- -- sispm1040582lrtQosPortStormControlUnicastRate OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the rate for the storm control." -- ::= { sispm1040582lrtQosPortStormControlEntry 3 } -- -- sispm1040582lrtQosPortStormControlUnicastUnit OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the unit of measure for the storm control rate. -- 0: kbps -- 1: Mbps -- 2: fps -- 3: kbps" -- ::= { sispm1040582lrtQosPortStormControlEntry 4 } -- -- sispm1040582lrtQosPortStormControlBroadcastEnabled OBJECT-TYPE -- SYNTAX AdminMode -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls whether the storm control is enabled on this -- switch port." -- ::= { sispm1040582lrtQosPortStormControlEntry 5 } -- -- sispm1040582lrtQosPortStormControlBroadcastRate OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the rate for the storm control." -- ::= { sispm1040582lrtQosPortStormControlEntry 6 } -- -- sispm1040582lrtQosPortStormControlBroadcastUnit OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the unit of measure for the storm control rate. -- 0: kbps -- 1: Mbps -- 2: fps -- 3: kbps" -- ::= { sispm1040582lrtQosPortStormControlEntry 7 } -- -- sispm1040582lrtQosPortStormControlUnknownEnabled OBJECT-TYPE -- SYNTAX AdminMode -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls whether the storm control is enabled on this -- switch port." -- ::= { sispm1040582lrtQosPortStormControlEntry 8 } -- -- sispm1040582lrtQosPortStormControlUnknownRate OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the rate for the storm control." -- ::= { sispm1040582lrtQosPortStormControlEntry 9 } -- -- sispm1040582lrtQosPortStormControlUnknownUnit OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the unit of measure for the storm control rate. -- 0: kbps -- 1: Mbps -- 2: fps -- 3: kbps" -- ::= { sispm1040582lrtQosPortStormControlEntry 10 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosWRED group -- ======================================================================================================================= --sispm1040582lrtQosWREDTable -- sispm1040582lrtQosWREDTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SISPM1040582LRTQosWREDEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The basic QoS DSCP Translation settings for all switches." -- ::= { sispm1040582lrtQosWRED 1 } -- -- sispm1040582lrtQosWREDEntry OBJECT-TYPE -- SYNTAX SISPM1040582LRTQosWREDEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The Qos WRED Entry." -- INDEX { sispm1040582lrtQosWREDQueue } -- ::= { sispm1040582lrtQosWREDTable 1 } -- -- SISPM1040582LRTQosWREDEntry ::= SEQUENCE { -- sispm1040582lrtQosWREDGroupIndex Integer32, -- sispm1040582lrtQosWREDQueue Integer32, -- sispm1040582lrtQosWREDDPL Integer32, -- sispm1040582lrtQosWREDEnable AdminMode, -- sispm1040582lrtQosWREDMinThreshold Integer32, -- sispm1040582lrtQosWREDMaxThreshold Integer32, -- sispm1040582lrtQosWREDMaxUnit INTEGER -- } -- -- sispm1040582lrtQosWREDGroupIndex OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The group number for which the configuration -- below applies." -- ::= { sispm1040582lrtQosWREDEntry 1 } -- -- sispm1040582lrtQosWREDQueue OBJECT-TYPE -- SYNTAX Integer32(1..65535) -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The queue number (QoS class) for which the configuration -- below applies." -- ::= { sispm1040582lrtQosWREDEntry 2 } -- -- sispm1040582lrtQosWREDDPL OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "The dpl number for which the configuration -- below applies." -- ::= { sispm1040582lrtQosWREDEntry 3 } -- -- -- sispm1040582lrtQosWREDEnable OBJECT-TYPE -- SYNTAX AdminMode -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls whether RED is enabled for this queue. -- " -- DEFVAL { disable } -- ::= { sispm1040582lrtQosWREDEntry 4 } -- -- sispm1040582lrtQosWREDMinThreshold OBJECT-TYPE -- SYNTAX Integer32(0..100) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the lower RED fill level threshold. If the queue filling -- level is below this threshold, the drop probability is zero. -- range:0-100%, -- default: 0. -- " -- ::= { sispm1040582lrtQosWREDEntry 5 } -- -- sispm1040582lrtQosWREDMaxThreshold OBJECT-TYPE -- SYNTAX Integer32(0..100) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls the upper RED drop probability or fill level threshold -- for frames marked with Drop Precedence Level 1 (yellow frames). -- range:0-100%, -- default: 50. -- " -- ::= { sispm1040582lrtQosWREDEntry 6 } -- -- sispm1040582lrtQosWREDMaxUnit OBJECT-TYPE -- SYNTAX INTEGER {dropProbability (0), fillLevel (1) } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Selects the unit for Max. -- 0: Drop Probability, -- 1: Fill Level, -- default: Drop Probability. -- " -- DEFVAL { dropProbability } -- ::= { sispm1040582lrtQosWREDEntry 7 } -- -- ======================================================================================================================= -- Start sispm1040582lrtQosQCLStatus -- ======================================================================================================================= --sispm1040582lrtQosQCLStatusTable sispm1040582lrtQosQCLStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTQosQCLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The basic QoS DSCP Translation settings for all switches." ::= { sispm1040582lrtQosQCLStatus 1 } sispm1040582lrtQosQCLStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTQosQCLStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Qos QCL Status Entry." INDEX { sispm1040582lrtQosQCLStatusList } ::= { sispm1040582lrtQosQCLStatusTable 1 } SISPM1040582LRTQosQCLStatusEntry ::= SEQUENCE { sispm1040582lrtQosQCLStatusList Integer32, sispm1040582lrtQosQCLStatusUser DisplayString, sispm1040582lrtQosQCLStatusQCEId DisplayString, sispm1040582lrtQosQCLStatusFrameType DisplayString, sispm1040582lrtQosQCLStatusPortlist DisplayString, sispm1040582lrtQosQCLStatusActionClass DisplayString, sispm1040582lrtQosQCLStatusActionDPL DisplayString, sispm1040582lrtQosQCLStatusActionDSCP DisplayString, sispm1040582lrtQosQCLStatusActionPCP DisplayString, sispm1040582lrtQosQCLStatusActionDEL DisplayString, sispm1040582lrtQosQCLStatusActionPolicy DisplayString, sispm1040582lrtQosQCLStatusConflict DisplayString, sispm1040582lrtQosQCLStatusSwitch Integer32, sispm1040582lrtQosQCLStatusDMAC DisplayString, sispm1040582lrtQosQCLStatusSMAC DisplayString, sispm1040582lrtQosQCLStatusTag DisplayString, sispm1040582lrtQosQCLStatusVID DisplayString, sispm1040582lrtQosQCLStatusPCP DisplayString, sispm1040582lrtQosQCLStatusDEI DisplayString } sispm1040582lrtQosQCLStatusList OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "QCL table index." ::= { sispm1040582lrtQosQCLStatusEntry 1} sispm1040582lrtQosQCLStatusUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the QCL user." ::= { sispm1040582lrtQosQCLStatusEntry 2 } sispm1040582lrtQosQCLStatusQCEId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the index of QCE." ::= { sispm1040582lrtQosQCLStatusEntry 3} sispm1040582lrtQosQCLStatusFrameType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the type of frame to look for incomming frames. Any: The QCE will match all frame type. Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed. LLC: Only (LLC) frames are allowed. SNAP: Only (SNAP) frames are allowed. IPv4: The QCE will match only IPV4 frames. IPv6: The QCE will match only IPV6 frames." ::= { sispm1040582lrtQosQCLStatusEntry 4} sispm1040582lrtQosQCLStatusPortlist OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the list of ports configured with the QCE." ::= { sispm1040582lrtQosQCLStatusEntry 5} sispm1040582lrtQosQCLStatusActionClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Classified QoS class; if a frame matches the QCE it will be put in the queue." ::= { sispm1040582lrtQosQCLStatusEntry 6} sispm1040582lrtQosQCLStatusActionDPL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Drop Precedence Level; if a frame matches the QCE then DP level will set to value displayed under DPL column." ::= { sispm1040582lrtQosQCLStatusEntry 7} sispm1040582lrtQosQCLStatusActionDSCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If a frame matches the QCE then DSCP will be classified with the value displayed under DSCP column." ::= { sispm1040582lrtQosQCLStatusEntry 8} sispm1040582lrtQosQCLStatusActionPCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Classify PCP value. Only support SERVAL." ::= { sispm1040582lrtQosQCLStatusEntry 9} sispm1040582lrtQosQCLStatusActionDEL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Classify DEI value. Only support SERVAL." ::= { sispm1040582lrtQosQCLStatusEntry 10} sispm1040582lrtQosQCLStatusActionPolicy OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Classify ACL Policy number. Only support SERVAL." ::= { sispm1040582lrtQosQCLStatusEntry 11} sispm1040582lrtQosQCLStatusConflict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays Conflict status of QCL entries." ::= { sispm1040582lrtQosQCLStatusEntry 12} sispm1040582lrtQosQCLStatusSwitch OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Switch number for port members. -1:Any. Only support stacking switch." ::= { sispm1040582lrtQosQCLStatusEntry 13} sispm1040582lrtQosQCLStatusDMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Destination MAC address: Possible values are 'Unicast', 'Multicast', 'Broadcast' or 'Any'." ::= { sispm1040582lrtQosQCLStatusEntry 14} sispm1040582lrtQosQCLStatusSMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'." ::= { sispm1040582lrtQosQCLStatusEntry 15} sispm1040582lrtQosQCLStatusTag OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Value of Tag field can be 'Untagged', 'Tagged', 'C-Tagged', 'S-Tagged' or 'Any'." ::= { sispm1040582lrtQosQCLStatusEntry 16} sispm1040582lrtQosQCLStatusVID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Valid value of VLAN ID can be any value in the range 1-4095 or 'Any'" ::= { sispm1040582lrtQosQCLStatusEntry 17} sispm1040582lrtQosQCLStatusPCP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6, 7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'." ::= { sispm1040582lrtQosQCLStatusEntry 18} sispm1040582lrtQosQCLStatusDEI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Valid value of DEI can be '0', '1' or 'Any'." ::= { sispm1040582lrtQosQCLStatusEntry 19} -- ======================================================================================================================= -- sispm1040582lrtQosConformance -- ======================================================================================================================= sispm1040582lrtQosConformance OBJECT IDENTIFIER ::= { sispm1040582lrtQosConf 200 } sispm1040582lrtQosCompliances OBJECT IDENTIFIER ::= { sispm1040582lrtQosConformance 1 } sispm1040582lrtQosGroups OBJECT IDENTIFIER ::= { sispm1040582lrtQosConformance 2 } sispm1040582lrtQosPortClassificationGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosPortClassificationTable sispm1040582lrtQosPortClassificationQoSClass, sispm1040582lrtQosPortClassificationDPlevel, sispm1040582lrtQosPortClassificationPCP, sispm1040582lrtQosPortClassificationDEI, sispm1040582lrtQosPortClassificationTagClass, sispm1040582lrtQosPortClassificationDSCPBased, sispm1040582lrtQosPortClassificationQCLAddr, sispm1040582lrtQosPortClassificationKeyType, --sispm1040582lrtQoSIngressPortTagClassificationTable sispm1040582lrtQoSIngressPortTagQosClass, sispm1040582lrtQoSIngressPortTagDPLevel } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 1} sispm1040582lrtQosPortPolicingGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosPortPolicingTable sispm1040582lrtQosPortPolicingEnabled, sispm1040582lrtQosPortPolicingRate, sispm1040582lrtQosPortPolicingUnit, sispm1040582lrtQosPortPolicingFlowControl } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 2} sispm1040582lrtQosQueuePolicingGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosPortPolicingTable sispm1040582lrtQosQueuePolicingQueue0Enable, sispm1040582lrtQosQueuePolicingQueue0Rate, sispm1040582lrtQosQueuePolicingQueue1Enable, sispm1040582lrtQosQueuePolicingQueue1Rate, sispm1040582lrtQosQueuePolicingQueue2Enable, sispm1040582lrtQosQueuePolicingQueue2Rate, sispm1040582lrtQosQueuePolicingQueue3Enable, sispm1040582lrtQosQueuePolicingQueue3Rate, sispm1040582lrtQosQueuePolicingQueue4Enable, sispm1040582lrtQosQueuePolicingQueue4Rate, sispm1040582lrtQosQueuePolicingQueue5Enable, sispm1040582lrtQosQueuePolicingQueue5Rate, sispm1040582lrtQosQueuePolicingQueue6Enable, sispm1040582lrtQosQueuePolicingQueue6Rate, sispm1040582lrtQosQueuePolicingQueue7Enable, sispm1040582lrtQosQueuePolicingQueue7Rate } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 3} sispm1040582lrtQosPortSchedulerGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosPortSchedulerModeTable sispm1040582lrtQosSchedulerMode, sispm1040582lrtQosSchedulerShaper, sispm1040582lrtQosSchedulerShaperRate, --sispm1040582lrtQosPortSchedulerTable sispm1040582lrtQosSchedulerPortQueueShaper, sispm1040582lrtQosSchedulerPortQueueShaperRate, sispm1040582lrtQosSchedulerPortQueueShaperExcess, sispm1040582lrtQosSchedulerPortQueueSchedulerWeight, sispm1040582lrtQosSchedulerPortQueueSchedulerPercent, --sispm1040582lrtQosPortEgressTagRemarkingMapTable sispm1040582lrtQosTagRemarkingPCP, sispm1040582lrtQosTagRemarkingDEI } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 4} sispm1040582lrtQosPortEgressTagRemarkingGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosPortEgressTagRemarkingTable sispm1040582lrtQosEgressTagRemarkingMode, --sispm1040582lrtQosPortEgressTagRemarkingDefTable sispm1040582lrtQosEgressTagRemarkingDefPCP, sispm1040582lrtQosEgressTagRemarkingDefDEI --sispm1040582lrtQosPortEgressTagRemarkingMapDPTable --sispm1040582lrtQosPortEgressTagRemarkingDPLevel } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 6} sispm1040582lrtQosPortDSCPGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosPortDSCPTable sispm1040582lrtQosPortDSCPIngressTranslate, sispm1040582lrtQosPortDSCPIngressClassify, sispm1040582lrtQosPortDSCPEgressRewrite } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 7} sispm1040582lrtQosDSCPGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosDSCPTable sispm1040582lrtQosBasedDSCP, sispm1040582lrtQosDSCPTrust, sispm1040582lrtQosDSCPQosClass, sispm1040582lrtQosDSCPDPL } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 8} sispm1040582lrtQosDSCPTranslationGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosDSCPTranslationTable sispm1040582lrtQosDSCPTranslationDSCPBasedId, sispm1040582lrtQosDSCPTranslationIngressTranslate, sispm1040582lrtQosDSCPTranslationIngressClassify, sispm1040582lrtQosDSCPTranslationEgressRemapDP0, sispm1040582lrtQosDSCPTranslationEgressRemapDP1 } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 9} --sispm1040582lrtQosDSCPClassificationGroup OBJECT-GROUP -- OBJECTS { -- sispm1040582lrtQosDSCPClassificationTable -- sispm1040582lrtQosDSCPClassificationDSCP -- } -- STATUS current -- DESCRIPTION -- "The collection of objects which are used to indicate -- sispm1040582lrt qos information." -- ::= { sispm1040582lrtQosGroups 10} sispm1040582lrtQosControlListGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosQceTable sispm1040582lrtQosQceID, sispm1040582lrtQosQceList, sispm1040582lrtQosQcePortMembers, sispm1040582lrtQosQceTag, sispm1040582lrtQosQceVID, sispm1040582lrtQosPCP, sispm1040582lrtQosDEI, sispm1040582lrtQosSMAC, sispm1040582lrtQosDMACType, sispm1040582lrtQosDMACValue, sispm1040582lrtQosQceInnerTag, sispm1040582lrtQosQceInnerVID, sispm1040582lrtQosInnerPCP, sispm1040582lrtQosInnerDEI, sispm1040582lrtQosFrameType, sispm1040582lrtQosMacEtherType, sispm1040582lrtQosLLCSSAPAddr, sispm1040582lrtQosLLCDSAPAddr, sispm1040582lrtQosLLCControl, sispm1040582lrtQosSNAPPID, sispm1040582lrtQosIpv4Protocol, sispm1040582lrtQosIpv4ProtocolValue, sispm1040582lrtQosIpv4ProtocolUDPSPort, sispm1040582lrtQosIpv4ProtocolUDPDPort, sispm1040582lrtQosIpv4ProtocolTCPSPort, sispm1040582lrtQosIpv4ProtocolTCPDPort, sispm1040582lrtQosIpv4SourceIp, sispm1040582lrtQosIpv4SourceMask, sispm1040582lrtQosIpv4IPFragment, sispm1040582lrtQosIpv4DSCP, sispm1040582lrtQosIpv6Protocol, sispm1040582lrtQosIpv6ProtocolValue, sispm1040582lrtQosIpv6ProtocolUDPSPort, sispm1040582lrtQosIpv6ProtocolUDPDPort, sispm1040582lrtQosIpv6ProtocolTCPSPort, sispm1040582lrtQosIpv6ProtocolTCPDPort, sispm1040582lrtQosIpv6SourceIp, sispm1040582lrtQosIpv6SourceMask, sispm1040582lrtQosIpv6DSCP, sispm1040582lrtQosActionClass, sispm1040582lrtQosActionDPL, sispm1040582lrtQosActionDSCP, sispm1040582lrtQosActionPCP, sispm1040582lrtQosActionDEI, sispm1040582lrtQosActionPolicy, sispm1040582lrtQosQceRowStatus } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 11} sispm1040582lrtQosStormControlGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosStormControlTable sispm1040582lrtQosStormControlEnabled, sispm1040582lrtQosStormControlRate } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 12} --sispm1040582lrtQosPortStormControlGroup OBJECT-GROUP -- OBJECTS { -- sispm1040582lrtQosPortStormControlTable -- sispm1040582lrtQosPortStormControlUnicastEnabled, -- sispm1040582lrtQosPortStormControlUnicastRate, -- sispm1040582lrtQosPortStormControlUnicastUnit, -- sispm1040582lrtQosPortStormControlBroadcastEnabled, -- sispm1040582lrtQosPortStormControlBroadcastRate, -- sispm1040582lrtQosPortStormControlBroadcastUnit, -- sispm1040582lrtQosPortStormControlUnknownEnabled, -- sispm1040582lrtQosPortStormControlUnknownRate, -- sispm1040582lrtQosPortStormControlUnknownUnit -- } -- STATUS current -- DESCRIPTION -- "The collection of objects which are used to indicate -- sispm1040582lrt qos information." -- ::= { sispm1040582lrtQosGroups 13} --sispm1040582lrtQosWREDGroup OBJECT-GROUP -- OBJECTS { -- sispm1040582lrtQosWREDTable -- sispm1040582lrtQosWREDEnable, -- sispm1040582lrtQosWREDMinThreshold, -- -- sispm1040582lrtQosWREDMaxThreshold, -- sispm1040582lrtQosWREDMaxUnit -- } -- STATUS current -- DESCRIPTION -- "The collection of objects which are used to indicate -- sispm1040582lrt qos information." -- ::= { sispm1040582lrtQosGroups 14} sispm1040582lrtQosQCLStatusGroup OBJECT-GROUP OBJECTS { --sispm1040582lrtQosQCLStatusTable sispm1040582lrtQosQCLStatusUser, sispm1040582lrtQosQCLStatusQCEId, sispm1040582lrtQosQCLStatusFrameType, sispm1040582lrtQosQCLStatusPortlist, sispm1040582lrtQosQCLStatusActionClass, sispm1040582lrtQosQCLStatusActionDPL, sispm1040582lrtQosQCLStatusActionDSCP, sispm1040582lrtQosQCLStatusActionPCP, sispm1040582lrtQosQCLStatusActionDEL, sispm1040582lrtQosQCLStatusActionPolicy, sispm1040582lrtQosQCLStatusConflict } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt qos information." ::= { sispm1040582lrtQosGroups 15} -- ======================================================================================================================= sispm1040582lrtLoopProtection OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 12 } sispm1040582lrtLoopProtectionConfig OBJECT IDENTIFIER ::= { sispm1040582lrtLoopProtection 1 } sispm1040582lrtLoopProtectionGlobalEnable OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection mode. 0: disable, 1: enable, default: disable. " ::= { sispm1040582lrtLoopProtectionConfig 1 } sispm1040582lrtLoopProtectionTranmisstionTime OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection transmit interval. default: 5, range: 1-10. " ::= { sispm1040582lrtLoopProtectionConfig 2 } sispm1040582lrtLoopProtectionShutdownTime OBJECT-TYPE SYNTAX Integer32(0..604800) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection shutdown time. default: 180, range: 0-604800. " ::= { sispm1040582lrtLoopProtectionConfig 3 } sispm1040582lrtLoopProtectionConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTLoopProtectionConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Loop Protection configurations. " ::= { sispm1040582lrtLoopProtectionConfig 4 } sispm1040582lrtLoopProtectionConfigurationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTLoopProtectionConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtLoopProtectionConfPort } ::= { sispm1040582lrtLoopProtectionConfigurationTable 1 } SISPM1040582LRTLoopProtectionConfigurationEntry ::= SEQUENCE { sispm1040582lrtLoopProtectionConfPort Integer32, sispm1040582lrtLoopProtectionConfEnable Integer32, sispm1040582lrtLoopProtectionConfAction Integer32, sispm1040582lrtLoopProtectionConfTxmode Integer32 } sispm1040582lrtLoopProtectionConfPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtLoopProtectionConfigurationEntry 1 } sispm1040582lrtLoopProtectionConfEnable OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection port mode. 0: disable, 1: enable, default: enable. " ::= { sispm1040582lrtLoopProtectionConfigurationEntry 2 } sispm1040582lrtLoopProtectionConfAction OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION " Configure loop protection port action. 0: Shutdown port, 1: Shutdown port and Log, 2: Log Only, default: Shutdown port. " ::= { sispm1040582lrtLoopProtectionConfigurationEntry 3 } sispm1040582lrtLoopProtectionConfTxmode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure loop protection port transmit mode. 0: disable, 1: enable, default: enable. " ::= { sispm1040582lrtLoopProtectionConfigurationEntry 4 } sispm1040582lrtLoopProtectionStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTLoopProtectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Loop Protection Status. " ::= { sispm1040582lrtLoopProtection 2 } sispm1040582lrtLoopProtectionStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTLoopProtectionStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtLoopProtectionStatusPort } ::= { sispm1040582lrtLoopProtectionStatusTable 1 } SISPM1040582LRTLoopProtectionStatusEntry ::= SEQUENCE { sispm1040582lrtLoopProtectionStatusPort Integer32, sispm1040582lrtLoopProtectionStatusAction DisplayString, sispm1040582lrtLoopProtectionStatusTransmit DisplayString, sispm1040582lrtLoopProtectionStatusLoops Integer32, sispm1040582lrtLoopProtectionStatusStatus DisplayString, sispm1040582lrtLoopProtectionStatusLoop DisplayString, sispm1040582lrtLoopProtectionStatusTimeLastLoop DisplayString } sispm1040582lrtLoopProtectionStatusPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtLoopProtectionStatusEntry 1 } sispm1040582lrtLoopProtectionStatusAction OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The currently configured port action. " ::= { sispm1040582lrtLoopProtectionStatusEntry 2 } sispm1040582lrtLoopProtectionStatusTransmit OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The currently configured port transmit mode. " ::= { sispm1040582lrtLoopProtectionStatusEntry 3 } sispm1040582lrtLoopProtectionStatusLoops OBJECT-TYPE SYNTAX Integer32 (0..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION " The number of loops detected on this port. " ::= { sispm1040582lrtLoopProtectionStatusEntry 4 } sispm1040582lrtLoopProtectionStatusStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The current loop protection status of the port. " ::= { sispm1040582lrtLoopProtectionStatusEntry 5 } sispm1040582lrtLoopProtectionStatusLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Whether a loop is currently detected on the port. " ::= { sispm1040582lrtLoopProtectionStatusEntry 6 } sispm1040582lrtLoopProtectionStatusTimeLastLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The time of the last loop event detected. " ::= { sispm1040582lrtLoopProtectionStatusEntry 7 } -- ======================================================================================================================= sispm1040582lrtPoe OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 13 } sispm1040582lrtPoeStatus OBJECT IDENTIFIER ::= { sispm1040582lrtPoe 1 } sispm1040582lrtPoeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Scheduling Table. " ::= { sispm1040582lrtPoeStatus 1 } sispm1040582lrtPoeStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeStatusLocalPort } ::= { sispm1040582lrtPoeStatusTable 1 } SISPM1040582LRTPoeStatusEntry ::= SEQUENCE { sispm1040582lrtPoeStatusLocalPort Integer32, sispm1040582lrtPoeStatusPDclass Integer32, sispm1040582lrtPoeStatusPowerRequested DisplayString, sispm1040582lrtPoeStatusPowerAllocated DisplayString, sispm1040582lrtPoeStatusPowerUsed DisplayString, sispm1040582lrtPoeStatusCurrentUsed DisplayString, sispm1040582lrtPoeStatusPriority DisplayString, sispm1040582lrtPoeStatusPortStatus DisplayString } sispm1040582lrtPoeStatusLocalPort OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local port Index." ::= { sispm1040582lrtPoeStatusEntry 1 } sispm1040582lrtPoeStatusPDclass OBJECT-TYPE SYNTAX Integer32 (0..4) MAX-ACCESS read-only STATUS current DESCRIPTION " Indicates the QCL user. 0: Max. power 15.4 W, 1: Max. power 4.0 W, 2: Max. power 7.0 W, 3: Max. power 15.4 W, 4: Max. power 60.0 W. " ::= { sispm1040582lrtPoeStatusEntry 2 } sispm1040582lrtPoeStatusPowerRequested OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Requested shows the requested amount of power the PD wants to be reserved. " ::= { sispm1040582lrtPoeStatusEntry 3} sispm1040582lrtPoeStatusPowerAllocated OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Allocated shows the amount of power the switch has allocated for the PD. " ::= { sispm1040582lrtPoeStatusEntry 4} sispm1040582lrtPoeStatusPowerUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Used shows how much power the PD currently is using. " ::= { sispm1040582lrtPoeStatusEntry 5} sispm1040582lrtPoeStatusCurrentUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Power Used shows how much current the PD currently is using. " ::= { sispm1040582lrtPoeStatusEntry 6} sispm1040582lrtPoeStatusPriority OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Priority shows the port's priority configured by the user. " ::= { sispm1040582lrtPoeStatusEntry 7} sispm1040582lrtPoeStatusPortStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The Port Status shows the port's status. " ::= { sispm1040582lrtPoeStatusEntry 8} sispm1040582lrtPoeStatusTotalTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeStatusTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Scheduling Total Table. " ::= { sispm1040582lrtPoeStatus 2 } sispm1040582lrtPoeStatusTotalEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeStatusTotalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeStatusSwitchIndex } ::= { sispm1040582lrtPoeStatusTotalTable 1 } SISPM1040582LRTPoeStatusTotalEntry ::= SEQUENCE { sispm1040582lrtPoeStatusSwitchIndex Integer32, sispm1040582lrtPoeStatusTotalPowerRequested DisplayString, sispm1040582lrtPoeStatusTotalPowerAllocated DisplayString, sispm1040582lrtPoeStatusTotalPowerUsed DisplayString, sispm1040582lrtPoeStatusTotalCurrentUsed DisplayString } sispm1040582lrtPoeStatusSwitchIndex OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch Index." ::= { sispm1040582lrtPoeStatusTotalEntry 1 } sispm1040582lrtPoeStatusTotalPowerRequested OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power Requested." ::= { sispm1040582lrtPoeStatusTotalEntry 2} sispm1040582lrtPoeStatusTotalPowerAllocated OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power allocated." ::= { sispm1040582lrtPoeStatusTotalEntry 3} sispm1040582lrtPoeStatusTotalPowerUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Power Used." ::= { sispm1040582lrtPoeStatusTotalEntry 4} sispm1040582lrtPoeStatusTotalCurrentUsed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Total Current Used." ::= { sispm1040582lrtPoeStatusTotalEntry 5} sispm1040582lrtPoePowerDelay OBJECT IDENTIFIER ::= { sispm1040582lrtPoe 2 } sispm1040582lrtPoePowerDelayTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoePowerDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Power Delay mode. " ::= { sispm1040582lrtPoePowerDelay 1 } sispm1040582lrtPoePowerDelayEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoePowerDelayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoePowerDelayPort } ::= { sispm1040582lrtPoePowerDelayTable 1 } SISPM1040582LRTPoePowerDelayEntry ::= SEQUENCE { sispm1040582lrtPoePowerDelayPort Integer32, sispm1040582lrtPoePowerDelayMode Integer32, sispm1040582lrtPoePowerDelayTime Integer32 } sispm1040582lrtPoePowerDelayPort OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtPoePowerDelayEntry 1 } sispm1040582lrtPoePowerDelayMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Turn on / off the power delay function, 0: disable, 1: enable, default: disable. " ::= { sispm1040582lrtPoePowerDelayEntry 2 } sispm1040582lrtPoePowerDelayTime OBJECT-TYPE SYNTAX Integer32(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "set Delay Time, default: 0, range: 0-300 sec. " ::= { sispm1040582lrtPoePowerDelayEntry 3 } sispm1040582lrtPoeAutoPowerReset OBJECT IDENTIFIER ::= { sispm1040582lrtPoe 3 } sispm1040582lrtPoeAutoPowerResetPingCheck OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "connection between PoE port and power device. 0: disable, 1: enable, default: disable. " ::= { sispm1040582lrtPoeAutoPowerReset 1 } sispm1040582lrtPoeAutoPowerResetTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeAutoPowerResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Auto Power Reset mode. " ::= { sispm1040582lrtPoeAutoPowerReset 2 } sispm1040582lrtPoeAutoPowerResetEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeAutoPowerResetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeAutoPowerResetPort } ::= { sispm1040582lrtPoeAutoPowerResetTable 1 } SISPM1040582LRTPoeAutoPowerResetEntry ::= SEQUENCE { sispm1040582lrtPoeAutoPowerResetPort Integer32, sispm1040582lrtPoeAutoPowerResetPingIPAddress DisplayString, sispm1040582lrtPoeAutoPowerResetStartupTime Integer32, sispm1040582lrtPoeAutoPowerResetIntervalTime Integer32, sispm1040582lrtPoeAutoPowerResetRetryTime Integer32, sispm1040582lrtPoeAutoPowerResetFailureLog DisplayString, sispm1040582lrtPoeAutoPowerResetFailureAction INTEGER, sispm1040582lrtPoeAutoPowerResetRebootTime Integer32, sispm1040582lrtPoeAutoPowerResetMaxRebootTimes Integer32 } sispm1040582lrtPoeAutoPowerResetPort OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 1 } sispm1040582lrtPoeAutoPowerResetPingIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address the system should ping. default: 0.0.0.0 . " ::= { sispm1040582lrtPoeAutoPowerResetEntry 2 } sispm1040582lrtPoeAutoPowerResetStartupTime OBJECT-TYPE SYNTAX Integer32(30..600) MAX-ACCESS read-write STATUS current DESCRIPTION "When PD has been start up, the Switch will wait Start up time to do PoE Auto Checking. default: 60, range: 30-600 sec. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 3 } sispm1040582lrtPoeAutoPowerResetIntervalTime OBJECT-TYPE SYNTAX Integer32(10..120) MAX-ACCESS read-write STATUS current DESCRIPTION "Device will send checking message to PD each interval time. default: 30, range: 10-120 sec. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 4 } sispm1040582lrtPoeAutoPowerResetRetryTime OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "It will retry to send detection again. default: 3, range: 1-5. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 5 } sispm1040582lrtPoeAutoPowerResetFailureLog OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Failure loggings counter. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 6 } sispm1040582lrtPoeAutoPowerResetFailureAction OBJECT-TYPE SYNTAX INTEGER { nothing(0), reboot(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "It will retry to send detection again, 0: Nothing, 1: Reboot Remote PD, default: Nothing. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 7 } sispm1040582lrtPoeAutoPowerResetRebootTime OBJECT-TYPE SYNTAX Integer32(3..120) MAX-ACCESS read-write STATUS current DESCRIPTION "When PD has been rebooted, the PoE port restored power after the specified time. default: 15, range: 3-120 sec. " ::= { sispm1040582lrtPoeAutoPowerResetEntry 8 } sispm1040582lrtPoeAutoPowerResetMaxRebootTimes OBJECT-TYPE SYNTAX Integer32(0..10) MAX-ACCESS read-write STATUS current DESCRIPTION "When Failure Action is Reboot Remote PD, it limits times of Reboot. default: 3, range: 0-10. 0 means without reboot limits." ::= { sispm1040582lrtPoeAutoPowerResetEntry 10 } sispm1040582lrtPoeScheduling OBJECT IDENTIFIER ::= { sispm1040582lrtPoe 4 } sispm1040582lrtPoeSchedulingProfileNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the PoE Profile Number that want to configure. Range:1-16" ::= { sispm1040582lrtPoeScheduling 1 } sispm1040582lrtPoeSchedulingPorofileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Profile Name. Maximum length:32." ::= { sispm1040582lrtPoeScheduling 2 } sispm1040582lrtPoeSchedulingTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeSchedulingTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Show Poe Scheduling Time Config. " ::= { sispm1040582lrtPoeScheduling 3 } sispm1040582lrtPoeSchedulingTimeEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeSchedulingTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeSchedulingTimeWeekIndex } ::= { sispm1040582lrtPoeSchedulingTimeTable 1 } SISPM1040582LRTPoeSchedulingTimeEntry ::= SEQUENCE { sispm1040582lrtPoeSchedulingTimeWeekIndex Integer32, sispm1040582lrtPoeSchedulingTimeStartTimeHourMinute DisplayString, sispm1040582lrtPoeSchedulingTimeEndTimeHourMinute DisplayString } sispm1040582lrtPoeSchedulingTimeWeekIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Week Index. 1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun" ::= { sispm1040582lrtPoeSchedulingTimeEntry 1 } sispm1040582lrtPoeSchedulingTimeStartTimeHourMinute OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Scheduling Start Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55." ::= { sispm1040582lrtPoeSchedulingTimeEntry 2 } sispm1040582lrtPoeSchedulingTimeEndTimeHourMinute OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Scheduling End Time. Format: HH:MM. Hour Range: 0-23. Minute Range:0,5,10,...,55." ::= { sispm1040582lrtPoeSchedulingTimeEntry 3 } sispm1040582lrtPoeConfiguration OBJECT IDENTIFIER ::= { sispm1040582lrtPoe 5 } sispm1040582lrtPoeConfigurationPowerManagementMode OBJECT-TYPE SYNTAX Integer32(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The power management mode for PoE port. 0: CLASS_RESERVED, 1: CLASS_CONSUMP, 2: ALLOCATED_RESERVED, 3: ALLOCATED_CONSUMP, 4: LLDPMED_RESERVED, 5: LLDPMED_CONSUMP, default: CLASS_RESERVED. " ::= { sispm1040582lrtPoeConfiguration 1 } sispm1040582lrtPoeConfigurationCapacitorDetection OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The capacitor detection mode. 0: Disable 1: Enable " ::= { sispm1040582lrtPoeConfiguration 2 } --sispm1040582lrtPoeConfigurationPowerExtraMode OBJECT-TYPE -- SYNTAX Integer32 -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The power extra mode for PoE port. -- 0: Normal Mode -- 1: Extra Mode" -- ::= { sispm1040582lrtPoeConfiguration 3 } sispm1040582lrtPoeConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Configuration mode. " ::= { sispm1040582lrtPoeConfiguration 4 } sispm1040582lrtPoeConfigurationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeConfigurationSwitch } ::= { sispm1040582lrtPoeConfigurationTable 1 } SISPM1040582LRTPoeConfigurationEntry ::= SEQUENCE { sispm1040582lrtPoeConfigurationSwitch Integer32, sispm1040582lrtPoeConfigurationPrimaryPowerSupply Integer32, sispm1040582lrtPoeConfigurationAlwaysONPoE Integer32 } sispm1040582lrtPoeConfigurationSwitch OBJECT-TYPE SYNTAX Integer32 (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION " switch index, range : 1 - 16. " ::= { sispm1040582lrtPoeConfigurationEntry 1 } sispm1040582lrtPoeConfigurationPrimaryPowerSupply OBJECT-TYPE SYNTAX Integer32(0..2000) MAX-ACCESS read-only STATUS current DESCRIPTION "It must be defined what amount of power the primary and backup power sources can deliver. " ::= { sispm1040582lrtPoeConfigurationEntry 3 } sispm1040582lrtPoeConfigurationAlwaysONPoE OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure always-on-poe" ::= { sispm1040582lrtPoeConfigurationEntry 4 } sispm1040582lrtPoeConfigurationPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeConfigurationPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Port Configuration mode. " ::= { sispm1040582lrtPoeConfiguration 5 } sispm1040582lrtPoeConfigurationPortEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeConfigurationPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeConfigurationPort } ::= { sispm1040582lrtPoeConfigurationPortTable 1 } SISPM1040582LRTPoeConfigurationPortEntry ::= SEQUENCE { sispm1040582lrtPoeConfigurationPort Integer32, sispm1040582lrtPoeConfigurationPortPoEMode INTEGER, sispm1040582lrtPoeConfigurationPortPriority INTEGER, sispm1040582lrtPoeConfigurationPortMaximumPower DisplayString, sispm1040582lrtPoeConfigurationPortDetection Integer32, -- sispm1040582lrtPoeConfigurationPortPoEScheduleByProfileID Integer32, sispm1040582lrtPoeConfigurationPortPoEScheduleByProfileName DisplayString } sispm1040582lrtPoeConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION " port, range : 1 - port number. " ::= { sispm1040582lrtPoeConfigurationPortEntry 1 } sispm1040582lrtPoeConfigurationPortPoEMode OBJECT-TYPE SYNTAX INTEGER { disable(0), twopair(1), fourpair(2), enable(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "The PoE Mode represents the PoE operating mode for the port. 0: Disable, 1: 2-pair, 2: 4-pair, 3: Enabled default: Enabled. " ::= { sispm1040582lrtPoeConfigurationPortEntry 2 } sispm1040582lrtPoeConfigurationPortPriority OBJECT-TYPE SYNTAX INTEGER { low(0), high(1), critical(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Priority represents the ports priority. There are three levels of power priority named Low, High and Critical. 0: Low, 1: High, 2: Critical, default: Low. " ::= { sispm1040582lrtPoeConfigurationPortEntry 3 } sispm1040582lrtPoeConfigurationPortMaximumPower OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The Maximum Power value contains a numerical value that indicates the maximum power in watts that can be delivered to a remote device. max: 90[W]. " ::= { sispm1040582lrtPoeConfigurationPortEntry 4 } sispm1040582lrtPoeConfigurationPortDetection OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS read-write STATUS current DESCRIPTION "The Detection represents the PoE capacitor detection for the port. -1:Not support. 1:Legacy : Legacy capacitive detection only. 2:4-point : IEEE 802.3af 4-point detection only. 3:4-point-legacy : IEEE 802.3af 4-point detection followed by Legacy detection. 4:2-point : IEEE 802.3af 2-point detection only. 5:2-point-legacy : IEEE 802.3af 2-point detection followed by Legacy detection. " ::= { sispm1040582lrtPoeConfigurationPortEntry 5 } -- sispm1040582lrtPoeConfigurationPortPoEScheduleByProfileID OBJECT-TYPE -- SYNTAX Integer32(0..16) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Specify a valid PoE schedule profile by profile id. 0:disable,1-16:1-16 profile." -- ::= { sispm1040582lrtPoeConfigurationPortEntry 6 } sispm1040582lrtPoeConfigurationPortPoEScheduleByProfileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Specify a valid PoE schedule profile by profile name. disabled: disable profile schedule." ::= { sispm1040582lrtPoeConfigurationPortEntry 7 } sispm1040582lrtPoeChipsetRebootSchedule OBJECT IDENTIFIER ::= { sispm1040582lrtPoe 6 } sispm1040582lrtPoeChipsetRebootMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Chipset Reboot Mode 0:disable 1:enable" ::= { sispm1040582lrtPoeChipsetRebootSchedule 1 } sispm1040582lrtPoeChipsetRebootTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPoeChipsetRebootTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure PoE Chipset Reboot Time." ::= { sispm1040582lrtPoeChipsetRebootSchedule 2 } sispm1040582lrtPoeChipsetRebootTimeEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPoeChipsetRebootTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPoeChipsetRebootWeekIndex } ::= { sispm1040582lrtPoeChipsetRebootTimeTable 1 } SISPM1040582LRTPoeChipsetRebootTimeEntry ::= SEQUENCE { sispm1040582lrtPoeChipsetRebootWeekIndex Integer32, sispm1040582lrtPoeChipsetRebootTimeHour Integer32, sispm1040582lrtPoeChipsetRebootTimeMinute Integer32 } sispm1040582lrtPoeChipsetRebootWeekIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "PoE chipset reboot week index. 1: Mon, 2:Tue, 3: Wed, 4: Thu, 5: Fri, 6: Sat, 7: Sun" ::= { sispm1040582lrtPoeChipsetRebootTimeEntry 1 } sispm1040582lrtPoeChipsetRebootTimeHour OBJECT-TYPE SYNTAX Integer32 (-1..23) MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Chipset Reboot Time (Hour). Range: 0-23. -1:disable" ::= { sispm1040582lrtPoeChipsetRebootTimeEntry 2 } sispm1040582lrtPoeChipsetRebootTimeMinute OBJECT-TYPE SYNTAX Integer32 (-1..55) MAX-ACCESS read-write STATUS current DESCRIPTION "PoE Chipset Reboot Time (Minute). Range:0,5,10,...,55. -1:disable" ::= { sispm1040582lrtPoeChipsetRebootTimeEntry 3 } -- ======================================================================================================================= -- RowStatus Info: createAndWait, notReady, notInService not supported. -- ======================================================================================================================= -- Textual Conventions for the sispm1040582lrt AAA Mib -- ======================================================================================================================= -- sispm1040582lrtAAAMIB OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 15 } sispm1040582lrtAAA OBJECT IDENTIFIER ::= { sispm1040582lrtAAAMIB 1 } sispm1040582lrtRADIUS OBJECT IDENTIFIER ::= { sispm1040582lrtAAA 1 } sispm1040582lrtRADIUSGlobalConfig OBJECT IDENTIFIER ::= { sispm1040582lrtRADIUS 1 } sispm1040582lrtTACACS OBJECT IDENTIFIER ::= { sispm1040582lrtAAA 2 } -- -- ======================================================================================================================= -- Start sispm1040582lrtRADIUS group -- ======================================================================================================================= --sispm1040582lrtRADIUSGlobalConfig sispm1040582lrtRADIUSGlobalConfigTimeout OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout is the number of seconds, to wait for a reply from a RADIUS server before retransmitting the request. range: 1-1000." ::= { sispm1040582lrtRADIUSGlobalConfig 1 } sispm1040582lrtRADIUSGlobalConfigRetransmit OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Retransmit is the number of times,a RADIUS request is retransmitted to a server that is not responding.If the server has not responded after the last retransmit it is considered to be dead. range: 1-1000." ::= { sispm1040582lrtRADIUSGlobalConfig 2 } sispm1040582lrtRADIUSGlobalConfigDeadtime OBJECT-TYPE SYNTAX Integer32(0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "This will stop the switch from continually trying to contact a server that it has already determined as dead. range: 0-1440." ::= { sispm1040582lrtRADIUSGlobalConfig 3 } sispm1040582lrtRADIUSGlobalConfigKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret key shared between the RADIUS server and the switch." ::= { sispm1040582lrtRADIUSGlobalConfig 4 } sispm1040582lrtRADIUSGlobalConfigNASIPv4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets." ::= { sispm1040582lrtRADIUSGlobalConfig 5 } sispm1040582lrtRADIUSGlobalConfigNASIPv6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. " ::= { sispm1040582lrtRADIUSGlobalConfig 6 } sispm1040582lrtRADIUSGlobalConfigNASIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The identifier to be used as attribute 32 in RADIUS Access-Request packets. " ::= { sispm1040582lrtRADIUSGlobalConfig 7 } --sispm1040582lrtRADIUSServerConfigTable sispm1040582lrtRADIUSServerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTRADIUSServerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RADIUS Server Configuration Table." ::= { sispm1040582lrtRADIUS 2 } sispm1040582lrtRADIUSServerConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTRADIUSServerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RADIUS Server Configuration Entry." INDEX { sispm1040582lrtRADIUSServerConfServerNo } ::= { sispm1040582lrtRADIUSServerConfigTable 1 } SISPM1040582LRTRADIUSServerConfigEntry ::= SEQUENCE { sispm1040582lrtRADIUSServerConfServerNo Integer32, sispm1040582lrtRADIUSServerConfHostname DisplayString, sispm1040582lrtRADIUSServerConfAuthPort Integer32, sispm1040582lrtRADIUSServerConfAcctPort Integer32, sispm1040582lrtRADIUSServerConfTimeout Integer32, sispm1040582lrtRADIUSServerConfRetransmit Integer32, sispm1040582lrtRADIUSServerConfKey DisplayString, sispm1040582lrtRADIUSServerConfRowStatus RowStatus } sispm1040582lrtRADIUSServerConfServerNo OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RADIUS server number. max: 5." ::= { sispm1040582lrtRADIUSServerConfigEntry 1 } sispm1040582lrtRADIUSServerConfHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address or hostname of the RADIUS server. " ::= { sispm1040582lrtRADIUSServerConfigEntry 2 } sispm1040582lrtRADIUSServerConfAuthPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP port to use on the RADIUS server for authentication. range: 0-65535. " ::= { sispm1040582lrtRADIUSServerConfigEntry 3 } sispm1040582lrtRADIUSServerConfAcctPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP port to use on the RADIUS server for accounting. range: 0-65535. " ::= { sispm1040582lrtRADIUSServerConfigEntry 4 } sispm1040582lrtRADIUSServerConfTimeout OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "This optional setting overrides the global timeout value. Leaving it blank will use the global timeout value. range: 1-1000. " ::= { sispm1040582lrtRADIUSServerConfigEntry 5 } sispm1040582lrtRADIUSServerConfRetransmit OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "This optional setting overrides the global retransmit value. Leaving it blank will use the global retransmit value. range: 1-1000. " ::= { sispm1040582lrtRADIUSServerConfigEntry 6 } sispm1040582lrtRADIUSServerConfKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This optional setting overrides the global key. Leaving it blank will use the global key." ::= { sispm1040582lrtRADIUSServerConfigEntry 7 } sispm1040582lrtRADIUSServerConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtRADIUSServerConfigEntry 8 } --sispm1040582lrtRADIUSDetailTable sispm1040582lrtRADIUSDetailTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTRADIUSDetailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RADIUS Detail Table." ::= { sispm1040582lrtRADIUS 3 } sispm1040582lrtRADIUSDetailEntry OBJECT-TYPE SYNTAX SISPM1040582LRTRADIUSDetailEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RADIUS Detail Entry." INDEX { sispm1040582lrtRADIUSServerConfServerNo } ::= { sispm1040582lrtRADIUSDetailTable 1 } SISPM1040582LRTRADIUSDetailEntry ::= SEQUENCE { sispm1040582lrtRADIUSAuthIPAddress DisplayString, sispm1040582lrtRADIUSAuthStatus DisplayString, sispm1040582lrtRADIUSAuthRoundTripTime Integer32, sispm1040582lrtRADIUSAuthRxAccessAccept Counter32, sispm1040582lrtRADIUSAuthRxAccessReject Counter32, sispm1040582lrtRADIUSAuthRxAccessChallenge Counter32, sispm1040582lrtRADIUSAuthRxAccessResponse Counter32, sispm1040582lrtRADIUSAuthRxBadAuth Counter32, sispm1040582lrtRADIUSAuthRxUnknownType Counter32, sispm1040582lrtRADIUSAuthRxPacketsDropped Counter32, sispm1040582lrtRADIUSAuthTxAccessRequest Counter32, sispm1040582lrtRADIUSAuthTxAccessRetransmission Counter32, sispm1040582lrtRADIUSAuthTxPendingRequest Counter32, sispm1040582lrtRADIUSAuthTxTimeout Counter32, sispm1040582lrtRADIUSAccountIPAddress IpAddress, sispm1040582lrtRADIUSAccountStatus DisplayString, sispm1040582lrtRADIUSAccountRoundTripTime Integer32, sispm1040582lrtRADIUSAccountRxResponses Counter32, sispm1040582lrtRADIUSAccountRxMalformedResponse Counter32, sispm1040582lrtRADIUSAccountRxBadAuth Counter32, sispm1040582lrtRADIUSAccountRxUnknownType Counter32, sispm1040582lrtRADIUSAccountRxPacketsDrop Counter32, sispm1040582lrtRADIUSAccountTxRequest Counter32, sispm1040582lrtRADIUSAccountTxRetransmission Counter32, sispm1040582lrtRADIUSAccountTxPendingRequest Counter32, sispm1040582lrtRADIUSAccountTxTimeout Counter32, sispm1040582lrtRADIUSDetailClearCmd ActivateCmd } sispm1040582lrtRADIUSAuthIPAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IP address and UDP port for the authentication server in question." ::= { sispm1040582lrtRADIUSDetailEntry 2 } sispm1040582lrtRADIUSAuthStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the state of the server." ::= { sispm1040582lrtRADIUSDetailEntry 3 } sispm1040582lrtRADIUSAuthRoundTripTime OBJECT-TYPE SYNTAX Integer32(0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server." ::= { sispm1040582lrtRADIUSDetailEntry 4 } sispm1040582lrtRADIUSAuthRxAccessAccept OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets (valid or invalid) received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 5 } sispm1040582lrtRADIUSAuthRxAccessReject OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets (valid or invalid) received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 6 } sispm1040582lrtRADIUSAuthRxAccessChallenge OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets (valid or invalid) received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 7 } sispm1040582lrtRADIUSAuthRxAccessResponse OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS Access-Response packets received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 8 } sispm1040582lrtRADIUSAuthRxBadAuth OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Response packets containing invalid authenticators or Message Authenticator attributes received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 9 } sispm1040582lrtRADIUSAuthRxUnknownType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received with unknown types from the server on the authentication port and dropped." ::= { sispm1040582lrtRADIUSDetailEntry 10 } sispm1040582lrtRADIUSAuthRxPacketsDropped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from the server on the authentication port and dropped for some other reason." ::= { sispm1040582lrtRADIUSDetailEntry 11 } sispm1040582lrtRADIUSAuthTxAccessRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to the server. This does not include retransmissions." ::= { sispm1040582lrtRADIUSDetailEntry 12 } sispm1040582lrtRADIUSAuthTxAccessRetransmission OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets retransmitted to the RADIUS authentication server." ::= { sispm1040582lrtRADIUSDetailEntry 13 } sispm1040582lrtRADIUSAuthTxPendingRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets destined for the server that have not yet timed out or received a response. " ::= { sispm1040582lrtRADIUSDetailEntry 14 } sispm1040582lrtRADIUSAuthTxTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of authentication timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up." ::= { sispm1040582lrtRADIUSDetailEntry 15 } sispm1040582lrtRADIUSAccountIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IP address and UDP port for the authentication server in question." ::= { sispm1040582lrtRADIUSDetailEntry 16 } sispm1040582lrtRADIUSAccountStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the state of the server. " ::= { sispm1040582lrtRADIUSDetailEntry 17 } sispm1040582lrtRADIUSAccountRoundTripTime OBJECT-TYPE SYNTAX Integer32(0..100000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The time interval (measured in milliseconds) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from the RADIUS authentication server." ::= { sispm1040582lrtRADIUSDetailEntry 18 } sispm1040582lrtRADIUSAccountRxResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets (valid or invalid) received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 19 } sispm1040582lrtRADIUSAccountRxMalformedResponse OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed RADIUS packets received from the server. " ::= { sispm1040582lrtRADIUSDetailEntry 20 } sispm1040582lrtRADIUSAccountRxBadAuth OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets containing invalid authenticators received from the server." ::= { sispm1040582lrtRADIUSDetailEntry 21 } sispm1040582lrtRADIUSAccountRxUnknownType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets of unknown types that were received from the server on the accounting port. " ::= { sispm1040582lrtRADIUSDetailEntry 22 } sispm1040582lrtRADIUSAccountRxPacketsDrop OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that were received from the server on the accounting port and dropped for some other reason." ::= { sispm1040582lrtRADIUSDetailEntry 23 } sispm1040582lrtRADIUSAccountTxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets sent to the server. This does not include retransmissions." ::= { sispm1040582lrtRADIUSDetailEntry 24 } sispm1040582lrtRADIUSAccountTxRetransmission OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets retransmitted to the RADIUS accounting server." ::= { sispm1040582lrtRADIUSDetailEntry 25 } sispm1040582lrtRADIUSAccountTxPendingRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets destined for the server that have not yet timed out or received a response." ::= { sispm1040582lrtRADIUSDetailEntry 26 } sispm1040582lrtRADIUSAccountTxTimeout OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of accounting timeouts to the server. After a timeout, the client may retry to the same server, send to a different server, or give up." ::= { sispm1040582lrtRADIUSDetailEntry 27 } sispm1040582lrtRADIUSDetailClearCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-only STATUS current DESCRIPTION "Clears the counters for the selected server." ::= { sispm1040582lrtRADIUSDetailEntry 28 } -- -- ======================================================================================================================= -- Start sispm1040582lrtTACACS group -- ======================================================================================================================= --sispm1040582lrtTACACSGlobalConfig sispm1040582lrtTACACSGlobalConfigTimeout OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "Timeout is the number of seconds,to wait for a reply from a TACACS+ server before it is considered to be dead. range: 1-1000 seconds, default: 5 seconds." ::= { sispm1040582lrtTACACS 1 } sispm1040582lrtTACACSGlobalConfigDeadtime OBJECT-TYPE SYNTAX Integer32(0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "The period during which the switch will not send new requests to a server that has failed to respond to a previous request. This will stop the switch from continually trying to contact a server that it has already determined as dead. range: 0-1440 minutes, default: 0 minutes." ::= { sispm1040582lrtTACACS 2 } sispm1040582lrtTACACSGlobalConfigKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The secret key shared between the TACACS+ server and the switch." ::= { sispm1040582lrtTACACS 3 } --sispm1040582lrtTACACSServerConfigTable sispm1040582lrtTACACSServerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTTACACSServerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TACACS Server configuration Table." ::= { sispm1040582lrtTACACS 4 } sispm1040582lrtTACACSServerConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTTACACSServerConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TACACS Server configuration Entry." INDEX { sispm1040582lrtTACACSServerConfigServerNo } ::= { sispm1040582lrtTACACSServerConfigTable 1 } SISPM1040582LRTTACACSServerConfigEntry ::= SEQUENCE { sispm1040582lrtTACACSServerConfigServerNo Integer32, sispm1040582lrtTACACSServerConfigHostname DisplayString, sispm1040582lrtTACACSServerConfigPort Integer32, sispm1040582lrtTACACSServerConfigTimeout Integer32, sispm1040582lrtTACACSServerConfigKey DisplayString, sispm1040582lrtTACACSServerConfigRowStatus RowStatus } sispm1040582lrtTACACSServerConfigServerNo OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The TACACS server number. max: 5." ::= { sispm1040582lrtTACACSServerConfigEntry 1 } sispm1040582lrtTACACSServerConfigHostname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address or hostname of the TACACS+ server." ::= { sispm1040582lrtTACACSServerConfigEntry 2 } sispm1040582lrtTACACSServerConfigPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP port to use on the TACACS+ server for authentication." ::= { sispm1040582lrtTACACSServerConfigEntry 3 } sispm1040582lrtTACACSServerConfigTimeout OBJECT-TYPE SYNTAX Integer32(1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "This optional setting overrides the global timeout value. Leaving it blank will use the global timeout value. range: 1-1000." ::= { sispm1040582lrtTACACSServerConfigEntry 4 } sispm1040582lrtTACACSServerConfigKey OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "This optional setting overrides the global key. Leaving it blank will use the global key. " ::= { sispm1040582lrtTACACSServerConfigEntry 5 } sispm1040582lrtTACACSServerConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtTACACSServerConfigEntry 6 } -- ======================================================================================================================= -- -- ======================================================================================================================= -- Textual Conventions for the sispm1040582lrt Nas Mib -- ======================================================================================================================= -- sispm1040582lrtNasMIB OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 16 } sispm1040582lrtNAS OBJECT IDENTIFIER ::= { sispm1040582lrtNasMIB 1 } sispm1040582lrtNASConf OBJECT IDENTIFIER ::= { sispm1040582lrtNAS 1 } sispm1040582lrtNASStatus OBJECT IDENTIFIER ::= { sispm1040582lrtNAS 2 } -- -- ======================================================================================================================= -- Start sispm1040582lrtNAS group -- ======================================================================================================================= --sispm1040582lrtNASConf sispm1040582lrtNASConfMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if NAS is globally enabled or disabled on the switch." DEFVAL { disable } ::= { sispm1040582lrtNASConf 1 } sispm1040582lrtNASConfReauthenticationEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "If enable, successfully authenticated supplicants/clients are reauthenticated after the interval specified by the Reauthentication Period." DEFVAL { disable } ::= { sispm1040582lrtNASConf 2 } sispm1040582lrtNASConfReauthenticationPeriod OBJECT-TYPE SYNTAX Integer32(1..3600) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the period, in seconds, after which a connected client must be reauthenticated. default: 3600 sec, range: 1-3600 sec." ::= { sispm1040582lrtNASConf 3 } sispm1040582lrtNASConfEAPOLTimeout OBJECT-TYPE SYNTAX Integer32(1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the time for retransmission of Request Identity EAPOL frames. default: 30 sec, range: 1-65535 sec." ::= { sispm1040582lrtNASConf 4 } sispm1040582lrtNASConfAgingPeriod OBJECT-TYPE SYNTAX Integer32(0|10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "When the NAS module uses the Port Security module to secure MAC addresses, the Port Security module needs to check for activity on the MAC address in question at regular intervals and free resources if no activity is seen within a given period of time. default: 300 sec, 0: no support. range: 0,10-1000000 sec." ::= { sispm1040582lrtNASConf 5 } sispm1040582lrtNASConfHoldTime OBJECT-TYPE SYNTAX Integer32(0|10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "If a client is denied access - either because the RADIUS server denies the client access or because the RADIUS server request times out - the client is put on hold in the Unauthorized state. default: 10 sec, 0: no support. range: 0,10-1000000 sec." ::= { sispm1040582lrtNASConf 6 } sispm1040582lrtNASConfRADIUSQoSEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "RADIUS-assigned QoS provides a means to centrally control the traffic class to which traffic coming from a successfully authenticated supplicant is assigned on the switch." DEFVAL { disable } ::= { sispm1040582lrtNASConf 7 } sispm1040582lrtNASConfRADIUSVLANEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "RADIUS-assigned VLAN provides a means to centrally control the VLAN on which a successfully authenticated supplicant is placed on the switch." DEFVAL { disable } ::= { sispm1040582lrtNASConf 8 } sispm1040582lrtNASConfGuestVLANEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "A Guest VLAN is a special VLAN - typically with limited network access - on which 802.1X-unaware clients are placed after a network administrator-defined timeout." DEFVAL { disable } ::= { sispm1040582lrtNASConf 9 } sispm1040582lrtNASConfGuestVLANID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the value that a port's Port VLAN ID is set to if a port is moved into the Guest VLAN. default: 1, range: 1-4095." ::= { sispm1040582lrtNASConf 10 } sispm1040582lrtNASConfMaxReauthCount OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of times the switch transmits an EAPOL Request Identity frame without response before considering entering the Guest VLAN is adjusted with this setting. default: 2, range: 1-255." ::= { sispm1040582lrtNASConf 11 } sispm1040582lrtNASConfAllowGuestVLAN OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "The switch remembers if an EAPOL frame has been received on the port for the life-time of the port." DEFVAL { disable } ::= { sispm1040582lrtNASConf 12 } --sispm1040582lrtNASPortConfTable sispm1040582lrtNASPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTNASPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NAS Port Configuration Table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtNASConf 13 } sispm1040582lrtNASPortConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTNASPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NAS Port Configuration Entry." INDEX { ifIndex } ::= { sispm1040582lrtNASPortConfTable 1 } SISPM1040582LRTNASPortConfEntry ::= SEQUENCE { sispm1040582lrtNASPortConfAdminState Integer32, sispm1040582lrtNASPortConfRADIUSQoSEnabled AdminMode, sispm1040582lrtNASPortConfRADIUSVLANEnabled AdminMode, sispm1040582lrtNASPortConfGuestVLANEnabled AdminMode, sispm1040582lrtNASPortConfPortState DisplayString, sispm1040582lrtNASPortConfReauthenticateCmd INTEGER, sispm1040582lrtNASPortConfReinitializeCmd INTEGER } sispm1040582lrtNASPortConfAdminState OBJECT-TYPE SYNTAX Integer32(0..5) MAX-ACCESS read-write STATUS current DESCRIPTION "This selection controls the port's authentication mode. 0: Force Authorized, 1: Force Unauthorized, 2: Port-based 802.1X, 3: Single 802.1X, 4: Multi 802.1X, 5: MAC-based Auth, range: 0-5." ::= { sispm1040582lrtNASPortConfEntry 2 } sispm1040582lrtNASPortConfRADIUSQoSEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "When RADIUS-Assigned QoS is both globally enabled and enabled on a given port, the switch reacts to QoS Class information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated." ::= { sispm1040582lrtNASPortConfEntry 3 } sispm1040582lrtNASPortConfRADIUSVLANEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "When RADIUS-Assigned VLAN is both globally enabled and enabled for a given port, the switch reacts to VLAN ID information carried in the RADIUS Access-Accept packet transmitted by the RADIUS server when a supplicant is successfully authenticated." ::= { sispm1040582lrtNASPortConfEntry 4 } sispm1040582lrtNASPortConfGuestVLANEnabled OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "When Guest VLAN is both globally enabled and enabled for a given port, the switch considers moving the port into the Guest VLAN according to the rules." ::= { sispm1040582lrtNASPortConfEntry 5 } sispm1040582lrtNASPortConfPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the port." ::= { sispm1040582lrtNASPortConfEntry 6 } sispm1040582lrtNASPortConfReauthenticateCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Schedules a reauthentication whenever the quiet-period of the port runs out (EAPOL-based authentication). For MAC-based authentication, reauthentication will be attempted immediately.The button only has effect for successfully authenticated clients on the port and will not cause the clients to get temporarily unauthorized." DEFVAL { noAction } ::= { sispm1040582lrtNASPortConfEntry 7 } sispm1040582lrtNASPortConfReinitializeCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Forces a reinitialization of the clients on the port and thereby a reauthentication immediately. The clients will transfer to the unauthorized state while the reauthentication is in progress." DEFVAL { noAction } ::= { sispm1040582lrtNASPortConfEntry 8 } --sispm1040582lrtNASSwitchStatusTable sispm1040582lrtNASSwitchStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTNASSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NAS Switch Status Table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtNASStatus 1 } sispm1040582lrtNASSwitchStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTNASSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NAS Switch Status Entry." INDEX { ifIndex } ::= { sispm1040582lrtNASSwitchStatusTable 1 } SISPM1040582LRTNASSwitchStatusEntry ::= SEQUENCE { sispm1040582lrtNASSwitchStatusAdminState DisplayString, sispm1040582lrtNASSwitchStatusPortState DisplayString, sispm1040582lrtNASSwitchStatusLastSource DisplayString, sispm1040582lrtNASSwitchStatusLastID DisplayString, sispm1040582lrtNASSwitchStatusQoSClass DisplayString, sispm1040582lrtNASSwitchStatusPortVLANID DisplayString } sispm1040582lrtNASSwitchStatusAdminState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The port's current administrative state." ::= { sispm1040582lrtNASSwitchStatusEntry 2 } sispm1040582lrtNASSwitchStatusPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the port." ::= { sispm1040582lrtNASSwitchStatusEntry 3 } sispm1040582lrtNASSwitchStatusLastSource OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The source MAC address carried in the most recently received EAPOL frame for EAPOL-based authentication, and the most recently received frame from a new client for MAC-based authentication." ::= { sispm1040582lrtNASSwitchStatusEntry 4 } sispm1040582lrtNASSwitchStatusLastID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame for EAPOL-based authentication, and the source MAC address from the most recently received frame from a new client for MAC-based authentication." ::= { sispm1040582lrtNASSwitchStatusEntry 5 } sispm1040582lrtNASSwitchStatusQoSClass OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "QoS Class assigned to the port by the RADIUS server if enabled." ::= { sispm1040582lrtNASSwitchStatusEntry 6 } sispm1040582lrtNASSwitchStatusPortVLANID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID that NAS has put the port in." ::= { sispm1040582lrtNASSwitchStatusEntry 7 } --sispm1040582lrtNASPortCounterTable sispm1040582lrtNASPortCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTNASPortCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NAS Port Counter Table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtNASStatus 2 } sispm1040582lrtNASPortCounterEntry OBJECT-TYPE SYNTAX SISPM1040582LRTNASPortCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NAS Port Counter Entry." INDEX { ifIndex } ::= { sispm1040582lrtNASPortCounterTable 1 } SISPM1040582LRTNASPortCounterEntry ::= SEQUENCE { sispm1040582lrtNASReceiveEAPOLTotal Integer32, sispm1040582lrtNASReceiveEAPOLResponseID Integer32, sispm1040582lrtNASReceiveEAPOLResponses Integer32, sispm1040582lrtNASReceiveEAPOLStart Integer32, sispm1040582lrtNASReceiveEAPOLLogoff Integer32, sispm1040582lrtNASReceiveEAPOLInvalidType Integer32, sispm1040582lrtNASReceiveEAPOLInvalidLength Integer32, sispm1040582lrtNASTransmitEAPOLTotal Integer32, sispm1040582lrtNASTransmitEAPOLRequestID Integer32, sispm1040582lrtNASTransmitEAPOLRequests Integer32, sispm1040582lrtNASPortReceiveBackendServerAccessChallenges Integer32, sispm1040582lrtNASPortReceiveBackendServerOtherRequests Integer32, sispm1040582lrtNASPortReceiveBackendServerAuthSuccesses Integer32, sispm1040582lrtNASPortReceiveBackendServerAuthFailures Integer32, sispm1040582lrtNASPortTransmitBackendServerResponses Integer32, sispm1040582lrtNASSupplicantInfoMAC DisplayString, sispm1040582lrtNASSupplicantInfoVlanID Integer32, sispm1040582lrtNASSupplicantInfoVersion Integer32, sispm1040582lrtNASSupplicantInfoIdentity DisplayString, sispm1040582lrtNASPortCounterClearCmd ActivateCmd } sispm1040582lrtNASReceiveEAPOLTotal OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 2 } sispm1040582lrtNASReceiveEAPOLResponseID OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Response Identity frames that have been received by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 3 } sispm1040582lrtNASReceiveEAPOLResponses OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL response frames (other than Response Identity frames) that have been received by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 4 } sispm1040582lrtNASReceiveEAPOLStart OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 5 } sispm1040582lrtNASReceiveEAPOLLogoff OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Logoff frames that have been received by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 6 } sispm1040582lrtNASReceiveEAPOLInvalidType OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the frame type is not recognized. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 7 } sispm1040582lrtNASReceiveEAPOLInvalidLength OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by the switch in which the Packet Body Length field is invalid. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 8 } sispm1040582lrtNASTransmitEAPOLTotal OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 9 } sispm1040582lrtNASTransmitEAPOLRequestID OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Request Identity frames that have been transmitted by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 10 } sispm1040582lrtNASTransmitEAPOLRequests OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL Request frames (other than Request Identity frames) that have been transmitted by the switch. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 11 } sispm1040582lrtNASPortReceiveBackendServerAccessChallenges OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch receives the first request from the backend server following the first response from the supplicant. Indicates that the backend server has communication with the switch. MAC-based:Counts all Access Challenges received from the backend server for this port (left-most table). -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 12 } sispm1040582lrtNASPortReceiveBackendServerOtherRequests OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based: Counts the number of times that the switch sends an EAP Request packet following the first to the supplicant. Indicates that the backend server chose an EAP-method. MAC-based: Not applicable. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 13 } sispm1040582lrtNASPortReceiveBackendServerAuthSuccesses OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X- and MAC-based: Counts the number of times that the switch receives a success indication.Indicates that the supplicant has successfully authenticated to the backend server. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 14 } sispm1040582lrtNASPortReceiveBackendServerAuthFailures OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X- and MAC-based:Counts the number of times that the switch receives a failure message.This indicates that the supplicant has not authenticated to the backend server. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 15 } sispm1040582lrtNASPortTransmitBackendServerResponses OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based:Counts the number of times that the switch attempts to send a supplicant's first response packet to the backend server. Indicates the switch attempted communication with the backend server. Possible retransmissions are not counted. MAC-based: Counts all the backend server packets sent from the switch towards the backend server for a given port (left-most table). Possible retransmissions are not counted. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 16 } sispm1040582lrtNASSupplicantInfoMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the last supplicant. " ::= { sispm1040582lrtNASPortCounterEntry 17 } sispm1040582lrtNASSupplicantInfoVlanID OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID on which the last frame from the last supplicant was received. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 18 } sispm1040582lrtNASSupplicantInfoVersion OBJECT-TYPE SYNTAX Integer32(-1..1000000) MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based:The protocol version number carried in the most recently received EAPOL frame. MAC-based: Not applicable. -1: no support." ::= { sispm1040582lrtNASPortCounterEntry 19 } sispm1040582lrtNASSupplicantInfoIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "802.1X-based:The user name (supplicant identity) carried in the most recently received Response Identity EAPOL frame. MAC-based: Not applicable. " ::= { sispm1040582lrtNASPortCounterEntry 20 } sispm1040582lrtNASPortCounterClearCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Clear the counters for the selected port." ::= { sispm1040582lrtNASPortCounterEntry 21 } -- ======================================================================================================================= sispm1040582lrtMACConf OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 17 } sispm1040582lrtMAC OBJECT IDENTIFIER ::= { sispm1040582lrtMACConf 1 } -- -- ======================================================================================================================= -- Start sispm1040582lrtMAC group -- ======================================================================================================================= sispm1040582lrtMACDisableAutomaticAging OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Disable the automatic aging of dynamic entries." ::= { sispm1040582lrtMAC 1 } sispm1040582lrtMACAgingTime OBJECT-TYPE SYNTAX Integer32 (-1 | 10..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "Configure aging time by entering a value here in seconds. range: 10-1000000 seconds. -1: Automatic Aging is disable." ::= { sispm1040582lrtMAC 2 } --sispm1040582lrtMACLearningTable sispm1040582lrtMACLearningTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTMACLearningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mac learning table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtMAC 3 } sispm1040582lrtMACLearningEntry OBJECT-TYPE SYNTAX SISPM1040582LRTMACLearningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The mac learning entry." INDEX { ifIndex } ::= { sispm1040582lrtMACLearningTable 1 } SISPM1040582LRTMACLearningEntry ::= SEQUENCE { sispm1040582lrtMACTableLearning INTEGER } sispm1040582lrtMACTableLearning OBJECT-TYPE SYNTAX INTEGER{ auto(0), disable(1), secure(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "auto(0) : Learning is done automatically as soon as a frame with unknown SMAC is received. disable(1): Disable, No learning is done. secure(2) : Secure, Only static MAC entries are learned, all other frames are dropped." ::= { sispm1040582lrtMACLearningEntry 2 } --sispm1040582lrtMACStaticConfigTable sispm1040582lrtMACStaticConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTMACStaticConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static Mac config table." ::= { sispm1040582lrtMAC 4 } sispm1040582lrtMACStaticConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTMACStaticConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static Mac config entry." INDEX { sispm1040582lrtMACStaticConfigIndex } ::= { sispm1040582lrtMACStaticConfigTable 1 } SISPM1040582LRTMACStaticConfigEntry ::= SEQUENCE { sispm1040582lrtMACStaticConfigSwitchIndex Integer32, sispm1040582lrtMACStaticConfigIndex Integer32, sispm1040582lrtMACStaticConfigVID Integer32, sispm1040582lrtMACStaticConfigMACaddress DisplayString, sispm1040582lrtMACStaticConfigPortList DisplayString, sispm1040582lrtMACStaticConfigRowStatus RowStatus } sispm1040582lrtMACStaticConfigSwitchIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch Index." ::= { sispm1040582lrtMACStaticConfigEntry 1 } sispm1040582lrtMACStaticConfigIndex OBJECT-TYPE SYNTAX Integer32(1..64) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The static entries in the MAC table are shown in this table. The static MAC table can contain 64 entries." ::= { sispm1040582lrtMACStaticConfigEntry 2 } sispm1040582lrtMACStaticConfigVID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID of the entry. range: 1-4095." ::= { sispm1040582lrtMACStaticConfigEntry 3 } sispm1040582lrtMACStaticConfigMACaddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address of the entry." ::= { sispm1040582lrtMACStaticConfigEntry 4 } sispm1040582lrtMACStaticConfigPortList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Checkmarks indicate which ports are members of the entry. Check or uncheck as needed to modify the entry." ::= { sispm1040582lrtMACStaticConfigEntry 5 } sispm1040582lrtMACStaticConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtMACStaticConfigEntry 6 } -- ======================================================================================================================= sispm1040582lrtSpanningTree OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 18 } sispm1040582lrtBridgeSettings OBJECT IDENTIFIER ::= { sispm1040582lrtSpanningTree 1 } sispm1040582lrtSTPProtocolVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:STP 2:RSTP 3:MSTP" ::= { sispm1040582lrtBridgeSettings 1 } sispm1040582lrtBridgePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Priority, range: 0-61440, multiple of 4096." ::= { sispm1040582lrtBridgeSettings 2 } sispm1040582lrtBridgeForwardDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Forward Delay, range: 4-30 seconds." ::= { sispm1040582lrtBridgeSettings 3 } sispm1040582lrtBridgeMaxAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge MaxAge, range:6-40 seconds." ::= { sispm1040582lrtBridgeSettings 4 } sispm1040582lrtBridgeMaxHops OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Max Hops, range:6-40 hops." ::= { sispm1040582lrtBridgeSettings 5 } sispm1040582lrtBridgetxHoldCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge Transmit Hold Count,range: 1-10 bpdu's per second. " ::= { sispm1040582lrtBridgeSettings 6 } sispm1040582lrtBridgeBPDUFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge BPD UFilter 0:disable 1:enable " ::= { sispm1040582lrtBridgeSettings 7 } sispm1040582lrtBridgeBPDUGuard OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge BPDU Guard 0:disable 1:enable " ::= { sispm1040582lrtBridgeSettings 8 } sispm1040582lrtBridgeerrorRecoveryDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Bridge error Recovery Delay range:30-86400 seconds 0:disable " ::= { sispm1040582lrtBridgeSettings 9 } sispm1040582lrtBridgeHelloTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between sending STP BPDU's. Valid values are in the range 1 to 10 seconds, default:2 seconds." ::= { sispm1040582lrtBridgeSettings 10 } sispm1040582lrtMSTIMapping OBJECT IDENTIFIER ::= { sispm1040582lrtSpanningTree 2 } sispm1040582lrtConfigName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration Name, identify the VLAN to MSTI mapping" ::= { sispm1040582lrtMSTIMapping 1 } sispm1040582lrtConfigRevision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration Revision. range:0-65535 " ::= { sispm1040582lrtMSTIMapping 2 } sispm1040582lrtMSTIMappingVLAN OBJECT IDENTIFIER ::= { sispm1040582lrtSpanningTree 3 } sispm1040582lrtConfigMstiName1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI1. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 1 } sispm1040582lrtConfigMstiName2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI2. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 2 } sispm1040582lrtConfigMstiName3 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI3. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 3 } sispm1040582lrtConfigMstiName4 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI4. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 4 } sispm1040582lrtConfigMstiName5 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI5. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 5 } sispm1040582lrtConfigMstiName6 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI6. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 6 } sispm1040582lrtConfigMstiName7 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The list of VLANs mapped to the MSTI7. The VLANs can be given as a single (xx, xx being between 1 and 4094) VLAN, or a range (xx-yy), each of which must be separated with comma and/or space. " ::= { sispm1040582lrtMSTIMappingVLAN 7 } sispm1040582lrtMSTIPriorities OBJECT IDENTIFIER ::= { sispm1040582lrtSpanningTree 4 } sispm1040582lrtCSTIPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "CSTI Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 1 } sispm1040582lrtMSTI1Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI1 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 2 } sispm1040582lrtMSTI2Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI2 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 3 } sispm1040582lrtMSTI3Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI3 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 4 } sispm1040582lrtMSTI4Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI4 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 5 } sispm1040582lrtMSTI5Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI5 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 6 } sispm1040582lrtMSTI6Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI6 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 7 } sispm1040582lrtMSTI7Priority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "MSTI7 Priority. range: 0-61440, multiple of 4096. Lower numeric values have better priority." ::= { sispm1040582lrtMSTIPriorities 8 } sispm1040582lrtCISTPorts OBJECT IDENTIFIER ::= { sispm1040582lrtSpanningTree 5 } sispm1040582lrtCISTAggregatedEnable OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Enable. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPorts 1 } sispm1040582lrtCISTAggregatedPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Path Cost. range: 0-200000000. 0 is Auto." ::= { sispm1040582lrtCISTPorts 2 } sispm1040582lrtCISTAggregatedPortPriority OBJECT-TYPE SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Priority. range: 0-240, multiple of 16." ::= { sispm1040582lrtCISTPorts 3 } sispm1040582lrtCISTAggregatedAdminEdge OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Admin Edge. range: 0-1. 0:Non-Edge 1:Edge." ::= { sispm1040582lrtCISTPorts 4 } sispm1040582lrtCISTAggregatedAutoEdge OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Auto Edge. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPorts 5 } sispm1040582lrtCISTAggregatedrestrictedRole OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port restricted Role. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPorts 6 } sispm1040582lrtCISTAggregatedrestrictedTcn OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port restricted Tcn. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPorts 7 } sispm1040582lrtCISTAggregatedbpduGuard OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port bpdu Guard. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPorts 8 } sispm1040582lrtCISTAggregatedPointToPoint OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Point To Point. range: 0-2. 0:Forced True 1:Forced False. 2:Auto" ::= { sispm1040582lrtCISTPorts 9 } sispm1040582lrtCISTPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTCISTPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIST port table." ::= { sispm1040582lrtCISTPorts 10 } sispm1040582lrtCISTPortsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTCISTPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the CIST Ports Table." INDEX { sispm1040582lrtCISTPortIndex } ::= { sispm1040582lrtCISTPortsTable 1 } SISPM1040582LRTCISTPortsEntry ::= SEQUENCE { sispm1040582lrtCISTPortIndex Integer32, sispm1040582lrtCISTPortEnable Integer32, sispm1040582lrtCISTPortPathCost Integer32, sispm1040582lrtCISTPortPortPriority Integer32, sispm1040582lrtCISTPortAdminEdge Integer32, sispm1040582lrtCISTPortAutoEdge Integer32, sispm1040582lrtCISTPortrestrictedRole Integer32, sispm1040582lrtCISTPortrestrictedTcn Integer32, sispm1040582lrtCISTPortbpduGuard Integer32, sispm1040582lrtCISTPortPointToPoint Integer32 } sispm1040582lrtCISTPortIndex OBJECT-TYPE SYNTAX Integer32 (1..53) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CIST Port Index. range: 1-53. 53 is Aggregated Port Configuration." ::= { sispm1040582lrtCISTPortsEntry 1 } sispm1040582lrtCISTPortEnable OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Enable. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPortsEntry 2 } sispm1040582lrtCISTPortPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Path Cost. range: 0-200000000. 0 is Auto." ::= { sispm1040582lrtCISTPortsEntry 3 } sispm1040582lrtCISTPortPortPriority OBJECT-TYPE SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Priority. range: 0-240, multiple of 16." ::= { sispm1040582lrtCISTPortsEntry 4 } sispm1040582lrtCISTPortAdminEdge OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Admin Edge. range: 0-1. 0:Non-Edge 1:Edge." ::= { sispm1040582lrtCISTPortsEntry 5 } sispm1040582lrtCISTPortAutoEdge OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Auto Edge. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPortsEntry 6 } sispm1040582lrtCISTPortrestrictedRole OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port restricted Role. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPortsEntry 7 } sispm1040582lrtCISTPortrestrictedTcn OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port restricted Tcn. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPortsEntry 8 } sispm1040582lrtCISTPortbpduGuard OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port bpdu Guard. range: 0-1. 0:disable 1:enable." ::= { sispm1040582lrtCISTPortsEntry 9 } sispm1040582lrtCISTPortPointToPoint OBJECT-TYPE SYNTAX Integer32 (0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "CIST Port Point To Point. range: 0-2. 0:Forced True 1:Forced False. 2:Auto" ::= { sispm1040582lrtCISTPortsEntry 10 } sispm1040582lrtMSTIPorts OBJECT IDENTIFIER ::= { sispm1040582lrtSpanningTree 6 } sispm1040582lrtMSTIAggregatedPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTMSTIAggregatedPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MSTI ports." ::= { sispm1040582lrtMSTIPorts 1 } sispm1040582lrtMSTIAggregatedPortsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTMSTIAggregatedPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MSTI ports Table." INDEX { sispm1040582lrtMSTIAggregatedPortsMSTIndex } ::= { sispm1040582lrtMSTIAggregatedPortsTable 1 } SISPM1040582LRTMSTIAggregatedPortsEntry ::= SEQUENCE { sispm1040582lrtMSTIAggregatedPortsMSTIndex Integer32, sispm1040582lrtMSTIAggregatedPortsPathCost Integer32, sispm1040582lrtMSTIAggregatedPortsPortPriority Integer32 } sispm1040582lrtMSTIAggregatedPortsMSTIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MST index, range:1-7" ::= {sispm1040582lrtMSTIAggregatedPortsEntry 1 } sispm1040582lrtMSTIAggregatedPortsPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "MST Path Cost. range: 0-200000000. 0 is Auto." ::= {sispm1040582lrtMSTIAggregatedPortsEntry 3 } sispm1040582lrtMSTIAggregatedPortsPortPriority OBJECT-TYPE SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) MAX-ACCESS read-write STATUS current DESCRIPTION "MST Port Priority. range: 0-240, multiple of 16." ::= {sispm1040582lrtMSTIAggregatedPortsEntry 4 } sispm1040582lrtMSTIPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTMSTIPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MSTI ports." ::= { sispm1040582lrtMSTIPorts 2 } sispm1040582lrtMSTIPortsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTMSTIPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MSTI ports Table." INDEX { sispm1040582lrtMSTIPortsMSTIndex, sispm1040582lrtMSTIPortsPortIndex } ::= { sispm1040582lrtMSTIPortsTable 1 } SISPM1040582LRTMSTIPortsEntry ::= SEQUENCE { sispm1040582lrtMSTIPortsMSTIndex Integer32, sispm1040582lrtMSTIPortsPortIndex Integer32, sispm1040582lrtMSTIPortsPathCost Integer32, sispm1040582lrtMSTIPortsPortPriority Integer32 } sispm1040582lrtMSTIPortsMSTIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MST index, range:1-7" ::= {sispm1040582lrtMSTIPortsEntry 1 } sispm1040582lrtMSTIPortsPortIndex OBJECT-TYPE SYNTAX Integer32 (1..53) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port index, range 1-53, 53 is Aggregated Ports Configuration." ::= {sispm1040582lrtMSTIPortsEntry 2 } sispm1040582lrtMSTIPortsPathCost OBJECT-TYPE SYNTAX Integer32 (0..200000000) MAX-ACCESS read-write STATUS current DESCRIPTION "MST Path Cost. range: 0-200000000. 0 is Auto." ::= {sispm1040582lrtMSTIPortsEntry 3 } sispm1040582lrtMSTIPortsPortPriority OBJECT-TYPE SYNTAX Integer32 (0|16|32|48|64|80|96|112|128|144|160|176|192|208|224|240) MAX-ACCESS read-write STATUS current DESCRIPTION "MST Port Priority. range: 0-240, multiple of 16." ::= {sispm1040582lrtMSTIPortsEntry 4 } -- ======================================================================================================================= sispm1040582lrtPrivateVLANs OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 19 } sispm1040582lrtPVLANMembershipTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPVLANMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Private VLAN Membership." ::= { sispm1040582lrtPrivateVLANs 1 } sispm1040582lrtPVLANMembershipEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPVLANMembershipEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the private VLAN table." INDEX { sispm1040582lrtPVLANMembershipIndex } ::= { sispm1040582lrtPVLANMembershipTable 1 } SISPM1040582LRTPVLANMembershipEntry ::= SEQUENCE { sispm1040582lrtPVLANMembershipIndex Integer32, sispm1040582lrtPVLANID Integer32, sispm1040582lrtPVLANMembers DisplayString, sispm1040582lrtPVLANRowStatus RowStatus } sispm1040582lrtPVLANMembershipIndex OBJECT-TYPE SYNTAX Integer32 (1..28) MAX-ACCESS not-accessible STATUS current DESCRIPTION "PVLAN membership index. Range:1-28." ::= {sispm1040582lrtPVLANMembershipEntry 1 } sispm1040582lrtPVLANID OBJECT-TYPE SYNTAX Integer32 (1..28) MAX-ACCESS read-create STATUS current DESCRIPTION "PVLAN ID. Range:1-28." ::= {sispm1040582lrtPVLANMembershipEntry 2 } sispm1040582lrtPVLANMembers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "PVLAN Members. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'." ::= {sispm1040582lrtPVLANMembershipEntry 3 } sispm1040582lrtPVLANRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "PVLAN Row Status." ::= {sispm1040582lrtPVLANMembershipEntry 4 } sispm1040582lrtPVLANPortIsolationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPVLANPortIsolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of Private VLAN Port Isolation." ::= { sispm1040582lrtPrivateVLANs 2 } sispm1040582lrtPVLANPortIsolationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPVLANPortIsolationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the private VLAN table." INDEX { sispm1040582lrtPVLANPortIsolationIndex } ::= { sispm1040582lrtPVLANPortIsolationTable 1 } SISPM1040582LRTPVLANPortIsolationEntry ::= SEQUENCE { sispm1040582lrtPVLANPortIsolationIndex Integer32, sispm1040582lrtPVLANPortIsolationPortMembers Integer32 } sispm1040582lrtPVLANPortIsolationIndex OBJECT-TYPE SYNTAX Integer32 (1..28) MAX-ACCESS not-accessible STATUS current DESCRIPTION "PVLAN Port Isolation Index. Range:1-28." ::= {sispm1040582lrtPVLANPortIsolationEntry 1 } sispm1040582lrtPVLANPortIsolationPortMembers OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "PVLAN Port Isolation Port Members enable/disable. Range:0-1. 1:Port Isolation enable on that port. 0:Port Isolation disable on that port." ::= {sispm1040582lrtPVLANPortIsolationEntry 2 } -- ======================================================================================================================= sispm1040582lrtsFlow OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 20 } sispm1040582lrtsFlowVersion OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: ;; where: must be '1.3', the version of this MIB. the name of the organization responsible for the agent implementation. the specific software build of this agent. As an example, the string '1.3;InMon Corp.;2.1.1' indicates that this agent implements version '1.2' of the SFLOW MIB, that it was developed by 'InMon Corp.' and that the software build is '2.1.1'. The MIB Version will change with each revision of the SFLOW MIB. Management entities must check the MIB Version and not attempt to manage agents with MIB Versions greater than that for which they were designed. Note: The sFlow Datagram Format has an independent version number which may change independently from . applies to the structure and semantics of the SFLOW MIB only." DEFVAL { "1.3;;" } ::= { sispm1040582lrtsFlow 1 } sispm1040582lrtsFlowAgentAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the address associated with this agent. Only ipv4 and ipv6 types are supported. ipv4:1, ipv6:2." ::= { sispm1040582lrtsFlow 2 } sispm1040582lrtsFlowAgentAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address associated with this agent. In the case of a multi-homed agent, this should be the loopback address of the agent. The sFlowAgent address must provide SNMP connectivity to the agent. The address should be an invariant that does not change as interfaces are reconfigured, enabled, disabled, added or removed. A manager should be able to use the sFlowAgentAddress as a unique key that will identify this agent over extended periods of time so that a history can be maintained." ::= { sispm1040582lrtsFlow 3 } -- -- Receiver Table -- sispm1040582lrtsFlowRcvrTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSFlowRcvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the receivers of sFlow information." ::= { sispm1040582lrtsFlow 4 } sispm1040582lrtsFlowRcvrEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSFlowRcvrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes of an sFlow Receiver." INDEX { sispm1040582lrtsFlowRcvrIndex } ::= { sispm1040582lrtsFlowRcvrTable 1 } SISPM1040582LRTSFlowRcvrEntry ::= SEQUENCE { sispm1040582lrtsFlowRcvrIndex Integer32, sispm1040582lrtsFlowRcvrOwner OwnerString, sispm1040582lrtsFlowRcvrTimeout Integer32, sispm1040582lrtsFlowRcvrMaximumDatagramSize Integer32, sispm1040582lrtsFlowRcvrAddressType InetAddressType, sispm1040582lrtsFlowRcvrAddress IpAddress, sispm1040582lrtsFlowRcvrPort Integer32, sispm1040582lrtsFlowRcvrDatagramVersion Integer32 } sispm1040582lrtsFlowRcvrIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index into sFlowReceiverTable." ::= { sispm1040582lrtsFlowRcvrEntry 1 } sispm1040582lrtsFlowRcvrOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-write STATUS current DESCRIPTION "The entity making use of this sFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before trying to claim it. The entry is claimed by setting the owner string. The entry must be claimed before any changes can be made to other sampler objects. In order to avoid a race condition, the entity taking control of the sampler must set both the owner and a value for sFlowRcvrTimeout in the same SNMP set request. When a management entity is finished using the sampler, it should set the value of sFlowRcvrOwner back to unclaimed. The agent must restore all other entities this row to their default values when the owner is set to unclaimed. It must also free all other resources associated with this sFlowRcvrTable entry. This mechanism provides no enforcement and relies on the cooperation of management entities in order to ensure that competition for a receiver entry is fairly resolved." DEFVAL { "" } ::= { sispm1040582lrtsFlowRcvrEntry 2 } sispm1040582lrtsFlowRcvrTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time (in seconds) remaining before the sampler is released and stops sampling. When set, the owner establishes control for the specified period. When read, the remaining time in the interval is returned. A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one expires. When the interval expires, the agent is responsible for restoring all other entities in this row to their default values. It must also free all other resources associated with this sFlowRcvrTable entry." DEFVAL { 0 } ::= { sispm1040582lrtsFlowRcvrEntry 3 } sispm1040582lrtsFlowRcvrMaximumDatagramSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of data bytes that can be sent in a single sample datagram. The manager should set this value to avoid fragmentation of the sFlow datagrams." DEFVAL { 1400 } ::= { sispm1040582lrtsFlowRcvrEntry 4 } sispm1040582lrtsFlowRcvrAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of sFlowRcvrCollectorAddress." DEFVAL { ipv4 } ::= { sispm1040582lrtsFlowRcvrEntry 5 } sispm1040582lrtsFlowRcvrAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the sFlow collector. If set to 0.0.0.0 not sFlow datagrams will be sent." DEFVAL { '00000000'h } -- 0.0.0.0 ::= { sispm1040582lrtsFlowRcvrEntry 6 } sispm1040582lrtsFlowRcvrPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port for sFlow datagrams." DEFVAL { 6343 } ::= { sispm1040582lrtsFlowRcvrEntry 7 } sispm1040582lrtsFlowRcvrDatagramVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The version of sFlow datagrams that should be sent. When set to a value not support by the agent, the agent should adjust the value to the highest supported value less than the requested value, or return an SNMP bad value error if no such value exists." DEFVAL { 5 } ::= { sispm1040582lrtsFlowRcvrEntry 8 } -- -- Flow Sampling Table -- sispm1040582lrtsFlowFsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSFlowFsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the flow samplers within a device." ::= { sispm1040582lrtsFlow 5 } sispm1040582lrtsFlowFsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSFlowFsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes of a flow sampler." INDEX { sispm1040582lrtsFlowFsDataSource, sispm1040582lrtsFlowFsInstance } ::= { sispm1040582lrtsFlowFsTable 1 } SISPM1040582LRTSFlowFsEntry ::= SEQUENCE { sispm1040582lrtsFlowFsDataSource Integer32, sispm1040582lrtsFlowFsInstance Integer32, sispm1040582lrtsFlowFsReceiver Integer32, sispm1040582lrtsFlowFsPacketSamplingRate Integer32, sispm1040582lrtsFlowFsMaximumHeaderSize Integer32, sispm1040582lrtsFlowFsType Integer32 } sispm1040582lrtsFlowFsDataSource OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "sFlowDataSource for this flow sampler." ::= { sispm1040582lrtsFlowFsEntry 1 } sispm1040582lrtsFlowFsInstance OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sFlow instance for this flow sampler." ::= { sispm1040582lrtsFlowFsEntry 2 } sispm1040582lrtsFlowFsReceiver OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The SFlowReceiver for this flow sampler." DEFVAL { 0 } ::= { sispm1040582lrtsFlowFsEntry 3 } sispm1040582lrtsFlowFsPacketSamplingRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The statistical sampling rate for packet sampling from this source. Set to N to sample 1/Nth of the packets in the monitored flows. An agent should choose its own algorithm to introduce variance into the sampling so that exactly every Nth packet is not counted. A sampling rate of 1 counts all packets. A sampling rate of 0 disables sampling. The agent is permitted to have minimum and maximum allowable values for the sampling rate. A minimum rate lets the agent designer set an upper bound on the overhead associated with sampling, and a maximum rate may be the result of hardware restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling rate (again because of implementation considerations). When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value. When read, the agent must return the actual sampling rate it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows." DEFVAL { 0 } ::= { sispm1040582lrtsFlowFsEntry 4 } sispm1040582lrtsFlowFsMaximumHeaderSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of bytes that should be copied from a sampled packet. The agent may have an internal maximum and minimum permissible sizes. If an attempt is made to set this value outside the permissible range then the agent should adjust the value to the closest permissible value." DEFVAL { 128 } ::= { sispm1040582lrtsFlowFsEntry 5 } sispm1040582lrtsFlowFsType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Flow Sample Type. 1:Rx 2:Tx 3:All." DEFVAL { 2 } ::= { sispm1040582lrtsFlowFsEntry 6 } -- -- Counter Polling Table -- sispm1040582lrtsFlowCpTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSFlowCpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the counter pollers within a device." ::= { sispm1040582lrtsFlow 6 } sispm1040582lrtsFlowCpEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSFlowCpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Attributes of a counter poller." INDEX { sispm1040582lrtsFlowCpDataSource, sispm1040582lrtsFlowCpInstance } ::= { sispm1040582lrtsFlowCpTable 1 } SISPM1040582LRTSFlowCpEntry ::= SEQUENCE { sispm1040582lrtsFlowCpDataSource Integer32, sispm1040582lrtsFlowCpInstance Integer32, sispm1040582lrtsFlowCpReceiver Integer32, sispm1040582lrtsFlowCpInterval Integer32 } sispm1040582lrtsFlowCpDataSource OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identifies the source of the data for the counter poller." ::= { sispm1040582lrtsFlowCpEntry 1 } sispm1040582lrtsFlowCpInstance OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sFlowInstance for this counter poller." ::= { sispm1040582lrtsFlowCpEntry 2 } sispm1040582lrtsFlowCpReceiver OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The SFlowReciever associated with this counter poller." DEFVAL { 0 } ::= { sispm1040582lrtsFlowCpEntry 3 } sispm1040582lrtsFlowCpInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of seconds between successive samples of the counters associated with this data source. A sampling interval of 0 disables counter sampling. The agent is permitted to have minimum and maximum allowable values for the counter polling interval. A minimum interval lets the agent designer set an upper bound on the overhead associated with polling, and a maximum interval may be the result of implementation restrictions (such as counter size). In addition not all values between the maximum and minimum may be realizable as the sampling interval (again because of implementation considerations). When the sampling rate is set the agent is free to adjust the value so that it lies between the maximum and minimum values and has the closest achievable value. When read, the agent must return the actual sampling interval it will be using (after the adjustments previously described). The sampling algorithm must converge so that over time the number of packets sampled approaches 1/Nth of the total number of packets in the monitored flows." DEFVAL { 0 } ::= { sispm1040582lrtsFlowCpEntry 4 } sispm1040582lrtLLDP OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 21 } sispm1040582lrtLLDPConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTLLDPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDP 1 } sispm1040582lrtLLDPConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTLLDPConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtLLDPIndex } ::= { sispm1040582lrtLLDPConfTable 1 } SISPM1040582LRTLLDPConfEntry ::= SEQUENCE { sispm1040582lrtLLDPIndex Integer32, sispm1040582lrtLLDPMode Integer32, sispm1040582lrtLLDPCDPAware Integer32, sispm1040582lrtLLDPPortDescr Integer32, sispm1040582lrtLLDPSysName Integer32, sispm1040582lrtLLDPSysDescr Integer32, sispm1040582lrtLLDPSysCapa Integer32, sispm1040582lrtLLDPMgmtAddr Integer32 } sispm1040582lrtLLDPIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "LLDP configuration index." ::= { sispm1040582lrtLLDPConfEntry 1 } sispm1040582lrtLLDPMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Tx only 2:Rx only 3:Enabled" ::= { sispm1040582lrtLLDPConfEntry 2 } sispm1040582lrtLLDPCDPAware OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPConfEntry 3 } sispm1040582lrtLLDPPortDescr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPConfEntry 4 } sispm1040582lrtLLDPSysName OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPConfEntry 5 } sispm1040582lrtLLDPSysDescr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPConfEntry 6 } sispm1040582lrtLLDPSysCapa OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPConfEntry 7 } sispm1040582lrtLLDPMgmtAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPConfEntry 8 } sispm1040582lrtLLDPMEDCoordinatesLocation OBJECT IDENTIFIER ::= { sispm1040582lrtLLDP 2 } sispm1040582lrtLLDPMEDLatitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Latitude SHOULD be normalized to within 0-90 degrees with a maximum of 4 digits." ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 2 } sispm1040582lrtLLDPMEDLatitudeDirection OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:North 1:South" ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 3 } sispm1040582lrtLLDPMEDLongitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Longitude SHOULD be normalized to within 0-180 degrees with a maximum of 4 digits." ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 4 } sispm1040582lrtLLDPMEDLongitudeDirection OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:East 1:West" ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 5 } sispm1040582lrtLLDPMEDAltitude OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Altitude SHOULD be normalized to within -2097151.9 to 2097151.9 with a maximum of 1 digits." ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 6 } sispm1040582lrtLLDPMEDAltitudeType OBJECT-TYPE SYNTAX Integer32(1|2) MAX-ACCESS read-write STATUS current DESCRIPTION "1:Meters 2:Floors" ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 7 } sispm1040582lrtLLDPMEDMapDatum OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "The Map Datum is used for the coordinates given in these options: 1:WGS84 2:NAD83/NAVD88 3:NAD83/MLLW " ::= { sispm1040582lrtLLDPMEDCoordinatesLocation 8 } sispm1040582lrtLLDPMEDTransmitTLVsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTLLDPMEDTransmitTLVsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDP 3 } sispm1040582lrtLLDPMEDTransmitTLVsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTLLDPMEDTransmitTLVsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtLLDPMEDTransmitTLVsPort } ::= { sispm1040582lrtLLDPMEDTransmitTLVsTable 1 } SISPM1040582LRTLLDPMEDTransmitTLVsEntry ::= SEQUENCE { sispm1040582lrtLLDPMEDTransmitTLVsPort Integer32, sispm1040582lrtLLDPMEDTransmitTLVsCapabilities Integer32, sispm1040582lrtLLDPMEDTransmitTLVsPolicies Integer32, sispm1040582lrtLLDPMEDTransmitTLVsLocation Integer32, sispm1040582lrtLLDPMEDTransmitTLVsPoE Integer32 } sispm1040582lrtLLDPMEDTransmitTLVsPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtLLDPMEDTransmitTLVsEntry 1 } sispm1040582lrtLLDPMEDTransmitTLVsCapabilities OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPMEDTransmitTLVsEntry 2 } sispm1040582lrtLLDPMEDTransmitTLVsPolicies OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPMEDTransmitTLVsEntry 3 } sispm1040582lrtLLDPMEDTransmitTLVsLocation OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPMEDTransmitTLVsEntry 4 } sispm1040582lrtLLDPMEDTransmitTLVsPoE OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPMEDTransmitTLVsEntry 5 } sispm1040582lrtLLDPMEDCivicAddressLocation OBJECT IDENTIFIER ::= { sispm1040582lrtLLDP 4 } sispm1040582lrtLLDPMEDCivicAddrLocatCountryCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 2 } sispm1040582lrtLLDPMEDCivicAddrLocatStateProvince OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 3 } sispm1040582lrtLLDPMEDCivicAddrLocatCounty OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 4 } sispm1040582lrtLLDPMEDCivicAddrLocatCity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 5 } sispm1040582lrtLLDPMEDCivicAddrLocatCityDistrict OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 6 } sispm1040582lrtLLDPMEDCivicAddrLocatBlockNeighborhood OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 7 } sispm1040582lrtLLDPMEDCivicAddrLocatStreet OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 8 } sispm1040582lrtLLDPMEDCivicAddrLocatLeadingStreetDirect OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 9 } sispm1040582lrtLLDPMEDCivicAddrLocatTrailingStreetSuffix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 10 } sispm1040582lrtLLDPMEDCivicAddrLocatStreetSuffix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 11 } sispm1040582lrtLLDPMEDCivicAddrLocatHouseNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 12 } sispm1040582lrtLLDPMEDCivicAddrLocatHouseNoSuffix OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 13 } sispm1040582lrtLLDPMEDCivicAddrLocatLandmark OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 14 } sispm1040582lrtLLDPMEDCivicAddrLocatAdditionalLocatInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 15 } sispm1040582lrtLLDPMEDCivicAddrLocatName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 16 } sispm1040582lrtLLDPMEDCivicAddrLocatZipCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 17 } sispm1040582lrtLLDPMEDCivicAddrLocatBuilding OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 18 } sispm1040582lrtLLDPMEDCivicAddrLocatApartment OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 19 } sispm1040582lrtLLDPMEDCivicAddrLocatFloor OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 20 } sispm1040582lrtLLDPMEDCivicAddrLocatRoomNo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 21 } sispm1040582lrtLLDPMEDCivicAddrLocatPlaceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 22 } sispm1040582lrtLLDPMEDCivicAddrLocatPostalCommunityName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 23 } sispm1040582lrtLLDPMEDCivicAddrLocatPOBox OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 24 } sispm1040582lrtLLDPMEDCivicAddrLocatAdditionalCode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDCivicAddressLocation 25 } sispm1040582lrtLLDPMEDPoliciesTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTLLDPMEDPoliciesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDP 5 } sispm1040582lrtLLDPMEDPoliciesEntry OBJECT-TYPE SYNTAX SISPM1040582LRTLLDPMEDPoliciesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtLLDPMEDPoliciesIndex } ::= { sispm1040582lrtLLDPMEDPoliciesTable 1 } SISPM1040582LRTLLDPMEDPoliciesEntry ::= SEQUENCE { sispm1040582lrtLLDPMEDPoliciesIndex Integer32, sispm1040582lrtLLDPMEDPoliciesPolicyID Integer32, sispm1040582lrtLLDPMEDPoliciesApplicationType Integer32, sispm1040582lrtLLDPMEDPoliciesTag Integer32, sispm1040582lrtLLDPMEDPoliciesVLANID Integer32, sispm1040582lrtLLDPMEDPoliciesL2Priority Integer32, sispm1040582lrtLLDPMEDPoliciesDSCP Integer32, sispm1040582lrtLLDPMEDPoliciesRowStatus RowStatus } sispm1040582lrtLLDPMEDPoliciesIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtLLDPMEDPoliciesEntry 1 } sispm1040582lrtLLDPMEDPoliciesPolicyID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDPMEDPoliciesEntry 2 } sispm1040582lrtLLDPMEDPoliciesApplicationType OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "1:Voice 2:Voice Signalling 3:Guest Voice 4:Guest Voice Signalling 5:Softphone Voice 6:Video Conferencing 7:Streaming Video 8:Video Signalling" ::= { sispm1040582lrtLLDPMEDPoliciesEntry 3 } sispm1040582lrtLLDPMEDPoliciesTag OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:Untagged 1:Tagged" ::= { sispm1040582lrtLLDPMEDPoliciesEntry 4 } sispm1040582lrtLLDPMEDPoliciesVLANID OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Range:1-4095" ::= { sispm1040582lrtLLDPMEDPoliciesEntry 5 } sispm1040582lrtLLDPMEDPoliciesL2Priority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "Range:0-7" ::= { sispm1040582lrtLLDPMEDPoliciesEntry 6 } sispm1040582lrtLLDPMEDPoliciesDSCP OBJECT-TYPE SYNTAX Integer32 (0..63) MAX-ACCESS read-write STATUS current DESCRIPTION "Range:0-63" ::= { sispm1040582lrtLLDPMEDPoliciesEntry 7 } sispm1040582lrtLLDPMEDPoliciesRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status." ::= { sispm1040582lrtLLDPMEDPoliciesEntry 8 } sispm1040582lrtLLDPMEDPolicyPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTLLDPMEDPolicyPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDP 6 } sispm1040582lrtLLDPMEDPolicyPortConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTLLDPMEDPolicyPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtLLDPMEDPolicyPortConfPort } ::= { sispm1040582lrtLLDPMEDPolicyPortConfTable 1 } SISPM1040582LRTLLDPMEDPolicyPortConfEntry ::= SEQUENCE { sispm1040582lrtLLDPMEDPolicyPortConfPort Integer32, sispm1040582lrtLLDPMEDPolicyPortConf Integer32 } sispm1040582lrtLLDPMEDPolicyPortConfPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtLLDPMEDPolicyPortConfEntry 1 } sispm1040582lrtLLDPMEDPolicyPortConf OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "0:Disable 1:Enable" ::= { sispm1040582lrtLLDPMEDPolicyPortConfEntry 2 } sispm1040582lrtLLDPMEDFastStartRepeatCount OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Range:1-10" ::= { sispm1040582lrtLLDP 7 } sispm1040582lrtLLDPMEDEmergencyCallService OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtLLDP 8 } sispm1040582lrtUDLD OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 22 } sispm1040582lrtUDLDPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTUDLDPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLD 1 } sispm1040582lrtUDLDPortConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTUDLDPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtUDLDPort } ::= { sispm1040582lrtUDLDPortConfigTable 1 } SISPM1040582LRTUDLDPortConfigEntry ::= SEQUENCE { sispm1040582lrtUDLDPort Integer32, sispm1040582lrtUDLDPortMode Integer32, sispm1040582lrtUDLDPortMessageInterval Integer32 } sispm1040582lrtUDLDPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortConfigEntry 1 } sispm1040582lrtUDLDPortMode OBJECT-TYPE SYNTAX Integer32 (0|1|2) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: Normal 2: Aggressive" ::= { sispm1040582lrtUDLDPortConfigEntry 2 } sispm1040582lrtUDLDPortMessageInterval OBJECT-TYPE SYNTAX Integer32(7..90) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 7, range: 7-90" ::= { sispm1040582lrtUDLDPortConfigEntry 3 } sispm1040582lrtUDLDPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTUDLDPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLD 2 } sispm1040582lrtUDLDPortStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTUDLDPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtUDLDPortStatusPort } ::= { sispm1040582lrtUDLDPortStatusTable 1 } SISPM1040582LRTUDLDPortStatusEntry ::= SEQUENCE { sispm1040582lrtUDLDPortStatusPort Integer32, sispm1040582lrtUDLDStatusAdminState Integer32, sispm1040582lrtUDLDStatusDeviceIDLocal DisplayString, sispm1040582lrtUDLDStatusDeviceNameLocal DisplayString, sispm1040582lrtUDLDStatusBidirectionalState DisplayString } sispm1040582lrtUDLDPortStatusPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port index" ::= { sispm1040582lrtUDLDPortStatusEntry 1 } sispm1040582lrtUDLDStatusAdminState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtUDLDPortStatusEntry 2 } sispm1040582lrtUDLDStatusDeviceIDLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortStatusEntry 3 } sispm1040582lrtUDLDStatusDeviceNameLocal OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortStatusEntry 4 } sispm1040582lrtUDLDStatusBidirectionalState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortStatusEntry 5 } sispm1040582lrtUDLDStatusPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify port number for check neighbour status" ::= { sispm1040582lrtUDLD 3 } sispm1040582lrtUDLDPortNeighbourStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTUDLDPortNeighbourStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLD 4 } sispm1040582lrtUDLDPortNeighbourStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTUDLDPortNeighbourStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtUDLDNeighbourPort } ::= { sispm1040582lrtUDLDPortNeighbourStatusTable 1 } SISPM1040582LRTUDLDPortNeighbourStatusEntry ::= SEQUENCE { sispm1040582lrtUDLDNeighbourPort Integer32, sispm1040582lrtUDLDNeighbourStatusPort DisplayString, sispm1040582lrtUDLDNeighbourStatusDeviceId DisplayString, sispm1040582lrtUDLDNeighbourStatusLinkStatus DisplayString, sispm1040582lrtUDLDNeighbourStatusDeviceName DisplayString } sispm1040582lrtUDLDNeighbourPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtUDLDPortNeighbourStatusEntry 1 } sispm1040582lrtUDLDNeighbourStatusPort OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortNeighbourStatusEntry 2 } sispm1040582lrtUDLDNeighbourStatusDeviceId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortNeighbourStatusEntry 3 } sispm1040582lrtUDLDNeighbourStatusLinkStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortNeighbourStatusEntry 4 } sispm1040582lrtUDLDNeighbourStatusDeviceName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtUDLDPortNeighbourStatusEntry 5 } -- ======================================================================================================================= sispm1040582lrtEPS OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 23 } sispm1040582lrtEPSTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEPSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of EPS." ::= { sispm1040582lrtEPS 1 } sispm1040582lrtEPSEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEPSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { sispm1040582lrtEPSIndex } ::= { sispm1040582lrtEPSTable 1 } SISPM1040582LRTEPSEntry ::= SEQUENCE { sispm1040582lrtEPSIndex Integer32, sispm1040582lrtEpsID Integer32, sispm1040582lrtEpsDomain Integer32, sispm1040582lrtEpsArchitecture Integer32, sispm1040582lrtEpsWFlow Integer32, sispm1040582lrtEpsPFlow Integer32, sispm1040582lrtEpsWSFMEP Integer32, sispm1040582lrtEpsPSFMEP Integer32, sispm1040582lrtEpsAPSMEP Integer32, sispm1040582lrtEpsAlarm Integer32, sispm1040582lrtEpsRowStatus RowStatus } sispm1040582lrtEPSIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEPSEntry 1 } sispm1040582lrtEpsID OBJECT-TYPE SYNTAX Integer32 (1..100) MAX-ACCESS read-create STATUS current DESCRIPTION "EPS ID. Range:1-100." ::= {sispm1040582lrtEPSEntry 2 } sispm1040582lrtEpsDomain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "EPS Domain. Range:0. 0:Domain is Port" ::= {sispm1040582lrtEPSEntry 3 } sispm1040582lrtEpsArchitecture OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "EPS Architecture. Range:0-1. 0:Architecture is 1+1 1:Architecture is 1:1" ::= {sispm1040582lrtEPSEntry 4 } sispm1040582lrtEpsWFlow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The working flow for the EPS." ::= {sispm1040582lrtEPSEntry 5 } sispm1040582lrtEpsPFlow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The protecting flow for the EPS" ::= {sispm1040582lrtEPSEntry 6 } sispm1040582lrtEpsWSFMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The working Signal Fail reporting MEP." ::= {sispm1040582lrtEPSEntry 7 } sispm1040582lrtEpsPSFMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The protecting Signal Fail reporting MEP." ::= {sispm1040582lrtEPSEntry 8 } sispm1040582lrtEpsAPSMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The APS PDU handling MEP." ::= {sispm1040582lrtEPSEntry 9 } sispm1040582lrtEpsAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "There is an active alarm on the EPS." ::= {sispm1040582lrtEPSEntry 10 } sispm1040582lrtEpsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "EPS Row Status." ::= {sispm1040582lrtEPSEntry 11 } sispm1040582lrtEpsConfigInstanceEpsID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify EPS ID for table uesd." ::= {sispm1040582lrtEPS 2 } sispm1040582lrtEPSConfigInstanceEntry OBJECT IDENTIFIER ::= { sispm1040582lrtEPS 3 } sispm1040582lrtEpsConfigInstanceProtectionType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Range:0-1. 0:Unidirectional: EPS in the two ends can select traffic from different working/protecting flow. This is only possible in case of 1+1. 1:Bidirectional: EPS in the two ends is selecting traffic from the same working/protecting flow. This requires APS enabled. This is mandatory for 1:1" ::= { sispm1040582lrtEPSConfigInstanceEntry 2 } sispm1040582lrtEpsConfigInstanceAPS OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Range:0-1. 0:disable 1:enable The Automatic Protection Switching protocol can be enabled/disabled. This is mandatory for 1:1." ::= { sispm1040582lrtEPSConfigInstanceEntry 3 } sispm1040582lrtEpsConfigInstanceRevertive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Range:0-1. 0:disable 1:enable The revertive switching to working flow can be enabled/disabled. " ::= { sispm1040582lrtEPSConfigInstanceEntry 4 } sispm1040582lrtEpsConfigInstanceWTRTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Wait To Restore timing value to be used in revertive switching. Range is 1 to 720 seconds. " ::= { sispm1040582lrtEPSConfigInstanceEntry 5 } sispm1040582lrtEpsConfigInstanceHoldOffTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The timing value to be used to make persistent check on Signal Fail before switching. This is in 100 ms. and the max value is 100 (10 sec)." ::= { sispm1040582lrtEPSConfigInstanceEntry 6 } sispm1040582lrtEpsConfigInstanceCommand OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:None 1:Clear 2:Lock Out 3:Forced switch 4:Manual switch P 5:Manual switch W 6:Exercise 7:Freeze 8:Lock Out Local " ::= { sispm1040582lrtEPSConfigInstanceEntry 7 } sispm1040582lrtEpsStatusProtectionState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "EPS state according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 8 } sispm1040582lrtEpsStatusWorkingFlowState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "OK: State of working flow is ok SF: State of working flow is Signal Fail SD: State of working flow is Signal Degrade (for future use) " ::= { sispm1040582lrtEPSConfigInstanceEntry 9 } sispm1040582lrtEpsStatusProtectingFlowState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "OK: State of protecting flow is ok SF: State of protecting flow is Signal Fail SD: State of protecting flow is Signal Degrade (for future use) " ::= { sispm1040582lrtEPSConfigInstanceEntry 10 } sispm1040582lrtEpsStatusTransmittedApsRequest OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted APS according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 11 } sispm1040582lrtEpsStatusTransmittedApsReSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted APS according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 12 } sispm1040582lrtEpsStatusTransmittedApsBrSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted APS according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 13 } sispm1040582lrtEpsStatusReceivedApsRequest OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The received APS according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 14 } sispm1040582lrtEpsStatusReceivedApsReSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received APS according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 15 } sispm1040582lrtEpsStatusReceivedApsBrSignal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The received APS according to State Transition Tables in G.8031. " ::= { sispm1040582lrtEPSConfigInstanceEntry 16 } sispm1040582lrtEpsStatusArchitectureMismatch OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The architecture indicated in the received APS does not match the locally configured. " ::= { sispm1040582lrtEPSConfigInstanceEntry 17 } sispm1040582lrtEpsStatusAPSOnWorking OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "APS is received on the working flow. " ::= { sispm1040582lrtEPSConfigInstanceEntry 18 } sispm1040582lrtEpsStatusSwitchingIncomplete OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Traffic is not selected from the same flow instance in the two ends. " ::= { sispm1040582lrtEPSConfigInstanceEntry 19 } sispm1040582lrtEpsStatusNoApsReceived OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "APS PDU is not received from the other end. " ::= { sispm1040582lrtEPSConfigInstanceEntry 20 } -- ======================================================================================================================= sispm1040582lrtERPS OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 24 } sispm1040582lrtERPSTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTERPSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ERPS." ::= { sispm1040582lrtERPS 1 } sispm1040582lrtERPSEntry OBJECT-TYPE SYNTAX SISPM1040582LRTERPSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { sispm1040582lrtErpsIndex } ::= { sispm1040582lrtERPSTable 1 } SISPM1040582LRTERPSEntry ::= SEQUENCE { sispm1040582lrtErpsIndex Integer32, sispm1040582lrtErpsID Integer32, sispm1040582lrtErpsPort0 Integer32, sispm1040582lrtErpsPort1 Integer32, sispm1040582lrtErpsPort0APSMEP Integer32, sispm1040582lrtErpsPort1APSMEP Integer32, sispm1040582lrtErpsPort0SFMEP Integer32, sispm1040582lrtErpsPort1SFMEP Integer32, sispm1040582lrtErpsRingType Integer32, sispm1040582lrtErpsInterconnectedNode Integer32, sispm1040582lrtErpsVirtualChannel Integer32, sispm1040582lrtErpsMajorRingID Integer32, sispm1040582lrtErpsAlarm Integer32, sispm1040582lrtErpsRowStatus RowStatus } sispm1040582lrtErpsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtERPSEntry 1 } sispm1040582lrtErpsID OBJECT-TYPE SYNTAX Integer32 (1..64) MAX-ACCESS read-create STATUS current DESCRIPTION "ERPS ID. Range:1-64." ::= {sispm1040582lrtERPSEntry 2 } sispm1040582lrtErpsPort0 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This will create a Port 0 of the switch in the ring." ::= {sispm1040582lrtERPSEntry 3 } sispm1040582lrtErpsPort1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This will create Port 1 of the switch in the Ring. As interconnected sub-ring will have only one ring port, Port 1 is configured as 0 for interconnected sub-ring. 0 in this field indicates that no Port 1 is associated with this instance" ::= {sispm1040582lrtERPSEntry 4 } sispm1040582lrtErpsPort0APSMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Port 0 APS PDU handling MEP. Range: 1-100." ::= {sispm1040582lrtERPSEntry 5 } sispm1040582lrtErpsPort1APSMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Port 1 APS PDU handling MEP. Range: 1-100." ::= {sispm1040582lrtERPSEntry 6 } sispm1040582lrtErpsPort0SFMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Port 0 Signal Fail reporting MEP. Range: 1-100." ::= {sispm1040582lrtERPSEntry 7 } sispm1040582lrtErpsPort1SFMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Port 1 Signal Fail reporting MEP. Range: 1-100." ::= {sispm1040582lrtERPSEntry 8 } sispm1040582lrtErpsRingType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Type of Protecting ring. It can be either major ring or sub-ring. 0:Major 1:Sub" ::= {sispm1040582lrtERPSEntry 9 } sispm1040582lrtErpsInterconnectedNode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Interconnected Node indicates that the ring instance is interconnected. 0: not interconnected 1: interconnected" ::= {sispm1040582lrtERPSEntry 10 } sispm1040582lrtErpsVirtualChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "1: indicates it is a sub-ring with virtual channel. 0: indicates, sub-ring doesn't have virtual channel." ::= {sispm1040582lrtERPSEntry 11 } sispm1040582lrtErpsMajorRingID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Major ring group ID for the interconnected sub-ring. Range:1-64" ::= {sispm1040582lrtERPSEntry 12 } sispm1040582lrtErpsAlarm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "There is an active alarm on the ERPS." ::= {sispm1040582lrtERPSEntry 13 } sispm1040582lrtErpsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ERPS Row Status." ::= {sispm1040582lrtERPSEntry 14 } sispm1040582lrtErpsConfigInstanceErpsID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify ERPS ID for ERPSConfigInstanceEntry and ErpsConfigInstanceVLANConfigTable uesd." ::= {sispm1040582lrtERPS 2 } sispm1040582lrtERPSConfigInstanceEntry OBJECT IDENTIFIER ::= { sispm1040582lrtERPS 3 } sispm1040582lrtErpsConfigInstanceConfigured OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Down: This ERPS is only created and has not yet been configured - is not active. Up: This ERPS is configured - is active." ::= { sispm1040582lrtERPSConfigInstanceEntry 2 } sispm1040582lrtErpsConfigInstanceGuardTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds, with a default value of 500 ms. Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages." ::= { sispm1040582lrtERPSConfigInstanceEntry 3 } sispm1040582lrtErpsConfigInstanceWTRTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Wait To Restore timing value to be used in revertive switching. The period of the WTR time can be configured by the operator in 1 minute steps between 5 and 12 minutes with a default value of 5 minutes. " ::= { sispm1040582lrtERPSConfigInstanceEntry 4 } sispm1040582lrtErpsConfigInstanceHoldOffTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The timing value to be used to make persistent check on Signal Fail before switching. The range of the hold off timer is 0 to 10 seconds in steps of 100 ms " ::= { sispm1040582lrtERPSConfigInstanceEntry 5 } sispm1040582lrtErpsConfigInstanceVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "ERPS Protocol Version - v1 or v2 1:v1 2:v2" ::= { sispm1040582lrtERPSConfigInstanceEntry 6 } sispm1040582lrtErpsConfigInstanceRevertive OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1:Revertive mode 0:Non-Revertive mode" ::= { sispm1040582lrtERPSConfigInstanceEntry 7 } sispm1040582lrtErpsConfigInstanceRPLRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "It can be either RPL owner or RPL Neighbor. 0:None 1:RPL owner 2:RPL Neighbor Please set RPLPort first. " ::= { sispm1040582lrtERPSConfigInstanceEntry 8 } sispm1040582lrtErpsConfigInstanceRPLPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This allows to select the east port or west port as the RPL block. 0:None 1:Port0 2:Port1 Please set RPLRole after specify RPLPort. " ::= { sispm1040582lrtERPSConfigInstanceEntry 9 } sispm1040582lrtErpsConfigInstanceClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If the owner has to be changed, then the clear check box allows to clear the RPL owner for that ERPS ring. 0: no clear 1: clear " ::= { sispm1040582lrtERPSConfigInstanceEntry 10 } sispm1040582lrtErpsConfigInstanceTopologyChange OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1: indicates that the topology changes in the sub-ring are propagated in the major ring. 0: indicates that the topology changes in the sub-ring are not propagated in the major ring. " ::= { sispm1040582lrtERPSConfigInstanceEntry 11 } sispm1040582lrtErpsConfigInstanceCommand OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:None 1:Manual Switch 2:Forced Switch 3:Clear Please set InstancePort first. " ::= { sispm1040582lrtERPSConfigInstanceEntry 12 } sispm1040582lrtErpsConfigInstancePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:None 1:Port0 2:Port1 Please set InstanceCommand after specify InstancePort. " ::= { sispm1040582lrtERPSConfigInstanceEntry 13 } sispm1040582lrtErpsStatusProtectionState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ERPS state according to State Transition Tables in G.8032. " ::= { sispm1040582lrtERPSConfigInstanceEntry 14 } sispm1040582lrtErpsStatusPort0 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "OK: State of East port is ok SF: State of East port is Signal Fail " ::= { sispm1040582lrtERPSConfigInstanceEntry 15 } sispm1040582lrtErpsStatusPort1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "OK: State of West port is ok SF: State of West port is Signal Fail " ::= { sispm1040582lrtERPSConfigInstanceEntry 16 } sispm1040582lrtErpsStatusTransmitAPS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The transmitted APS according to State Transition Tables in G.8032. " ::= { sispm1040582lrtERPSConfigInstanceEntry 17 } sispm1040582lrtErpsStatusPort0ReceiveAPS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The received APS on Port 0 according to State Transition Tables in G.8032. " ::= { sispm1040582lrtERPSConfigInstanceEntry 18 } sispm1040582lrtErpsStatusPort1ReceiveAPS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The received APS on Port 1 according to State Transition Tables in G.8032. " ::= { sispm1040582lrtERPSConfigInstanceEntry 19 } sispm1040582lrtErpsStatusWTRRemaining OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Remaining WTR timeout in milliseconds. " ::= { sispm1040582lrtERPSConfigInstanceEntry 20 } sispm1040582lrtErpsStatusRPLUnblocked OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "APS is received on the working flow. " ::= { sispm1040582lrtERPSConfigInstanceEntry 21 } sispm1040582lrtErpsStatusNoAPSReceived OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RAPS PDU is not received from the other end. " ::= { sispm1040582lrtERPSConfigInstanceEntry 22 } sispm1040582lrtErpsStatusPort0BlockStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Block status for Port 0 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel. " ::= { sispm1040582lrtERPSConfigInstanceEntry 23 } sispm1040582lrtErpsStatusPort1BlockStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Block status for Port 1 (Both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel. " ::= { sispm1040582lrtERPSConfigInstanceEntry 24 } sispm1040582lrtErpsStatusFOPAlarm OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Failure of Protocol Defect(FOP) status: FOP is not detected FOP is detected " ::= { sispm1040582lrtERPSConfigInstanceEntry 25 } sispm1040582lrtErpsConfigInstanceVLANConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTErpsConfigInstanceVLANConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ERPS VLANConfig." ::= { sispm1040582lrtERPS 4 } sispm1040582lrtErpsConfigInstanceVLANConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTErpsConfigInstanceVLANConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { sispm1040582lrtErpsConfigInstanceVLANConfigIndex } ::= { sispm1040582lrtErpsConfigInstanceVLANConfigTable 1 } SISPM1040582LRTErpsConfigInstanceVLANConfigEntry ::= SEQUENCE { sispm1040582lrtErpsConfigInstanceVLANConfigIndex Integer32, sispm1040582lrtErpsConfigInstanceVLANConfigVLANID Integer32, sispm1040582lrtErpsConfigInstanceVLANConfigRowStatus RowStatus } sispm1040582lrtErpsConfigInstanceVLANConfigIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtErpsConfigInstanceVLANConfigEntry 1 } sispm1040582lrtErpsConfigInstanceVLANConfigVLANID OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "ERPS VLAN Config ID. Range:1-4095." ::= {sispm1040582lrtErpsConfigInstanceVLANConfigEntry 2 } sispm1040582lrtErpsConfigInstanceVLANConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ERPS VLAN Config Row Status." ::= {sispm1040582lrtErpsConfigInstanceVLANConfigEntry 3 } -- ======================================================================================================================= sispm1040582lrtVLANTranslation OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 25 } sispm1040582lrtVLANTranslationPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVLANTranslationPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VLANTranslationPort." ::= { sispm1040582lrtVLANTranslation 1 } sispm1040582lrtVLANTranslationPortEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVLANTranslationPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the VLANTranslationPort table." INDEX { sispm1040582lrtVLANTranslationPortIndex } ::= { sispm1040582lrtVLANTranslationPortTable 1 } SISPM1040582LRTVLANTranslationPortEntry ::= SEQUENCE { sispm1040582lrtVLANTranslationPortIndex Integer32, sispm1040582lrtVLANTranslationPortDefault Integer32, sispm1040582lrtVLANTranslationPortGroupID Integer32 } sispm1040582lrtVLANTranslationPortIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLANTranslationPort index." ::= {sispm1040582lrtVLANTranslationPortEntry 1 } sispm1040582lrtVLANTranslationPortDefault OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set the switch port to use the default VLAN Translation Group. 1:set 0:not set" ::= {sispm1040582lrtVLANTranslationPortEntry 2 } sispm1040582lrtVLANTranslationPortGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN Translation mappings are organized into Groups, identified by the Group ID." ::= {sispm1040582lrtVLANTranslationPortEntry 3 } sispm1040582lrtVLANTranslationMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTVLANTranslationMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of VLANTranslationMapping." ::= { sispm1040582lrtVLANTranslation 2 } sispm1040582lrtVLANTranslationMappingEntry OBJECT-TYPE SYNTAX SISPM1040582LRTVLANTranslationMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the VLANTranslationMapping table." INDEX { sispm1040582lrtVLANTranslationMappingIndex } ::= { sispm1040582lrtVLANTranslationMappingTable 1 } SISPM1040582LRTVLANTranslationMappingEntry ::= SEQUENCE { sispm1040582lrtVLANTranslationMappingIndex Integer32, sispm1040582lrtVLANTranslationMappingGroupID Integer32, sispm1040582lrtVLANTranslationMappingVID Integer32, sispm1040582lrtVLANTranslationMappingTVID Integer32, sispm1040582lrtVLANTranslationMappingRowStatus RowStatus } sispm1040582lrtVLANTranslationMappingIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLANTranslationMapping index." ::= {sispm1040582lrtVLANTranslationMappingEntry 1 } sispm1040582lrtVLANTranslationMappingGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN Translation mappings are organized into Groups, identified by the Group ID." ::= {sispm1040582lrtVLANTranslationMappingEntry 2 } sispm1040582lrtVLANTranslationMappingVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Range:1-4095" ::= {sispm1040582lrtVLANTranslationMappingEntry 3 } sispm1040582lrtVLANTranslationMappingTVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Range:1-4095" ::= {sispm1040582lrtVLANTranslationMappingEntry 4 } sispm1040582lrtVLANTranslationMappingRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "VLANTranslationMapping Row Status." ::= {sispm1040582lrtVLANTranslationMappingEntry 5 } sispm1040582lrtMEP OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 26 } sispm1040582lrtMEPTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTMEPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MEP." ::= { sispm1040582lrtMEP 1 } sispm1040582lrtMEPEntry OBJECT-TYPE SYNTAX SISPM1040582LRTMEPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MEP table." INDEX { sispm1040582lrtMEPIndex } ::= { sispm1040582lrtMEPTable 1 } SISPM1040582LRTMEPEntry ::= SEQUENCE { sispm1040582lrtMEPIndex Integer32, sispm1040582lrtMepInstance Integer32, sispm1040582lrtMepDomain Integer32, sispm1040582lrtMepMode Integer32, sispm1040582lrtMepDirection Integer32, sispm1040582lrtMepResidencePort Integer32, sispm1040582lrtMepLevel Integer32, sispm1040582lrtMepFlowInstance Integer32, sispm1040582lrtMepTaggedVID Integer32, sispm1040582lrtMepEPSInstance DisplayString, sispm1040582lrtMepThisMAC DisplayString, sispm1040582lrtMepAlarm DisplayString, sispm1040582lrtMepRowStatus RowStatus } sispm1040582lrtMEPIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "MEP Table index." ::= {sispm1040582lrtMEPEntry 1 } sispm1040582lrtMepInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 2 } sispm1040582lrtMepDomain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 3 } sispm1040582lrtMepMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 4 } sispm1040582lrtMepDirection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 5 } sispm1040582lrtMepResidencePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 6 } sispm1040582lrtMepLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 7 } sispm1040582lrtMepFlowInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 8 } sispm1040582lrtMepTaggedVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 9 } sispm1040582lrtMepEPSInstance OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 10 } sispm1040582lrtMepThisMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 11 } sispm1040582lrtMepAlarm OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMEPEntry 12 } sispm1040582lrtMepRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "MEP Row Status." ::= {sispm1040582lrtMEPEntry 13 } sispm1040582lrtMepInstanceID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify MEP Instance ID for the following item and table uesd." ::= {sispm1040582lrtMEP 2 } sispm1040582lrtMepInstanceConfEntry OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 3 } sispm1040582lrtMepInstanceConfLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 2 } sispm1040582lrtMepInstanceConfFormat OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 3 } sispm1040582lrtMepInstanceConfDomainName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 4 } sispm1040582lrtMepInstanceConfMEGid OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 5 } sispm1040582lrtMepInstanceConfMEPid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 6 } sispm1040582lrtMepInstanceConfTaggedVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 7 } sispm1040582lrtMepInstanceConfSyslog OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 8 } sispm1040582lrtMepInstanceConfcLevel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 9 } sispm1040582lrtMepInstanceConfcMEG OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 10 } sispm1040582lrtMepInstanceConfcMEP OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 11 } sispm1040582lrtMepInstanceConfcAIS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 12 } sispm1040582lrtMepInstanceConfcLCK OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 13 } sispm1040582lrtMepInstanceConfcLoop OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 14 } sispm1040582lrtMepInstanceConfcConfig OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 15 } sispm1040582lrtMepInstanceConfcDEG OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 16 } sispm1040582lrtMepInstanceConfcSSF OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 17 } sispm1040582lrtMepInstanceConfaBLK OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 18 } sispm1040582lrtMepInstanceConfaTSD OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 19 } sispm1040582lrtMepInstanceConfaTSF OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtMepInstanceConfEntry 20 } sispm1040582lrtPeerMepConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPeerMepConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of MEP." ::= { sispm1040582lrtMEP 4 } sispm1040582lrtPeerMepConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPeerMepConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { sispm1040582lrtPeerMepConfIndex } ::= { sispm1040582lrtPeerMepConfTable 1 } SISPM1040582LRTPeerMepConfEntry ::= SEQUENCE { sispm1040582lrtPeerMepConfIndex Integer32, sispm1040582lrtPeerMepConfPeerMEPID Integer32, sispm1040582lrtPeerMepConfUnicastPeerMAC DisplayString, sispm1040582lrtPeerMepConfcLOC DisplayString, sispm1040582lrtPeerMepConfcRDI DisplayString, sispm1040582lrtPeerMepConfcPeriod DisplayString, sispm1040582lrtPeerMepConfcPriority DisplayString, sispm1040582lrtPeerMepConfRowStatus RowStatus } sispm1040582lrtPeerMepConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtPeerMepConfEntry 1 } sispm1040582lrtPeerMepConfPeerMEPID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Peer MEP ID" ::= {sispm1040582lrtPeerMepConfEntry 2 } sispm1040582lrtPeerMepConfUnicastPeerMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtPeerMepConfEntry 3 } sispm1040582lrtPeerMepConfcLOC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtPeerMepConfEntry 4 } sispm1040582lrtPeerMepConfcRDI OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtPeerMepConfEntry 5 } sispm1040582lrtPeerMepConfcPeriod OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtPeerMepConfEntry 6 } sispm1040582lrtPeerMepConfcPriority OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "" ::= {sispm1040582lrtPeerMepConfEntry 7 } sispm1040582lrtPeerMepConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Peer Mep Conf Row Status." ::= {sispm1040582lrtPeerMepConfEntry 8 } sispm1040582lrtFunctionalConf OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 5 } sispm1040582lrtFunctionalConfContinuityCheckEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= {sispm1040582lrtFunctionalConf 2 } sispm1040582lrtFunctionalConfContinuityCheckPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-7" ::= {sispm1040582lrtFunctionalConf 3 } sispm1040582lrtFunctionalConfContinuityCheckFrameRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:1-7 1: 300 f/sec 2: 100 f/sec 3: 10 f/sec 4: 1 f/sec 5: 6 f/min 6: 1 f/min 7: 6 f/hour" ::= {sispm1040582lrtFunctionalConf 4 } sispm1040582lrtFunctionalConfContinuityCheckTLV OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= {sispm1040582lrtFunctionalConf 5 } sispm1040582lrtFunctionalConfAPSProtocolEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= {sispm1040582lrtFunctionalConf 6 } sispm1040582lrtFunctionalConfAPSProtocolPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-7" ::= {sispm1040582lrtFunctionalConf 7 } sispm1040582lrtFunctionalConfAPSProtocolCast OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0: Unicast destination address 1: Multicast destination address" ::= {sispm1040582lrtFunctionalConf 8 } sispm1040582lrtFunctionalConfAPSProtocolType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "1: Linear protection APS 2: Ring protection APS" ::= {sispm1040582lrtFunctionalConf 9 } sispm1040582lrtFunctionalConfAPSProtocolLastOctet OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-255" ::= {sispm1040582lrtFunctionalConf 10 } sispm1040582lrtTLVConf OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 6 } sispm1040582lrtTLVConfOUIFirst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-255" ::= {sispm1040582lrtTLVConf 2 } sispm1040582lrtTLVConfOUISecond OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-255" ::= {sispm1040582lrtTLVConf 3 } sispm1040582lrtTLVConfOUIThird OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-255" ::= {sispm1040582lrtTLVConf 4 } sispm1040582lrtTLVConfSubType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-255" ::= {sispm1040582lrtTLVConf 5 } sispm1040582lrtTLVConfValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-255" ::= {sispm1040582lrtTLVConf 6 } sispm1040582lrtTLVConfStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTTLVConfStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLV Conf State Table" ::= { sispm1040582lrtMEP 7 } sispm1040582lrtTLVConfStateEntry OBJECT-TYPE SYNTAX SISPM1040582LRTTLVConfStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "TLV Conf State Entry" INDEX { sispm1040582lrtTLVConfStateIndex } ::= { sispm1040582lrtTLVConfStateTable 1 } SISPM1040582LRTTLVConfStateEntry ::= SEQUENCE { sispm1040582lrtTLVConfStateIndex Integer32, sispm1040582lrtTLVConfStatePeerMEPID Integer32, sispm1040582lrtTLVConfStateCCOrganizationSpecificOUIFirst Integer32, sispm1040582lrtTLVConfStateCCOrganizationSpecificOUISecond Integer32, sispm1040582lrtTLVConfStateCCOrganizationSpecificOUIThird Integer32, sispm1040582lrtTLVConfStateCCOrganizationSpecificSubType Integer32, sispm1040582lrtTLVConfStateCCOrganizationSpecificValue Integer32, sispm1040582lrtTLVConfStateCCOrganizationSpecificLastRX DisplayString, sispm1040582lrtTLVConfStateCCPortStatusValue Integer32, sispm1040582lrtTLVConfStateCCPortStatusLastRX DisplayString, sispm1040582lrtTLVConfStateCCInterfaceStatusValue Integer32, sispm1040582lrtTLVConfStateCCInterfaceStatusLastRX DisplayString } sispm1040582lrtTLVConfStateIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtTLVConfStateEntry 1 } sispm1040582lrtTLVConfStatePeerMEPID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peer MEP ID" ::= { sispm1040582lrtTLVConfStateEntry 2 } sispm1040582lrtTLVConfStateCCOrganizationSpecificOUIFirst OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received first value in the OUI field." ::= { sispm1040582lrtTLVConfStateEntry 3 } sispm1040582lrtTLVConfStateCCOrganizationSpecificOUISecond OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received second value in the OS TLV OUI field." ::= { sispm1040582lrtTLVConfStateEntry 4 } sispm1040582lrtTLVConfStateCCOrganizationSpecificOUIThird OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received third value in the OS TLV OUI field." ::= { sispm1040582lrtTLVConfStateEntry 5 } sispm1040582lrtTLVConfStateCCOrganizationSpecificSubType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received value in the OS TLV Sub-Type field." ::= { sispm1040582lrtTLVConfStateEntry 6 } sispm1040582lrtTLVConfStateCCOrganizationSpecificValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received value in the OS TLV Value field." ::= { sispm1040582lrtTLVConfStateEntry 7 } sispm1040582lrtTLVConfStateCCOrganizationSpecificLastRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "OS TLV was received in the last received CCM PDU." ::= { sispm1040582lrtTLVConfStateEntry 8 } sispm1040582lrtTLVConfStateCCPortStatusValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received value in the PS TLV Value field." ::= { sispm1040582lrtTLVConfStateEntry 9 } sispm1040582lrtTLVConfStateCCPortStatusLastRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "PS TLV was received in the last received CCM PDU." ::= { sispm1040582lrtTLVConfStateEntry 10 } sispm1040582lrtTLVConfStateCCInterfaceStatusValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The last received value in the IS TLV Value field." ::= { sispm1040582lrtTLVConfStateEntry 11 } sispm1040582lrtTLVConfStateCCInterfaceStatusLastRX OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "IS TLV was received in the last received CCM PDU." ::= { sispm1040582lrtTLVConfStateEntry 12 } sispm1040582lrtLinkStateTracking OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtMEP 8 } sispm1040582lrtFaultManagement OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 9 } sispm1040582lrtFaultMgmtLoopBackConfEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtFaultManagement 2 } sispm1040582lrtFaultMgmtLoopBackConfDEI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtFaultManagement 3 } sispm1040582lrtFaultMgmtLoopBackConfPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-7" ::= { sispm1040582lrtFaultManagement 4 } sispm1040582lrtFaultMgmtLoopBackConfCast OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Unicast destination address 1:Multicast destination address" ::= { sispm1040582lrtFaultManagement 5 } sispm1040582lrtFaultMgmtLoopBackConfPeerMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is only used if the 'Unicast MAC' is configured to all zero. The LBM unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer." ::= { sispm1040582lrtFaultManagement 6 } sispm1040582lrtFaultMgmtLoopBackConfUnicastMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This is only used if NOT configured to all zero. This will be used as the LBM PDU unicast MAC. This is the only way to configure Loop Back to-wards a MIP. " ::= { sispm1040582lrtFaultManagement 7 } sispm1040582lrtFaultMgmtLoopBackConfToSend OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of LBM PDU to send in one loop test. The value 0 indicate infinite transmission (test behaviour). This is HW based LBM/LBR and Requires VOE." ::= { sispm1040582lrtFaultManagement 8 } sispm1040582lrtFaultMgmtLoopBackConfSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The LBM frame size." ::= { sispm1040582lrtFaultManagement 9 } sispm1040582lrtFaultMgmtLoopBackConfInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval between transmitting LBM PDU." ::= { sispm1040582lrtFaultManagement 10 } sispm1040582lrtFaultManagementState OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 10 } sispm1040582lrtFaultMgmtStateTransactionID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The transaction id of the first LBM transmitted. For each LBM transmitted the transaction id in the PDU is incremented." ::= { sispm1040582lrtFaultManagementState 1 } sispm1040582lrtFaultMgmtStateTransmitted OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LBM PDU transmitted." ::= { sispm1040582lrtFaultManagementState 2 } sispm1040582lrtFaultMgmtStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTFaultMgmtStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtFaultManagementState 3 } sispm1040582lrtFaultMgmtStateEntry OBJECT-TYPE SYNTAX SISPM1040582LRTFaultMgmtStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtFaultMgmtStateIndex } ::= { sispm1040582lrtFaultMgmtStateTable 1 } SISPM1040582LRTFaultMgmtStateEntry ::= SEQUENCE { sispm1040582lrtFaultMgmtStateIndex Integer32, sispm1040582lrtFaultMgmtStateReplyMAC DisplayString, sispm1040582lrtFaultMgmtStateReceived Integer32, sispm1040582lrtFaultMgmtStateOutOfOrder Integer32 } sispm1040582lrtFaultMgmtStateIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtFaultMgmtStateEntry 1 } sispm1040582lrtFaultMgmtStateReplyMAC OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC of the replying MEP/MIP. In case of multi-cast LBM, replies can be received from all peer MEP in the group. This MAC is not shown in case of 'To Send' == 0." ::= { sispm1040582lrtFaultMgmtStateEntry 2 } sispm1040582lrtFaultMgmtStateReceived OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LBR PDU received from this 'Reply MAC'." ::= { sispm1040582lrtFaultMgmtStateEntry 3 } sispm1040582lrtFaultMgmtStateOutOfOrder OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LBR PDU received from this 'Reply MAC' with incorrect 'Transaction ID'." ::= { sispm1040582lrtFaultMgmtStateEntry 4 } sispm1040582lrtFaultMgmtTestSignal OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 11 } sispm1040582lrtFaultMgmtTestSignalTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Test Signal based on transmitting TST PDU can be enabled/disabled. 0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtTestSignal 2 } sispm1040582lrtFaultMgmtTestSignalRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Test Signal based on transmitting TST PDU can be enabled/disabled. 0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtTestSignal 3 } sispm1040582lrtFaultMgmtTestSignalDEI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The DEI to be inserted as PCP bits in TAG (if any). 0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtTestSignal 4 } sispm1040582lrtFaultMgmtTestSignalPriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The priority to be inserted as PCP bits in TAG (if any). Range:0-7" ::= { sispm1040582lrtFaultMgmtTestSignal 5 } sispm1040582lrtFaultMgmtTestSignalPeerMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The TST frame destination MAC will be taken from the 'Unicast Peer MAC' configuration of this peer." ::= { sispm1040582lrtFaultMgmtTestSignal 6 } sispm1040582lrtFaultMgmtTestSignalRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The TST frame transmission bit rate - in Mega bits pr. second. Limit is 400 Mbps. This is the bit rate of a standard frame without any encapsulation. If 1 Mbps rate is selected in a EVC MEP, the added tag will give a higher bitrate on the wire." ::= { sispm1040582lrtFaultMgmtTestSignal 7 } sispm1040582lrtFaultMgmtTestSignalSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The TST frame size. This is entered as the wanted size (in bytes) of a un-tagged frame containing TST OAM PDU - including CRC (four bytes)." ::= { sispm1040582lrtFaultMgmtTestSignal 8 } sispm1040582lrtFaultMgmtTestSignalPattern OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The 'empty' TST PDU has the size of 12 bytes. In order to achieve the configured frame size a data TLV will be added with a pattern. 0:All Zero 1:All One 2:10101010" ::= { sispm1040582lrtFaultMgmtTestSignal 9 } sispm1040582lrtFaultMgmtTestSignalSequenceNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtTestSignal 10 } sispm1040582lrtFaultMgmtTestSignalState OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 12 } sispm1040582lrtFaultMgmtTestSignalStateTXFrameCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transmitted TST frames since last 'Clear'." ::= { sispm1040582lrtFaultMgmtTestSignalState 2 } sispm1040582lrtFaultMgmtTestSignalStateRXFrameCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received TST frames since last 'Clear'." ::= { sispm1040582lrtFaultMgmtTestSignalState 3 } sispm1040582lrtFaultMgmtTestSignalStateRXRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current received TST frame bit rate in Kbps. This is calculated on a 1 s. basis, starting when first TST frame is received after 'Clear'. The frame size used for this calculation is the first received after 'Clear'" ::= { sispm1040582lrtFaultMgmtTestSignalState 4 } sispm1040582lrtFaultMgmtTestSignalStateTestTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds passed since first TST frame received after last 'Clear'." ::= { sispm1040582lrtFaultMgmtTestSignalState 5 } sispm1040582lrtFaultMgmtTestSignalStateClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This will clear all Test Signal State. Transmission of TST frame will be restarted. Calculation of 'Rx frame count', 'RX rate' and 'Test time' will be started when receiving first TST frame." ::= { sispm1040582lrtFaultMgmtTestSignalState 6 } sispm1040582lrtFaultMgmtClientConfigFlow OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 13 } sispm1040582lrtFaultMgmtClientConfigFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTFaultMgmtClientConfigFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtFaultMgmtClientConfigFlow 1 } sispm1040582lrtFaultMgmtClientConfigFlowEntry OBJECT-TYPE SYNTAX SISPM1040582LRTFaultMgmtClientConfigFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtFaultMgmtClientConfigFlowIndex } ::= { sispm1040582lrtFaultMgmtClientConfigFlowTable 1 } SISPM1040582LRTFaultMgmtClientConfigFlowEntry ::= SEQUENCE { sispm1040582lrtFaultMgmtClientConfigFlowIndex Integer32, sispm1040582lrtFaultMgmtClientConfigFlowDomain Integer32, sispm1040582lrtFaultMgmtClientConfigFlowInstance Integer32, sispm1040582lrtFaultMgmtClientConfigFlowLevel Integer32, sispm1040582lrtFaultMgmtClientConfigFlowAISprio Integer32, sispm1040582lrtFaultMgmtClientConfigFlowLCKprio Integer32, sispm1040582lrtFaultMgmtClientConfigFlowRowStatus RowStatus } sispm1040582lrtFaultMgmtClientConfigFlowIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtFaultMgmtClientConfigFlowEntry 1 } sispm1040582lrtFaultMgmtClientConfigFlowDomain OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The domain of the client layer flow. Ranfew:0-6 0:Port 1:EVC 2:VLAN 3:MPLS_LINK 4:MPLS_TUNNEL 5:MPLS_PW 6:MPLS_LSP" ::= { sispm1040582lrtFaultMgmtClientConfigFlowEntry 2 } sispm1040582lrtFaultMgmtClientConfigFlowInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Client layer flow instance numbers." ::= { sispm1040582lrtFaultMgmtClientConfigFlowEntry 3 } sispm1040582lrtFaultMgmtClientConfigFlowLevel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Client layer level - AIS and LCK PDU transmitted in this client layer flow will be on this level." ::= { sispm1040582lrtFaultMgmtClientConfigFlowEntry 4 } sispm1040582lrtFaultMgmtClientConfigFlowAISprio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The priority to be used when transmitting AIS in each client flow. Priority resulting in highest possible PCP can be selected. Range:0-7. 255 indicate highest possible is requested" ::= { sispm1040582lrtFaultMgmtClientConfigFlowEntry 5 } sispm1040582lrtFaultMgmtClientConfigFlowLCKprio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The priority to be used when transmitting LCK in each client flow. Priority resulting in highest possible PCP can be selected. Range:0-7. 255 indicate highest possible is requested" ::= { sispm1040582lrtFaultMgmtClientConfigFlowEntry 6 } sispm1040582lrtFaultMgmtClientConfigFlowRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "FaultMgmtClientConfigFlow Row Status." ::= {sispm1040582lrtFaultMgmtClientConfigFlowEntry 7 } sispm1040582lrtFaultMgmtAISLOCK OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 14 } sispm1040582lrtFaultMgmtAISEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Insertion of AIS signal (AIS PDU transmission) in client layer flows, can be enable/disabled. 0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtAISLOCK 2 } sispm1040582lrtFaultMgmtAISFrameRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Selecting the frame rate of AIS PDU. This is the inverse of transmission period as described in Y.1731. 1: 300 frames per second 2: 100 frames per second 3: 10 frames per second 4: 1 frames per second 5: 6 frames per minute 6: 1 frames per minute 7: 6 frames per hour" ::= { sispm1040582lrtFaultMgmtAISLOCK 3 } sispm1040582lrtFaultMgmtAISProtection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Selecting this means that the first 3 AIS PDU is transmitted as fast as possible - in case of using this for protection in the end point. 0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtAISLOCK 4 } sispm1040582lrtFaultMgmtLOCKEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Insertion of LOCK signal (LCK PDU transmission) in client layer flows, can be enable/disabled. 0:disable 1:enable" ::= { sispm1040582lrtFaultMgmtAISLOCK 5 } sispm1040582lrtFaultMgmtLOCKFrameRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Selecting the frame rate of LCK PDU. This is the inverse of transmission period as described in Y.1731. 1: 300 frames per second 2: 100 frames per second 3: 10 frames per second 4: 1 frames per second 5: 6 frames per minute 6: 1 frames per minute 7: 6 frames per hour" ::= { sispm1040582lrtFaultMgmtAISLOCK 6 } sispm1040582lrtPerformanceMonitor OBJECT IDENTIFIER ::= { sispm1040582lrtMEP 15 } sispm1040582lrtDataSetEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " When enabled this MEP instance will contribute to the 'PM Data Set' gathered by the PM Session. 0:disable 1:enable" ::= { sispm1040582lrtPerformanceMonitor 2 } sispm1040582lrtLossMeasureEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Loss Measurement based on transmitting/receiving CCM or LMM/LMR PDU can be enabled/disabled - see 'Ended'. This is only valid with one Peer MEP configured. 0:disable 1:enable" ::= { sispm1040582lrtPerformanceMonitor 3 } sispm1040582lrtLossMeasurePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The priority to be inserted as PCP bits in TAG (if any). In case of enable of Continuity Check and Loss Measurement both implemented on SW based CCM, 'Priority' has to be the same. range:0-7" ::= { sispm1040582lrtPerformanceMonitor 4 } sispm1040582lrtLossMeasureFrameRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " 1: 300 frames per second 2: 100 frames per second 3: 10 frames per second 4: 1 frames per second 5: 6 frames per minute 6: 1 frames per minute 7: 6 frames per hour" ::= { sispm1040582lrtPerformanceMonitor 5 } sispm1040582lrtLossMeasureCast OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " 0: Unicast destination address 1: Multicast destination address " ::= { sispm1040582lrtPerformanceMonitor 6 } sispm1040582lrtLossMeasureEnded OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " 0: Single ended LM based on LMM/LMR or DM based on DMM/DMR 1: Dual ended LM based on CCM or DM based on 1DM " ::= { sispm1040582lrtPerformanceMonitor 7 } sispm1040582lrtLossMeasureFLRInterv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This is the interval in seconds where the Frame Loss Ratio is calculated. " ::= { sispm1040582lrtPerformanceMonitor 8 } sispm1040582lrtLossMeasureLossThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Far end loss threshold count is incremented if a loss measurement is above this threshold. " ::= { sispm1040582lrtPerformanceMonitor 9 } sispm1040582lrtLossMeasureStateTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformanceMonitor 10 } sispm1040582lrtLossMeasureStateRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformanceMonitor 11 } sispm1040582lrtLossMeasureStateNearEndLossCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated near end frame loss count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 12 } sispm1040582lrtLossMeasureStateFarEndLossCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated far end frame loss count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 13 } sispm1040582lrtLossMeasureStateNearEndLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The near end frame loss ratio calculated based on the near end frame loss count and far end frame transmitted - in the latest 'FLR Interval'. The result is given in percent. " ::= { sispm1040582lrtPerformanceMonitor 14 } sispm1040582lrtLossMeasureStateFarEndLossRatio OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The far end frame loss ratio calculated based on the far end frame loss count and near end frame transmitted - in the latest 'FLR Interval'. The result is given in percent. " ::= { sispm1040582lrtPerformanceMonitor 15 } sispm1040582lrtLossMeasureStateClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set of this check and save will clear the accumulated counters and restart ratio calculation. " ::= { sispm1040582lrtPerformanceMonitor 16 } sispm1040582lrtLossMeasureAvailEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable of loss measurement availability. 0:disable 1:enable " ::= { sispm1040582lrtPerformanceMonitor 17 } sispm1040582lrtLossMeasureAvailInterv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Availability interval - number of measurements with same availability in order to change availability state. " ::= { sispm1040582lrtPerformanceMonitor 18 } sispm1040582lrtLossMeasureAvailFLRThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Availability frame loss ratio threshold in per mille. " ::= { sispm1040582lrtPerformanceMonitor 19 } sispm1040582lrtLossMeasureAvailMaintenance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable of loss measurement availability maintenance. " ::= { sispm1040582lrtPerformanceMonitor 20 } sispm1040582lrtLossMeasureAvailStateNearAvailCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end availability count. " ::= { sispm1040582lrtPerformanceMonitor 21 } sispm1040582lrtLossMeasureAvailStateFarAvailCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end availability count. " ::= { sispm1040582lrtPerformanceMonitor 22 } sispm1040582lrtLossMeasureAvailStateNearUnavailCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end unavailability count. " ::= { sispm1040582lrtPerformanceMonitor 23 } sispm1040582lrtLossMeasureAvailStateFarUnavailCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end unavailability count. " ::= { sispm1040582lrtPerformanceMonitor 24 } sispm1040582lrtLossMeasureAvailStateNearState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end availability state. " ::= { sispm1040582lrtPerformanceMonitor 25 } sispm1040582lrtLossMeasureAvailStateFarState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end availability state. " ::= { sispm1040582lrtPerformanceMonitor 26 } sispm1040582lrtLossMeasureHighLossIntervEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable of loss measurement high loss interval. 0:disable 1:enable " ::= { sispm1040582lrtPerformanceMonitor 27 } sispm1040582lrtLossMeasureHighLossIntervFLRThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "High Loss Interval frame loss ratio threshold in per mille. " ::= { sispm1040582lrtPerformanceMonitor 28 } sispm1040582lrtLossMeasureHighLossIntervConsecInterv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "High Loss Interval consecutive interval (number of measurements). " ::= { sispm1040582lrtPerformanceMonitor 29 } sispm1040582lrtLossMeasureHighLossIntervStateNearCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold. " ::= { sispm1040582lrtPerformanceMonitor 30 } sispm1040582lrtLossMeasureHighLossIntervStateFarCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end high loss interval count (number of measurements where availability state is available and FLR is above high loss interval FLR threshold. " ::= { sispm1040582lrtPerformanceMonitor 31 } sispm1040582lrtLossMeasureHighLossIntervStateNearConsecCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Near end high loss interval consecutive count. " ::= { sispm1040582lrtPerformanceMonitor 32 } sispm1040582lrtLossMeasureHighLossIntervStateFarConsecCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Far end high loss interval consecutive count. " ::= { sispm1040582lrtPerformanceMonitor 33 } sispm1040582lrtLossMeasureSignalDegradeEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable of loss measurement signal degrade. 0:disable 1:enable " ::= { sispm1040582lrtPerformanceMonitor 34 } sispm1040582lrtLossMeasureSignalDegradeTXMinimum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Minimum number of frames that must be transmitted in a measurement before frame loss ratio is tested against loss ratio threshold. " ::= { sispm1040582lrtPerformanceMonitor 35 } sispm1040582lrtLossMeasureSignalDegradeFLRThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Signal Degraded frame loss ratio threshold in per mille. " ::= { sispm1040582lrtPerformanceMonitor 36 } sispm1040582lrtLossMeasureSignalDegradeBadThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive bad interval measurements required to set degrade state. " ::= { sispm1040582lrtPerformanceMonitor 37 } sispm1040582lrtLossMeasureSignalDegradeGoodThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Number of consecutive good interval measurements required to clear degrade state. " ::= { sispm1040582lrtPerformanceMonitor 38 } sispm1040582lrtDelayMeasureEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Delay Measurement based on transmitting 1DM/DMM PDU can be enabled/disabled. Delay Measurement based on receiving and handling 1DM/DMR PDU is always enabled. 0:disable 1:enable " ::= { sispm1040582lrtPerformanceMonitor 39 } sispm1040582lrtDelayMeasurePriority OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The priority to be inserted as PCP bits in TAG (if any). Range:0-7 " ::= { sispm1040582lrtPerformanceMonitor 40 } sispm1040582lrtDelayMeasureCast OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Selection of 1DM/DMM PDU transmitted unicast or multicast. The unicast MAC will be configured through 'Peer MEP'. 0: Unicast destination address 1: Multicast destination address " ::= { sispm1040582lrtPerformanceMonitor 41 } sispm1040582lrtDelayMeasurePeerMEP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is only used if the 'Cast' is configured to Uni. The 1DM/DMR unicast MAC will be taken from the 'Unicast Peer MAC' configuration of this peer. " ::= { sispm1040582lrtPerformanceMonitor 42 } sispm1040582lrtDelayMeasureEnded OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:One-Way: One-Way Delay Measurement implemented on 1DM. 1:Two-Way: Two-Way Delay Measurement implemented on DMM/DMR. " ::= { sispm1040582lrtPerformanceMonitor 43 } sispm1040582lrtDelayMeasureTxMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Standardize: Y.1731 standardize way to transmit 1DM/DMR. 1:Proprietary: Vitesse proprietary way with follow-up packets to transmit 1DM/DMR. " ::= { sispm1040582lrtPerformanceMonitor 44 } sispm1040582lrtDelayMeasureCalc OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This is only used if the 'Way' is configured to Two-way. 0:Round trip: The frame delay calculated by the transmitting and receiving timestamps of initiators. Frame Delay = RxTimeb-TxTimeStampf 1:Flow: The frame delay calculated by the transmitting and receiving timestamps of initiators and remotes. Frame Delay = (RxTimeb-TxTimeStampf)-(TxTimeStampb-RxTimeStampf) " ::= { sispm1040582lrtPerformanceMonitor 45 } sispm1040582lrtDelayMeasureGap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The gap between transmitting 1DM/DMM PDU in 10ms. The range is 10 to 65535. " ::= { sispm1040582lrtPerformanceMonitor 46 } sispm1040582lrtDelayMeasureCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of last records to calculate. The range is 10 to 2000. " ::= { sispm1040582lrtPerformanceMonitor 47 } sispm1040582lrtDelayMeasureUnit OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time resolution. 0:us 1:ns " ::= { sispm1040582lrtPerformanceMonitor 48 } sispm1040582lrtDelayMeasureD2forD1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable to use DMM/DMR packet to calculate one-way DM. 0:disable 1:enable " ::= { sispm1040582lrtPerformanceMonitor 49 } sispm1040582lrtDelayMeasureCounterOverflowAction OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The action to counter when overflow happens. 0: Keep:When internal total delay counter overflow, DM is disabled automatically 1: Reset:When internal total delay counter overflow, counter is reset and DM continues running " ::= { sispm1040582lrtPerformanceMonitor 50 } sispm1040582lrtDelayMeasureStateOnewayTx OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated transmit count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 51 } sispm1040582lrtDelayMeasureStateOnewayRx OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 52 } sispm1040582lrtDelayMeasureStateOnewayRxTimeout OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive timeout count for two-way only - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 53 } sispm1040582lrtDelayMeasureStateOnewayRxError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. " ::= { sispm1040582lrtPerformanceMonitor 54 } sispm1040582lrtDelayMeasureStateOnewayAvDelayTot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 55 } sispm1040582lrtDelayMeasureStateOnewayAvDelaylastN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 56 } sispm1040582lrtDelayMeasureStateOnewayDelayMin OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 57 } sispm1040582lrtDelayMeasureStateOnewayDelayMax OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 58 } sispm1040582lrtDelayMeasureStateOnewayAvDelayVarTot OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 59 } sispm1040582lrtDelayMeasureStateOnewayAvDelayVarlastN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay variation of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 60 } sispm1040582lrtDelayMeasureStateOnewayDelayVarMin OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 61 } sispm1040582lrtDelayMeasureStateOnewayDelayVarMax OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 62 } sispm1040582lrtDelayMeasureStateOnewayOverflow OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The number of counter overflow - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 63 } sispm1040582lrtDelayMeasureStateFtoNTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated transmit count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 64 } sispm1040582lrtDelayMeasureStateFtoNRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 65 } sispm1040582lrtDelayMeasureStateFtoNRxTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive timeout count for two-way only - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 66 } sispm1040582lrtDelayMeasureStateFtoNRxError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. " ::= { sispm1040582lrtPerformanceMonitor 67 } sispm1040582lrtDelayMeasureStateFtoNAvDelayTot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 68 } sispm1040582lrtDelayMeasureStateFtoNAvDelaylastN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 69 } sispm1040582lrtDelayMeasureStateFtoNDelayMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 70 } sispm1040582lrtDelayMeasureStateFtoNDelayMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 71 } sispm1040582lrtDelayMeasureStateFtoNAvDelayVarTot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 72 } sispm1040582lrtDelayMeasureStateFtoNAvDelayVarlastN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay variation of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 73 } sispm1040582lrtDelayMeasureStateFtoNDelayVarMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 74 } sispm1040582lrtDelayMeasureStateFtoNDelayVarMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 75 } sispm1040582lrtDelayMeasureStateFtoNOverflow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of counter overflow - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 76 } sispm1040582lrtDelayMeasureStateNtoFTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated transmit count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 77 } sispm1040582lrtDelayMeasureStateNtoFRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 78 } sispm1040582lrtDelayMeasureStateNtoFRxTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive timeout count for two-way only - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 79 } sispm1040582lrtDelayMeasureStateNtoFRxError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. " ::= { sispm1040582lrtPerformanceMonitor 80 } sispm1040582lrtDelayMeasureStateNtoFAvDelayTot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 81 } sispm1040582lrtDelayMeasureStateNtoFAvDelaylastN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 82 } sispm1040582lrtDelayMeasureStateNtoFDelayMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 83 } sispm1040582lrtDelayMeasureStateNtoFDelayMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 84 } sispm1040582lrtDelayMeasureStateNtoFAvDelayVarTot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 85 } sispm1040582lrtDelayMeasureStateNtoFAvDelayVarlastN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay variation of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 86 } sispm1040582lrtDelayMeasureStateNtoFDelayVarMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 87 } sispm1040582lrtDelayMeasureStateNtoFDelayVarMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 88 } sispm1040582lrtDelayMeasureStateNtoFOverflow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of counter overflow - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 89 } sispm1040582lrtDelayMeasureStateTwowayTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated transmit count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 90 } sispm1040582lrtDelayMeasureStateTwowayRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive count - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 91 } sispm1040582lrtDelayMeasureStateTwowayRxTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive timeout count for two-way only - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 92 } sispm1040582lrtDelayMeasureStateTwowayRxError OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The accumulated receive error count - since last 'clear'. This is counting if the frame delay is larger than 1 second or if far end residence time is larger than the round trip time. " ::= { sispm1040582lrtPerformanceMonitor 93 } sispm1040582lrtDelayMeasureStateTwowayAvDelayTot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 94 } sispm1040582lrtDelayMeasureStateTwowayAvDelaylastN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 95 } sispm1040582lrtDelayMeasureStateTwowayDelayMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 96 } sispm1040582lrtDelayMeasureStateTwowayDelayMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 97 } sispm1040582lrtDelayMeasureStateTwowayAvDelayVarTot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average total delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 98 } sispm1040582lrtDelayMeasureStateTwowayAvDelayVarlastN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average delay variation of the last n packets - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 99 } sispm1040582lrtDelayMeasureStateTwowayDelayVarMin OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 100 } sispm1040582lrtDelayMeasureStateTwowayDelayVarMax OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum delay variation - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 101 } sispm1040582lrtDelayMeasureStateTwowayOverflow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of counter overflow - since last 'clear'. " ::= { sispm1040582lrtPerformanceMonitor 102 } sispm1040582lrtDelayMeasureStateClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set of this check and save will clear the accumulated counters. 1:clear " ::= { sispm1040582lrtPerformanceMonitor 103 } sispm1040582lrtDelayMeasureBinsMeasureBinsforFD OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable number of Frame Delay Measurement Bins per Measurement Interval. range: 2-10 " ::= { sispm1040582lrtPerformanceMonitor 104 } sispm1040582lrtDelayMeasureBinsMeasureBinsforIFDV OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable number of Inter-Frame Delay Variation Measurement Bins per Measurement Interval. range: 2-10 " ::= { sispm1040582lrtPerformanceMonitor 105 } sispm1040582lrtDelayMeasureBinsMeasureThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable the Measurement Threshold for each Measurement Bin. " ::= { sispm1040582lrtPerformanceMonitor 106 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPerformMonitorDelayMeasureBinsforFDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtMEP 16 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPerformMonitorDelayMeasureBinsforFDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDIndex } ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDTable 1 } SISPM1040582LRTPerformMonitorDelayMeasureBinsforFDEntry ::= SEQUENCE { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDIndex Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforFDOneway Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforFDFtoN Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforFDNtoF Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforFDTwoway Integer32 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDEntry 1 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDOneway OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDEntry 2 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDFtoN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDEntry 3 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDNtoF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDEntry 4 } sispm1040582lrtPerformMonitorDelayMeasureBinsforFDTwoway OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforFDEntry 5 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPerformMonitorDelayMeasureBinsforIFDVEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtMEP 17 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPerformMonitorDelayMeasureBinsforIFDVEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVIndex } ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVTable 1 } SISPM1040582LRTPerformMonitorDelayMeasureBinsforIFDVEntry ::= SEQUENCE { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVIndex Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVOneway Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVFtoN Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVNtoF Integer32, sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVTwoway Integer32 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVEntry 1 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVOneway OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVEntry 2 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVFtoN OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVEntry 3 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVNtoF OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVEntry 4 } sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVTwoway OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPerformMonitorDelayMeasureBinsforIFDVEntry 5 } sispm1040582lrtRRING OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 27 } sispm1040582lrtRRINGTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTRRINGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtRRING 1 } sispm1040582lrtRRINGEntry OBJECT-TYPE SYNTAX SISPM1040582LRTRRINGEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtRRINGIndex } ::= { sispm1040582lrtRRINGTable 1 } SISPM1040582LRTRRINGEntry ::= SEQUENCE { sispm1040582lrtRRINGIndex Integer32, sispm1040582lrtRRINGRole Integer32, sispm1040582lrtRRINGPort1 Integer32, sispm1040582lrtRRINGPort2 Integer32, sispm1040582lrtRRINGStatus1 DisplayString, sispm1040582lrtRRINGStatus2 DisplayString } sispm1040582lrtRRINGIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtRRINGEntry 1 } sispm1040582lrtRRINGRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set role value. 0:Disabled 1:Master 2:Member 3:Rapid-Chain " ::= { sispm1040582lrtRRINGEntry 2 } sispm1040582lrtRRINGPort1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port number of the port1 . " ::= { sispm1040582lrtRRINGEntry 3 } sispm1040582lrtRRINGPort2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port number of the port2 . " ::= { sispm1040582lrtRRINGEntry 4 } sispm1040582lrtRRINGStatus1 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Rapid Ring status of the port1. " ::= { sispm1040582lrtRRINGEntry 5 } sispm1040582lrtRRINGStatus2 OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current Rapid Ring status of the port2. " ::= { sispm1040582lrtRRINGEntry 6 } sispm1040582lrtRINGtoRINGRole OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Set ring-to-ring role value. 0:Disabled 1:Active 2:Backup " ::= { sispm1040582lrtRRING 2 } sispm1040582lrtRINGtoRINGPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The switch port number of the ring-to-ring port. " ::= { sispm1040582lrtRRING 3 } sispm1040582lrtRINGtoRINGStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The current ring-to-ring status of the port." ::= { sispm1040582lrtRRING 4 } sispm1040582lrtPTP OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 28 } sispm1040582lrtPTPOnePPSMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to select the One_pps_mode configuration. The following values are possible: 0:Disable 1. Output 2. Input 3. Output Input " ::= { sispm1040582lrtPTP 1 } sispm1040582lrtPTPExternalEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the External Clock output. The following values are possible: 1. True : Enable the external clock output 0. False : Disable the external clock output " ::= { sispm1040582lrtPTP 2 } sispm1040582lrtPTPAdjustMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This Selection box will allow you to configure the Frequency adjustment configuration. 0: LTC frequency : Select Local Time Counter (LTC) frequency control 1: SyncE-DPLL : Select SyncE DPLL frequency control, if allowed by SyncE 2: Oscillator : Select an oscillator independent of SyncE for frequency control, if supported by the HW 3: LTC phase : Select Local Time Counter (LTC) phase control (assumes that the frequency is locked by means of SyncE) " ::= { sispm1040582lrtPTP 3 } sispm1040582lrtPTPClockFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This will allow to set the Clock Frequency. The possible range of values are 1 - 25000000 (1 - 25MHz) " ::= { sispm1040582lrtPTP 4 } sispm1040582lrtPTPClockConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPTPClockConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of PTP Clock Conf." ::= { sispm1040582lrtPTP 5 } sispm1040582lrtPTPClockConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPTPClockConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PTP Clock Conf table." INDEX { sispm1040582lrtPTPClockConfIndex } ::= { sispm1040582lrtPTPClockConfTable 1 } SISPM1040582LRTPTPClockConfEntry ::= SEQUENCE { sispm1040582lrtPTPClockConfIndex Integer32, sispm1040582lrtPTPClockConfClockInstance Integer32, sispm1040582lrtPTPClockConfDeviceType Integer32, sispm1040582lrtPTPClockConfProfile Integer32, sispm1040582lrtPTPClockConfRowStatus RowStatus } sispm1040582lrtPTPClockConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "PTP Clock Conf index." ::= {sispm1040582lrtPTPClockConfEntry 1 } sispm1040582lrtPTPClockConfClockInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Instance of a particular Clock Instance [0..3]." ::= {sispm1040582lrtPTPClockConfEntry 2 } sispm1040582lrtPTPClockConfDeviceType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the Type of the Clock Instance. There are five Device Types. 0: Inactive - passive clock instance 1: Ord-Bound - clock's Device Type is Ordinary-Boundary Clock. 2: P2p Transp - clock's Device Type is Peer to Peer Transparent Clock. 3: E2e Transp - clock's Device Type is End to End Transparent Clock. 4: Master Only - clock's Device Type is Master Only. 5: Slave Only - clock's Device Type is Slave Only. 6: Boundary Clock frontend clock instance, only 1-step, 1-way is supported." ::= {sispm1040582lrtPTPClockConfEntry 3 } sispm1040582lrtPTPClockConfProfile OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "0:No profile 1:1588 2:G8265.1 3:G8275.1 " ::= {sispm1040582lrtPTPClockConfEntry 4 } sispm1040582lrtPTPClockConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "PTP Clock Conf Row Status." ::= {sispm1040582lrtPTPClockConfEntry 5 } sispm1040582lrtPTPClockInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the PTP clock instance for the following item used [0..3]." ::= {sispm1040582lrtPTP 6 } sispm1040582lrtPTPClkConfAndStatus OBJECT IDENTIFIER ::= { sispm1040582lrtPTP 7 } sispm1040582lrtPTPClkConfEntClkInstance OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtPTPClkConfAndStatus 2 } sispm1040582lrtPTPClkConfEntDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtPTPClkConfAndStatus 3 } sispm1040582lrtPTPClkConfEntProfile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= {sispm1040582lrtPTPClkConfAndStatus 4 } sispm1040582lrtPTPClkConfEntApplyProfileDefaults OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "-1:n/a 0:normal state 1:apply profile default" ::= {sispm1040582lrtPTPClkConfAndStatus 5 } sispm1040582lrtPTPClkConfEntPTPTime OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the actual PTP time with nanosecond resolution." ::= {sispm1040582lrtPTPClkConfAndStatus 6 } sispm1040582lrtPTPClkConfEntClkAdjustmentMethod OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the actual clock adjustment method. The method depends on the available hardware." ::= {sispm1040582lrtPTPClkConfAndStatus 7 } sispm1040582lrtPTPClkConfEntSynchronizeToSystemClk OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Activate this button to synchronize the System Clock to PTP Time. 1:Synchronize to system clock." ::= {sispm1040582lrtPTPClkConfAndStatus 8 } sispm1040582lrtPTPClkConfEntClkCurDataSetstpRm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Steps Removed : It is the number of PTP clocks traversed from the grandmaster to the local slave clock." ::= {sispm1040582lrtPTPClkConfAndStatus 9 } sispm1040582lrtPTPClkConfEntClkCurDataSetOffsetFromMaster OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Time difference between the master clock and the local slave clock, measured in ns." ::= {sispm1040582lrtPTPClkConfAndStatus 10 } sispm1040582lrtPTPClkConfEntClkCurDataSetMeanPathDelay OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The mean propagation time for the link between the master and the local slave." ::= {sispm1040582lrtPTPClkConfAndStatus 11 } sispm1040582lrtPTPClkConfEntClkCurDataSetSlavePort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows which port is in slave mode. The value is 0 if no ports are in slave mode." ::= {sispm1040582lrtPTPClkConfAndStatus 12 } sispm1040582lrtPTPClkConfEntClkCurDataSetSlaveState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Shows synchronization state of the slave." ::= {sispm1040582lrtPTPClkConfAndStatus 13 } sispm1040582lrtPTPClkConfEntClkCurDataSetHoldover OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "After the slave has been in Locked mode during the stabilization period, this value shows the actual clock offset between the freerun and the actual holdover frequency, the value is shown in parts pr billion (ppb). During the stabilization period, the value is shown as N.A. The stabilization period is 60 sec as default, it can be changed from the CLI interface." ::= {sispm1040582lrtPTPClkConfAndStatus 14 } sispm1040582lrtPTPClkConfEntClkParentDataSetParentPortID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Clock identity for the parent clock, if the local clock is not a slave, the value is the clocks own id." ::= {sispm1040582lrtPTPClkConfAndStatus 15 } sispm1040582lrtPTPClkConfEntClkParentDataSetPort OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Port Id for the parent master port" ::= {sispm1040582lrtPTPClkConfAndStatus 16 } sispm1040582lrtPTPClkConfEntClkParentDataSetPStat OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Parents Stats (always false)." ::= {sispm1040582lrtPTPClkConfAndStatus 17 } sispm1040582lrtPTPClkConfEntClkParentDataSetVar OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "It is observed parent offset scaled log variance" ::= {sispm1040582lrtPTPClkConfAndStatus 18 } sispm1040582lrtPTPClkConfEntClkParentDataSetRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset compared to the master. (unit = ns per s)." ::= {sispm1040582lrtPTPClkConfAndStatus 19 } sispm1040582lrtPTPClkConfEntClkParentDataSetGrandMasterID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Clock identity for the grand master clock, if the local clock is not a slave, the value is the clocks own id." ::= {sispm1040582lrtPTPClkConfAndStatus 20 } sispm1040582lrtConfEntClkParentDataSetGrandMasterClkQuality OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The clock quality announced by the grand master (See description of Clock Default DataSet:Clock Quality)" ::= {sispm1040582lrtPTPClkConfAndStatus 21 } sispm1040582lrtPTPClkConfEntClkParentDataSetPri1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Clock priority 1 announced by the grand master" ::= {sispm1040582lrtPTPClkConfAndStatus 22 } sispm1040582lrtPTPClkConfEntClkParentDataSetPri2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Clock priority 2 announced by the grand master." ::= {sispm1040582lrtPTPClkConfAndStatus 23 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetClkID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "An internal instance id (0..3)" ::= {sispm1040582lrtPTPClkConfAndStatus 24 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the Type of the Clock Instance. There are five Device Types. 1. Ord-Bound - Clock's Device Type is Ordinary-Boundary Clock. 2. P2p Transp - Clock's Device Type is Peer to Peer Transparent Clock. 3. E2e Transp - Clock's Device Type is End to End Transparent Clock. 4. Master Only - Clock's Device Type is Master Only. 5. Slave Only - Clock's Device Type is Slave Only." ::= {sispm1040582lrtPTPClkConfAndStatus 25 } sispm1040582lrtPTPClkConfEntClkDefaultDataSet2StepFlag OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "True if two-step Sync events and Pdelay_Resp events are used 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 26 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetPorts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of physical ports in the node" ::= {sispm1040582lrtPTPClkConfAndStatus 27 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetClkIdentity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "It shows unique clock identifier" ::= {sispm1040582lrtPTPClkConfAndStatus 28 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetDom OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Clock domain [0..127]." ::= {sispm1040582lrtPTPClkConfAndStatus 29 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetClkQuality OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The clock quality is determined by the system, and holds 3 parts: Clock Class, Clock Accuracy and OffsetScaledLog Variance as defined in IEEE1588. The Clock Accuracy values are defined in IEEE1588 table 6 (Currently the clock Accuracy is set to 'Unknown' as default)." ::= {sispm1040582lrtPTPClkConfAndStatus 30 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetPri1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Clock priority 1 [0..255] used by the BMC master select algorithm." ::= {sispm1040582lrtPTPClkConfAndStatus 31 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetPri2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Clock priority 2 [0..255] used by the BMC master select algorithm." ::= {sispm1040582lrtPTPClkConfAndStatus 32 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetProtocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:Ethernet 1:Ethernet Mixed 2:IP4Multi 3:IP4Mixed 4:IP4Uni 5:OAM 6:OnePPS" ::= {sispm1040582lrtPTPClkConfAndStatus 33 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetOneWay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If true, one way measurements are used. This parameter applies only to a slave. In one-way mode no delay measurements are performed, i.e. this is applicable only if frequency synchronization is needed. The master always responds to delay requests. 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 34 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetVLANTagEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN Tag Enable parameter is ignored, because the tagging is controlled by the VLAN configuration. 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 35 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "TVLAN Identifier used for tagging the VLAN packets. range:1-4095" ::= {sispm1040582lrtPTPClkConfAndStatus 36 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetPCP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Priority Code Point value used for PTP frames. range:0-7" ::= {sispm1040582lrtPTPClkConfAndStatus 37 } sispm1040582lrtPTPClkConfEntClkDefaultDataSetDSCP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= {sispm1040582lrtPTPClkConfAndStatus 38 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetUtcOffset OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range: 0-10000" ::= {sispm1040582lrtPTPClkConfAndStatus 39 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetValid OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 40 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetLeap59 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 41 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetLeap61 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 42 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetTimeTrac OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 43 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetFreqTrac OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 44 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetPTPTimeScale OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 45 } sispm1040582lrtPTPClkConfEntClkTimePropDataSetTimeSource OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range: 0-255" ::= {sispm1040582lrtPTPClkConfAndStatus 46 } sispm1040582lrtPTPClkConfEntFilterParametersFilterType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Shows the filter type used which can be either the basic filter or an advanced filter that can be configured to use only a fraction of the packets received (i.e. the packets that have experienced the least latency). 0:BASIC" ::= {sispm1040582lrtPTPClkConfAndStatus 47 } sispm1040582lrtPTPClkConfEntFilterParametersDelayFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-6" ::= {sispm1040582lrtPTPClkConfAndStatus 48 } sispm1040582lrtPTPClkConfEntFilterParametersPeriod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:1-10000" ::= {sispm1040582lrtPTPClkConfAndStatus 49 } sispm1040582lrtPTPClkConfEntFilterParametersDist OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:1-10" ::= {sispm1040582lrtPTPClkConfAndStatus 50 } sispm1040582lrtPTPClkConfEntServoParametersDisplay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If true then Offset From Master, MeanPathDelay and clockAdjustment are logged on the debug terminal 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 51 } sispm1040582lrtPTPClkConfEntServoParametersPEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If true the P part of the algorithm is included 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 52 } sispm1040582lrtPTPClkConfEntServoParametersIEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If true the I part of the algorithm is included 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 53 } sispm1040582lrtPTPClkConfEntServoParametersDEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If true the D part of the algorithm is included 0:false 1:true" ::= {sispm1040582lrtPTPClkConfAndStatus 54 } sispm1040582lrtPTPClkConfEntServoParametersPConstant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-1000" ::= {sispm1040582lrtPTPClkConfAndStatus 55 } sispm1040582lrtPTPClkConfEntServoParametersIConstant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-10000" ::= {sispm1040582lrtPTPClkConfAndStatus 56 } sispm1040582lrtPTPClkConfEntServoParametersDConstant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "range:0-1000" ::= {sispm1040582lrtPTPClkConfAndStatus 57 } sispm1040582lrtPTPClockPortDataSetConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPTPClockPortDataSetConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPTP 8 } sispm1040582lrtPTPClockPortDataSetConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPTPClockPortDataSetConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPTPClockPortDataSetConfPort } ::= { sispm1040582lrtPTPClockPortDataSetConfTable 1 } SISPM1040582LRTPTPClockPortDataSetConfEntry ::= SEQUENCE { sispm1040582lrtPTPClockPortDataSetConfPort Integer32, sispm1040582lrtPTPClockConfEntryPortConfEnable Integer32, sispm1040582lrtPTPClockConfEntryPortConfStat DisplayString, sispm1040582lrtPTPClockConfEntryPortConfMDR Integer32, sispm1040582lrtPTPClockConfEntryPortConfPeerMeanPathDel DisplayString, sispm1040582lrtPTPClockConfEntryPortConfAnv Integer32, sispm1040582lrtPTPClockConfEntryPortConfATo Integer32, sispm1040582lrtPTPClockConfEntryPortConfSyv Integer32, sispm1040582lrtPTPClockConfEntryPortConfDlm Integer32, sispm1040582lrtPTPClockConfEntryPortConfMPR Integer32, sispm1040582lrtPTPClockConfEntryPortConfDelayAsymmetry Integer32, sispm1040582lrtPTPClockConfEntryPortConfIngressLatency Integer32, sispm1040582lrtPTPClockConfEntryPortConfEgressLatency Integer32, sispm1040582lrtPTPClockConfEntryPortConfVersion Integer32 } sispm1040582lrtPTPClockPortDataSetConfPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 1 } sispm1040582lrtPTPClockConfEntryPortConfEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "0:false 1:true" ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 2 } sispm1040582lrtPTPClockConfEntryPortConfStat OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic member portState: Current state of the port." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 3 } sispm1040582lrtPTPClockConfEntryPortConfMDR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic member log Min Delay Req Interval: The delay request interval announced by the master." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 4 } sispm1040582lrtPTPClockConfEntryPortConfPeerMeanPathDel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The path delay measured by the port in P2P mode. In E2E mode this value is 0" ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 5 } sispm1040582lrtPTPClockConfEntryPortConfAnv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval for issuing announce messages in master state. Range is -3 to 4." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 6 } sispm1040582lrtPTPClockConfEntryPortConfATo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout for receiving announce messages on the port. Range is 1 to 10." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 7 } sispm1040582lrtPTPClockConfEntryPortConfSyv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval for issuing sync messages in master. Range is -7 to 4." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 8 } sispm1040582lrtPTPClockConfEntryPortConfDlm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configurable member delayMechanism: The delay mechanism used for the port: e2e End to end delay measurement p2p Peer to peer delay measurement. Can be defined per port in an Ordinary/Boundary clock. In a transparent clock all ports use the same delay mechanism, determined by the clock type. 1:e2e 2:p2p" ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 9 } sispm1040582lrtPTPClockConfEntryPortConfMPR OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The interval for issuing Delay_Req messages for the port in E2e mode. This value is announced from the master to the slave in an announce message. The value is reflected in the MDR field in the Slave The interval for issuing Pdelay_Req messages for the port in P2P mode Note: The interpretation of this parameter has changed from release 2.40. In earlier versions the value was interpreted relative to the Sync interval, this was a violation of the standard, so now the value is interpreted as an interval. I.e. MPR = 0 => 1 Delay_Req pr sec, independent of the Sync rate. Range is -7 to 5." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 10 } sispm1040582lrtPTPClockConfEntryPortConfDelayAsymmetry OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If the transmission delay for a link in not symmetric, the asymmetry can be configured here, see IEEE 1588 Section 7.4.2 Communication path asymmetry Range is -100000 to 100000." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 11 } sispm1040582lrtPTPClockConfEntryPortConfIngressLatency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Ingress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. Range is -100000 to 100000." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 12 } sispm1040582lrtPTPClockConfEntryPortConfEgressLatency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Egress latency measured in ns, as defined in IEEE 1588 Section 7.3.4.2. Range is -100000 to 100000." ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 13 } sispm1040582lrtPTPClockConfEntryPortConfVersion OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current implementation only supports PTP version 2" ::= { sispm1040582lrtPTPClockPortDataSetConfEntry 14 } sispm1040582lrtPTPClockUnicastSlaveConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPTPClockUnicastSlaveConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPTP 9 } sispm1040582lrtPTPClockUnicastSlaveConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPTPClockUnicastSlaveConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPTPClockConfEntryUnicastSlaveConfIndex } ::= { sispm1040582lrtPTPClockUnicastSlaveConfTable 1 } SISPM1040582LRTPTPClockUnicastSlaveConfEntry ::= SEQUENCE { sispm1040582lrtPTPClockConfEntryUnicastSlaveConfIndex Integer32, sispm1040582lrtPTPClockConfEntryUnicastSlaveConfDuration Integer32, sispm1040582lrtPTPClockConfEntryUnicastSlaveConfIPAddress IpAddress, sispm1040582lrtPTPClockConfEntryUnicastSlaveConfGrant Integer32, sispm1040582lrtPTPClockConfEntryUnicastSlaveConfCommState DisplayString } sispm1040582lrtPTPClockConfEntryUnicastSlaveConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtPTPClockUnicastSlaveConfEntry 1 } sispm1040582lrtPTPClockConfEntryUnicastSlaveConfDuration OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds a master is requested to send Announce/Sync messages. The request is repeated from the slave each Duration/4 seconds. range:10-1000" ::= { sispm1040582lrtPTPClockUnicastSlaveConfEntry 2 } sispm1040582lrtPTPClockConfEntryUnicastSlaveConfIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IPv4 Address of the Master clock" ::= { sispm1040582lrtPTPClockUnicastSlaveConfEntry 3 } sispm1040582lrtPTPClockConfEntryUnicastSlaveConfGrant OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The granted repetition period for the sync message" ::= { sispm1040582lrtPTPClockUnicastSlaveConfEntry 4 } sispm1040582lrtPTPClockConfEntryUnicastSlaveConfCommState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The state of the communication with the master, possible values are: IDLE : The entry is not in use. INIT : Announce is sent to the master (Waiting for a response). CONN : The master has responded. SELL : The assigned master is selected as current master. SYNC : The master is sending Sync messages." ::= { sispm1040582lrtPTPClockUnicastSlaveConfEntry 5 } sispm1040582lrtETHLINKOAM OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 29 } sispm1040582lrtEthLinkOAMPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEthLinkOAMPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtETHLINKOAM 1 } sispm1040582lrtEthLinkOAMPortConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEthLinkOAMPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtEthLinkOAMPortConfIndex } ::= { sispm1040582lrtEthLinkOAMPortConfTable 1 } SISPM1040582LRTEthLinkOAMPortConfEntry ::= SEQUENCE { sispm1040582lrtEthLinkOAMPortConfIndex Integer32, sispm1040582lrtEthLinkOAMPortConfOAMEnable Integer32, sispm1040582lrtEthLinkOAMPortConfOAMMode Integer32, sispm1040582lrtEthLinkOAMPortConfLoopbackSupport Integer32, sispm1040582lrtEthLinkOAMPortConfLinkMonitorSupport Integer32, sispm1040582lrtEthLinkOAMPortConfMIBRetrievalSupport Integer32, sispm1040582lrtEthLinkOAMPortConfLoopbackOperation Integer32 } sispm1040582lrtEthLinkOAMPortConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 1 } sispm1040582lrtEthLinkOAMPortConfOAMEnable OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether Link OAM is enabled on this switch port. Enabling Link OAM provides the network operators the ability to monitor the health of the network and quickly determine the location of failing links or fault conditions. 0:disable 1:enable" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 2 } sispm1040582lrtEthLinkOAMPortConfOAMMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Configures the OAM Mode as Active or Passive. The default mode is Passive. 0:Passive mode 1:Active mode" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 3 } sispm1040582lrtEthLinkOAMPortConfLoopbackSupport OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the loopback support is enabled for the switch port. 0:disable 1:enable" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 4 } sispm1040582lrtEthLinkOAMPortConfLinkMonitorSupport OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the Link Monitor support is enabled for the switch port. 0:disable 1:enable" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 5 } sispm1040582lrtEthLinkOAMPortConfMIBRetrievalSupport OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Controls whether the MIB Retrieval Support is enabled for the switch port. 0:disable 1:enable" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 6 } sispm1040582lrtEthLinkOAMPortConfLoopbackOperation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "If the Loopback support is enabled, enabling this field will start a loopback operation for the port. 0:disable 1:enable" ::= { sispm1040582lrtEthLinkOAMPortConfEntry 7 } sispm1040582lrtEthLinkOAMPortDetailStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEthLinkOAMPortDetailStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Detail Status table" ::= { sispm1040582lrtETHLINKOAM 2 } sispm1040582lrtEthLinkOAMPortDetailStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEthLinkOAMPortDetailStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Detail Status entry" INDEX { sispm1040582lrtEthLinkOAMPortDetailStatusIndex } ::= { sispm1040582lrtEthLinkOAMPortDetailStatusTable 1 } SISPM1040582LRTEthLinkOAMPortDetailStatusEntry ::= SEQUENCE { sispm1040582lrtEthLinkOAMPortDetailStatusIndex Integer32, sispm1040582lrtEthLinkOAMPortPDUPermission DisplayString, sispm1040582lrtEthLinkOAMPortDiscoveryState DisplayString, sispm1040582lrtEthLinkOAMPortPeerMACAddress DisplayString, sispm1040582lrtEthLinkOAMPortLocalMode DisplayString, sispm1040582lrtEthLinkOAMPortLocalUnidirectOperSupport DisplayString, sispm1040582lrtEthLinkOAMPortLocalRemoteLoopbackSupport DisplayString, sispm1040582lrtEthLinkOAMPortLocalLinkMonitoringSupport DisplayString, sispm1040582lrtEthLinkOAMPortLocalMIBRetrievalSupport DisplayString, sispm1040582lrtEthLinkOAMPortLocalMTUSize Integer32, sispm1040582lrtEthLinkOAMPortLocalMultiplexerState DisplayString, sispm1040582lrtEthLinkOAMPortLocalParserState DisplayString, sispm1040582lrtEthLinkOAMPortLocalOrganUniqueIdent DisplayString, sispm1040582lrtEthLinkOAMPortLocalPDURevision Integer32, sispm1040582lrtEthLinkOAMPortPeerMode DisplayString, sispm1040582lrtEthLinkOAMPortPeerUnidirectOperSupport DisplayString, sispm1040582lrtEthLinkOAMPortPeerRemoteLoopbackSupport DisplayString, sispm1040582lrtEthLinkOAMPortPeerLinkMonitoringSupport DisplayString, sispm1040582lrtEthLinkOAMPortPeerMIBRetrievalSupport DisplayString, sispm1040582lrtEthLinkOAMPortPeerMTUSize DisplayString, sispm1040582lrtEthLinkOAMPortPeerMultiplexerState DisplayString, sispm1040582lrtEthLinkOAMPortPeerParserState DisplayString, sispm1040582lrtEthLinkOAMPortPeerOrganUniqueIdent DisplayString, sispm1040582lrtEthLinkOAMPortPDURevision DisplayString } sispm1040582lrtEthLinkOAMPortDetailStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 1 } sispm1040582lrtEthLinkOAMPortPDUPermission OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are Link fault, Receive only, Information exchange only, ANY." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 2 } sispm1040582lrtEthLinkOAMPortDiscoveryState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current state of the discovery process. Possible states are Fault state, Active state, Passive state, SEND_LOCAL_REMOTE_STATE, SEND_LOCAL_REMOTE_OK_STATE, SEND_ANY_STATE." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 3 } sispm1040582lrtEthLinkOAMPortPeerMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 4 } sispm1040582lrtEthLinkOAMPortLocalMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Mode in which the Link OAM is operating, Active or Passive." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 5 } sispm1040582lrtEthLinkOAMPortLocalUnidirectOperSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 6 } sispm1040582lrtEthLinkOAMPortLocalRemoteLoopbackSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If status is enabled, DTE is capable of OAM remote loopback mode." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 7 } sispm1040582lrtEthLinkOAMPortLocalLinkMonitoringSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If status is enabled, DTE supports interpreting Link Events." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 8 } sispm1040582lrtEthLinkOAMPortLocalMIBRetrievalSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If status ie enabled DTE supports sending Variable Response OAMPDUs." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 9 } sispm1040582lrtEthLinkOAMPortLocalMTUSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 10 } sispm1040582lrtEthLinkOAMPortLocalMultiplexerState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 11 } sispm1040582lrtEthLinkOAMPortLocalParserState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 12 } sispm1040582lrtEthLinkOAMPortLocalOrganUniqueIdent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "24-bit Organizationally Unique Identifier of the vendor." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 13 } sispm1040582lrtEthLinkOAMPortLocalPDURevision OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current revision of the Information TLV. The value of this field shall start at zero and be incremented each time something in the Information TLV changes. Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed (an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed)." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 14 } sispm1040582lrtEthLinkOAMPortPeerMode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The Mode in which the Link OAM is operating, Active or Passive." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 15 } sispm1040582lrtEthLinkOAMPortPeerUnidirectOperSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 16 } sispm1040582lrtEthLinkOAMPortPeerRemoteLoopbackSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If status is enabled, DTE is capable of OAM remote loopback mode." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 17 } sispm1040582lrtEthLinkOAMPortPeerLinkMonitoringSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If status is enabled, DTE supports interpreting Link Events." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 18 } sispm1040582lrtEthLinkOAMPortPeerMIBRetrievalSupport OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "If status ie enabled DTE supports sending Variable Response OAMPDUs." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 19 } sispm1040582lrtEthLinkOAMPortPeerMTUSize OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 20 } sispm1040582lrtEthLinkOAMPortPeerMultiplexerState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 21 } sispm1040582lrtEthLinkOAMPortPeerParserState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding state, Device is discarding non-OAMPDUs." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 22 } sispm1040582lrtEthLinkOAMPortPeerOrganUniqueIdent OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "24-bit Organizationally Unique Identifier of the vendor." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 23 } sispm1040582lrtEthLinkOAMPortPDURevision OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "It indicates the current revision of the Information TLV. The value of this field shall start at zero and be incremented each time something in the Information TLV changes. Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed (an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed)." ::= { sispm1040582lrtEthLinkOAMPortDetailStatusEntry 24 } sispm1040582lrtEthLinkOAMPortLinkEventConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEthLinkOAMPortLinkEventConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Link Event Conf Table" ::= { sispm1040582lrtETHLINKOAM 3 } sispm1040582lrtEthLinkOAMPortLinkEventConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEthLinkOAMPortLinkEventConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Link Event Conf Entry" INDEX { sispm1040582lrtPortLinkEvtConfIndex } ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfTable 1 } SISPM1040582LRTEthLinkOAMPortLinkEventConfEntry ::= SEQUENCE { sispm1040582lrtPortLinkEvtConfIndex Integer32, sispm1040582lrtPortLinkEvtConfErrFrameEvtErrWindow Integer32, sispm1040582lrtPortLinkEvtConfErrFrameEvtErrThreshold Integer32, sispm1040582lrtPortLinkEvtConfSymbolPeriErrEvtErrWindow Integer32, sispm1040582lrtPortLinkEvtConfSymbolPeriErrEvtErrThreshold Integer32, sispm1040582lrtPortLinkEvtConfSecSummEvtErrWindow Integer32, sispm1040582lrtPortLinkEvtConfSecSummEvtErrThreshold Integer32 } sispm1040582lrtPortLinkEvtConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 1 } sispm1040582lrtPortLinkEvtConfErrFrameEvtErrWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Errored Frame Event counts the number of errored frames detected during the specified period. Represents the window period in the order of 1 sec for the observation of various link events. range: 1-60" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 2 } sispm1040582lrtPortLinkEvtConfErrFrameEvtErrThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Errored Frame Event counts the number of errored frames detected during the specified period. Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error. range:0-0xffffffff" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 3 } sispm1040582lrtPortLinkEvtConfSymbolPeriErrEvtErrWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period. Represents the window period in the order of 1 sec for the observation of various link events. range: 1-60" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 4 } sispm1040582lrtPortLinkEvtConfSymbolPeriErrEvtErrThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Errored Symbol Period Event counts the number of symbol errors that occurred during the specified period. Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error. range:0-0xffffffff" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 5 } sispm1040582lrtPortLinkEvtConfSecSummEvtErrWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period. Represents the window period in the order of 1 sec for the observation of various link events. range: 10-900" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 6 } sispm1040582lrtPortLinkEvtConfSecSummEvtErrThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Errored Frame Seconds Summary Event TLV counts the number of errored frame seconds that occurred during the specified period. Represents the threshold value for the window period for the appropriate Link event so as to notify the peer of this error. range:0-0xffff" ::= { sispm1040582lrtEthLinkOAMPortLinkEventConfEntry 7 } sispm1040582lrtEthLinkOAMPortDetailedStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEthLinkOAMPortDetailedStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Detailed Statistics Table" ::= { sispm1040582lrtETHLINKOAM 4 } sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEthLinkOAMPortDetailedStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Detailed Statistics Entry" INDEX { sispm1040582lrtPortDetailedStatisticsIndex } ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsTable 1 } SISPM1040582LRTEthLinkOAMPortDetailedStatisticsEntry ::= SEQUENCE { sispm1040582lrtPortDetailedStatisticsIndex Integer32, sispm1040582lrtPortDetailedStatisticsRxOAMInfoPDUs Integer32, sispm1040582lrtPortDetailedStatisticsRxUniqueErrEvtNotif Integer32, sispm1040582lrtPortDetailedStatisticsRxDupErrEvtNotif Integer32, sispm1040582lrtPortDetailedStatisticsRxLoopbackControl Integer32, sispm1040582lrtPortDetailedStatisticsRxVariableRequest Integer32, sispm1040582lrtPortDetailedStatisticsRxVariableResponse Integer32, sispm1040582lrtPortDetailedStatisticsRxOrgSpecificPDUs Integer32, sispm1040582lrtPortDetailedStatisticsRxUnsupportedCodes Integer32, sispm1040582lrtPortDetailedStatisticsRxLinkFaultPDUs Integer32, sispm1040582lrtPortDetailedStatisticsRxDyingGasp Integer32, sispm1040582lrtPortDetailedStatisticsRxCriticalEvtPDUs Integer32, sispm1040582lrtPortDetailedStatisticsTxOAMInfoPDUs Integer32, sispm1040582lrtPortDetailedStatisticsTxUniqueErrEvtNotif Integer32, sispm1040582lrtPortDetailedStatisticsTxDupErrEvtNotif Integer32, sispm1040582lrtPortDetailedStatisticsTxLoopbackControl Integer32, sispm1040582lrtPortDetailedStatisticsTxVariableRequest Integer32, sispm1040582lrtPortDetailedStatisticsTxVariableResponse Integer32, sispm1040582lrtPortDetailedStatisticsTxOrgSpecificPDUs Integer32, sispm1040582lrtPortDetailedStatisticsTxUnsupportedCodes Integer32, sispm1040582lrtPortDetailedStatisticsTxLinkFaultPDUs Integer32, sispm1040582lrtPortDetailedStatisticsTxDyingGasp Integer32, sispm1040582lrtPortDetailedStatisticsTxCriticalEvtPDUs Integer32, sispm1040582lrtPortDetailedStatisticsClear Integer32 } sispm1040582lrtPortDetailedStatisticsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 1 } sispm1040582lrtPortDetailedStatisticsRxOAMInfoPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received and transmitted OAM Information PDU's. Discontinuities of this counter can occur at re-initialization of the management system." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 2 } sispm1040582lrtPortDetailedStatisticsRxUniqueErrEvtNotif OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of unique Event OAMPDUs received and transmitted on this interface. Event Notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification transmissions are counted by Duplicate Event Notification counters for Tx and Rx respectively. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 3 } sispm1040582lrtPortDetailedStatisticsRxDupErrEvtNotif OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of duplicate Event OAMPDUs received and transmitted on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 4 } sispm1040582lrtPortDetailedStatisticsRxLoopbackControl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Loopback Control OAMPDUs received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 5 } sispm1040582lrtPortDetailedStatisticsRxVariableRequest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Request OAMPDUs received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 6 } sispm1040582lrtPortDetailedStatisticsRxVariableResponse OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Response OAMPDUs received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 7 } sispm1040582lrtPortDetailedStatisticsRxOrgSpecificPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Organization Specific OAMPDUs transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 8 } sispm1040582lrtPortDetailedStatisticsRxUnsupportedCodes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 9 } sispm1040582lrtPortDetailedStatisticsRxLinkFaultPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Link fault PDU's received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 10 } sispm1040582lrtPortDetailedStatisticsRxDyingGasp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Dying Gasp events received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 11 } sispm1040582lrtPortDetailedStatisticsRxCriticalEvtPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Critical event PDU's received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 12 } sispm1040582lrtPortDetailedStatisticsTxOAMInfoPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received and transmitted OAM Information PDU's. Discontinuities of this counter can occur at re-initialization of the management system." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 13 } sispm1040582lrtPortDetailedStatisticsTxUniqueErrEvtNotif OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of unique Event OAMPDUs received and transmitted on this interface. Event Notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. Duplicate Event Notification transmissions are counted by Duplicate Event Notification counters for Tx and Rx respectively. A unique Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is distinct from the previously transmitted Event Notification OAMPDU Sequence Number." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 14 } sispm1040582lrtPortDetailedStatisticsTxDupErrEvtNotif OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of duplicate Event OAMPDUs received and transmitted on this interface. Event Notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame may be lost in transit. A duplicate Event Notification OAMPDU is indicated as an Event Notification OAMPDU with a Sequence Number field that is identical to the previously transmitted Event Notification OAMPDU Sequence Number." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 15 } sispm1040582lrtPortDetailedStatisticsTxLoopbackControl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Loopback Control OAMPDUs received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 16 } sispm1040582lrtPortDetailedStatisticsTxVariableRequest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Request OAMPDUs received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 17 } sispm1040582lrtPortDetailedStatisticsTxVariableResponse OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Variable Response OAMPDUs received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 18 } sispm1040582lrtPortDetailedStatisticsTxOrgSpecificPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Organization Specific OAMPDUs transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 19 } sispm1040582lrtPortDetailedStatisticsTxUnsupportedCodes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 20 } sispm1040582lrtPortDetailedStatisticsTxLinkFaultPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Link fault PDU's received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 21 } sispm1040582lrtPortDetailedStatisticsTxDyingGasp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Dying Gasp events received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 22 } sispm1040582lrtPortDetailedStatisticsTxCriticalEvtPDUs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of Critical event PDU's received and transmitted on this interface." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 23 } sispm1040582lrtPortDetailedStatisticsClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the counters for the selected port." ::= { sispm1040582lrtEthLinkOAMPortDetailedStatisticsEntry 24 } sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEthLinkOAMPortEventDetailedStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Event Detailed Statistics Table" ::= { sispm1040582lrtETHLINKOAM 5 } sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEthLinkOAMPortEventDetailedStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Eth Link OAM Port Event Detailed Statistics Entry" INDEX { sispm1040582lrtStatisticsIndex } ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsTable 1 } SISPM1040582LRTEthLinkOAMPortEventDetailedStatisticsEntry ::= SEQUENCE { sispm1040582lrtStatisticsIndex Integer32, sispm1040582lrtStatisticsLocalSequenceNumber Integer32, sispm1040582lrtStatisticsLocalFrameErrEvtTimestamp Integer32, sispm1040582lrtStatisticsLocalFrameErrEvtWindow Integer32, sispm1040582lrtStatisticsLocalFrameErrEvtThreshold Integer32, sispm1040582lrtStatisticsLocalFrameErrs Integer32, sispm1040582lrtStatisticsLocalTotalFrameErrs Counter64, sispm1040582lrtStatisticsLocalTotalFrameErrEvts Integer32, sispm1040582lrtStatisticsLocalFramePeriErrEvtTimestamp Integer32, sispm1040582lrtStatisticsLocalFramePeriErrEvtWindow Integer32, sispm1040582lrtStatisticsLocalFramePeriErrEvtThreshold Integer32, sispm1040582lrtStatisticsLocalFramePeriErrs Integer32, sispm1040582lrtStatisticsLocalTotalFramePeriErrs Counter64, sispm1040582lrtStatisticsLocalTotalFramePeriErrEvts Integer32, sispm1040582lrtStatisticsLocalSymbolPeriErrEvtTimestamp Integer32, sispm1040582lrtStatisticsLocalSymbolPeriErrEvtWindow Counter64, sispm1040582lrtStatisticsLocalSymbolPeriErrEvtThreshold Counter64, sispm1040582lrtStatisticsLocalSymbolPeriErrs Counter64, sispm1040582lrtStatisticsLocalSymbolFramePeriErrs Counter64, sispm1040582lrtStatisticsLocalSymbolFramePeriErrEvts Integer32, sispm1040582lrtStatisticsLocalEvtSecondsSummTimeStamp Integer32, sispm1040582lrtStatisticsLocalEvtSecondsSummWindow Integer32, sispm1040582lrtStatisticsLocalEvtSecondsSummThreshold Integer32, sispm1040582lrtStatisticsLocalEvtSecondsSummEvts Integer32, sispm1040582lrtStatisticsLocalEvtSecondsSummErrTotal Integer32, sispm1040582lrtStatisticsLocalEvtSecondsSummEvtTotal Integer32, sispm1040582lrtStatisticsRemoteFrameErrEvtTimestamp Integer32, sispm1040582lrtStatisticsRemoteFrameErrEvtWindow Integer32, sispm1040582lrtStatisticsRemoteFrameErrEvtThreshold Integer32, sispm1040582lrtStatisticsRemoteFrameErrs Integer32, sispm1040582lrtStatisticsRemoteTotalFrameErrs Counter64, sispm1040582lrtStatisticsRemoteTotalFrameErrEvts Integer32, sispm1040582lrtStatisticsRemoteFramePeriErrEvtTimestamp Integer32, sispm1040582lrtStatisticsRemoteFramePeriErrEvtWindow Integer32, sispm1040582lrtStatisticsRemoteFramePeriErrEvtThreshold Integer32, sispm1040582lrtStatisticsRemoteFramePeriErrs Integer32, sispm1040582lrtStatisticsRemoteTotalFramePeriErrs Counter64, sispm1040582lrtStatisticsRemoteTotalFramePeriErrEvts Integer32, sispm1040582lrtStatisticsRemoteSymbolPeriErrEvtTimestamp Integer32, sispm1040582lrtStatisticsRemoteSymbolPeriErrEvtWindow Counter64, sispm1040582lrtStatisticsRemoteSymbolPeriErrEvtThreshold Counter64, sispm1040582lrtStatisticsRemoteSymbolPeriErrs Counter64, sispm1040582lrtStatisticsRemoteSymbolFramePeriErrs Counter64, sispm1040582lrtStatisticsRemoteSymbolFramePeriErrEvts Integer32, sispm1040582lrtStatisticsRemoteEvtSecondsSummTimeStamp Integer32, sispm1040582lrtStatisticsRemoteEvtSecondsSummWindow Integer32, sispm1040582lrtStatisticsRemoteEvtSecondsSummThreshold Integer32, sispm1040582lrtStatisticsRemoteEvtSecondsSummEvts Integer32, sispm1040582lrtStatisticsRemoteEvtSecondsSummErrTotal Integer32, sispm1040582lrtStatisticsRemoteEvtSecondsSummEvtTotal Integer32 } sispm1040582lrtStatisticsIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 1 } sispm1040582lrtStatisticsLocalSequenceNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the total number of events occurred at the remote end." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 2 } sispm1040582lrtStatisticsLocalFrameErrEvtTimestamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 3 } sispm1040582lrtStatisticsLocalFrameErrEvtWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 4 } sispm1040582lrtStatisticsLocalFrameErrEvtThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 5 } sispm1040582lrtStatisticsLocalFrameErrs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of detected errored frames in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 6 } sispm1040582lrtStatisticsLocalTotalFrameErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 7 } sispm1040582lrtStatisticsLocalTotalFrameErrEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 8 } sispm1040582lrtStatisticsLocalFramePeriErrEvtTimestamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 9 } sispm1040582lrtStatisticsLocalFramePeriErrEvtWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the duration of period in terms of frames." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 10 } sispm1040582lrtStatisticsLocalFramePeriErrEvtThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 11 } sispm1040582lrtStatisticsLocalFramePeriErrs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of frame errors in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 12 } sispm1040582lrtStatisticsLocalTotalFramePeriErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 13 } sispm1040582lrtStatisticsLocalTotalFramePeriErrEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 14 } sispm1040582lrtStatisticsLocalSymbolPeriErrEvtTimestamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 15 } sispm1040582lrtStatisticsLocalSymbolPeriErrEvtWindow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the number of symbols in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 16 } sispm1040582lrtStatisticsLocalSymbolPeriErrEvtThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 17 } sispm1040582lrtStatisticsLocalSymbolPeriErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the number of symbol errors in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 18 } sispm1040582lrtStatisticsLocalSymbolFramePeriErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 19 } sispm1040582lrtStatisticsLocalSymbolFramePeriErrEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 20 } sispm1040582lrtStatisticsLocalEvtSecondsSummTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 21 } sispm1040582lrtStatisticsLocalEvtSecondsSummWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 22 } sispm1040582lrtStatisticsLocalEvtSecondsSummThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 23 } sispm1040582lrtStatisticsLocalEvtSecondsSummEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 24 } sispm1040582lrtStatisticsLocalEvtSecondsSummErrTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 25 } sispm1040582lrtStatisticsLocalEvtSecondsSummEvtTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 26 } sispm1040582lrtStatisticsRemoteFrameErrEvtTimestamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 27 } sispm1040582lrtStatisticsRemoteFrameErrEvtWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the duration of the period in terms of 100 ms intervals. 1) The default value is one second. 2) The lower bound is one second. 3) The upper bound is one minute." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 28 } sispm1040582lrtStatisticsRemoteFrameErrEvtThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of detected errored frames in the period is required to be equal to or greater than in order for the event to be generated. 1) The default value is one frame error. 2) The lower bound is zero frame errors. 3) The upper bound is unspecified." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 29 } sispm1040582lrtStatisticsRemoteFrameErrs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of detected errored frames in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 30 } sispm1040582lrtStatisticsRemoteTotalFrameErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the sum of errored frames that have been detected since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 31 } sispm1040582lrtStatisticsRemoteTotalFrameErrEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Frame Event TLVs that have been generated since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 32 } sispm1040582lrtStatisticsRemoteFramePeriErrEvtTimestamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 33 } sispm1040582lrtStatisticsRemoteFramePeriErrEvtWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the duration of period in terms of frames." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 34 } sispm1040582lrtStatisticsRemoteFramePeriErrEvtThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of errored frames in the period is required to be equal to or greater than in order for the event to be generated." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 35 } sispm1040582lrtStatisticsRemoteFramePeriErrs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of frame errors in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 36 } sispm1040582lrtStatisticsRemoteTotalFramePeriErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the sum of frame errors that have been detected since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 37 } sispm1040582lrtStatisticsRemoteTotalFramePeriErrEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Frame Period Event TLVs that have been generated since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 38 } sispm1040582lrtStatisticsRemoteSymbolPeriErrEvtTimestamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 39 } sispm1040582lrtStatisticsRemoteSymbolPeriErrEvtWindow OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the number of symbols in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 40 } sispm1040582lrtStatisticsRemoteSymbolPeriErrEvtThreshold OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the number of errored symbols in the period is required to be equal to or greater than in order for the event to be generated." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 41 } sispm1040582lrtStatisticsRemoteSymbolPeriErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the number of symbol errors in the period." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 42 } sispm1040582lrtStatisticsRemoteSymbolFramePeriErrs OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This eight-octet field indicates the sum of symbol errors since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 43 } sispm1040582lrtStatisticsRemoteSymbolFramePeriErrEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Symbol Period Event TLVs that have been generated since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 44 } sispm1040582lrtStatisticsRemoteEvtSecondsSummTimeStamp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the time reference when the event was generated, in terms of 100 ms intervals, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 45 } sispm1040582lrtStatisticsRemoteEvtSecondsSummWindow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the duration of the period in terms of 100 ms intervals, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 46 } sispm1040582lrtStatisticsRemoteEvtSecondsSummThreshold OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the number of errored frame seconds in the period is required to be equal to or greater than in order for the event to be generated, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 47 } sispm1040582lrtStatisticsRemoteEvtSecondsSummEvts OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This two-octet field indicates the number of errored frame seconds in the period, encoded as a 16-bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 48 } sispm1040582lrtStatisticsRemoteEvtSecondsSummErrTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the sum of errored frame seconds that have been detected since the OAM sublayer was reset." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 49 } sispm1040582lrtStatisticsRemoteEvtSecondsSummEvtTotal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This four-octet field indicates the number of Errored Frame Seconds Summary Event TLVs that have been generated since the OAM sublayer was reset, encoded as a 32bit unsigned integer." ::= { sispm1040582lrtEthLinkOAMPortEventDetailedStatisticsEntry 50 } sispm1040582lrtEVC OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 30 } sispm1040582lrtEVCPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEVCPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtEVC 1 } sispm1040582lrtEVCPortConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEVCPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtEVCPortConfIndex } ::= { sispm1040582lrtEVCPortConfTable 1 } SISPM1040582LRTEVCPortConfEntry ::= SEQUENCE { sispm1040582lrtEVCPortConfIndex Integer32, sispm1040582lrtEVCPortConfDEIMode Integer32, sispm1040582lrtEVCPortConfTagMode Integer32, sispm1040582lrtEVCPortConfAddressMode Integer32 } sispm1040582lrtEVCPortConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEVCPortConfEntry 1 } sispm1040582lrtEVCPortConfDEIMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The DEI mode for an NNI port determines whether frames transmitted on the port will have the DEI field in the outer tag marked based on the colour of the frame. The allowed values are: 0:Fixed: The DEI value is determined by ECE rules. 1:Coloured: The DEI is 1 for yellow frames and 0 for green frames. " ::= { sispm1040582lrtEVCPortConfEntry 2 } sispm1040582lrtEVCPortConfTagMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The tag mode specifying whether the EVC classification must be based on the outer or inner tag. This can be used on NNI ports connected to another service provider, where an outer tunnel tag is added together with the inner tag identifying the EVC. The allowed values are: 0:Inner: Enable inner tag in EVC classification. 1:Outer: Enable outer tag in EVC classification." ::= { sispm1040582lrtEVCPortConfEntry 3 } sispm1040582lrtEVCPortConfAddressMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The IP/MAC address mode specifying whether the EVC classification must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses. The allowed values are: 0:Source: Enable SMAC/SIP matching. 1:Destination: Enable DMAC/DIP matching." ::= { sispm1040582lrtEVCPortConfEntry 4 } sispm1040582lrtEVCBandwidthProfilesConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEVCBandwidthProfilesConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtEVC 2 } sispm1040582lrtEVCBandwidthProfilesConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEVCBandwidthProfilesConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtEVCBandwidthProfilesConfIndex } ::= { sispm1040582lrtEVCBandwidthProfilesConfTable 1 } SISPM1040582LRTEVCBandwidthProfilesConfEntry ::= SEQUENCE { sispm1040582lrtEVCBandwidthProfilesConfIndex Integer32, sispm1040582lrtEVCBandwidthProfilesConfState Integer32, sispm1040582lrtEVCBandwidthProfilesConfType Integer32, sispm1040582lrtEVCBandwidthProfilesConfPolicerMode Integer32, sispm1040582lrtEVCBandwidthProfilesConfRateType Integer32, sispm1040582lrtEVCBandwidthProfilesConfCIRkbps Integer32, sispm1040582lrtEVCBandwidthProfilesConfCBSbytes Integer32, sispm1040582lrtEVCBandwidthProfilesConfEIRkbps Integer32, sispm1040582lrtEVCBandwidthProfilesConfEBSbytes Integer32 } sispm1040582lrtEVCBandwidthProfilesConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index" ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 1 } sispm1040582lrtEVCBandwidthProfilesConfState OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative state of the bandwidth profile. The allowed values are: 1:Enabled: The bandwidth profile enabled. 0:Disabled: The bandwidth profile is disabled. " ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 2 } sispm1040582lrtEVCBandwidthProfilesConfType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The policer type of the bandwidth profile. The allowed values are: 0:MEF: MEF ingress bandwidth profile. 1:Single: Single bucket policer." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 3 } sispm1040582lrtEVCBandwidthProfilesConfPolicerMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The colour mode of the bandwidth profile. The allowed values are: 0:Coupled: Colour-aware mode with coupling enabled. 1:Aware: Colour-aware mode with coupling disabled." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 4 } sispm1040582lrtEVCBandwidthProfilesConfRateType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The rate type of the bandwidth profile. The allowed values are: 0:Data: Specify that this bandwidth profile operates on data rate. 1:Line: Specify that this bandwidth profile operates on line rate." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 5 } sispm1040582lrtEVCBandwidthProfilesConfCIRkbps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Committed Information Rate of the bandwidth profile. The allowed range is from 0 through 10000000 kilobit per second." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 6 } sispm1040582lrtEVCBandwidthProfilesConfCBSbytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Committed Burst Size of the bandwidth profile. The allowed range is from 0 through 100000 bytes." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 7 } sispm1040582lrtEVCBandwidthProfilesConfEIRkbps OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Excess Information Rate for MEF type bandwidth profile. The allowed range is from 0 through 10000000 kilobit per second." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 8 } sispm1040582lrtEVCBandwidthProfilesConfEBSbytes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The Excess Burst Size for MEF type bandwidth profile. The allowed range is from 0 through 100000 bytes." ::= { sispm1040582lrtEVCBandwidthProfilesConfEntry 9 } sispm1040582lrtEVCControlListConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEVCControlListConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of EVC Control List Conf." ::= { sispm1040582lrtEVC 3 } sispm1040582lrtEVCControlListConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEVCControlListConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of EVC Control List Conf table." INDEX { sispm1040582lrtEVCControlListConfIndex } ::= { sispm1040582lrtEVCControlListConfTable 1 } SISPM1040582LRTEVCControlListConfEntry ::= SEQUENCE { sispm1040582lrtEVCControlListConfIndex Integer32, sispm1040582lrtEVCControlListConfEVCID Integer32, sispm1040582lrtEVCControlListConfVID Integer32, sispm1040582lrtEVCControlListConfIVID Integer32, sispm1040582lrtEVCControlListConfLearning Integer32, sispm1040582lrtEVCControlListConfPolicerIDFilter Integer32, sispm1040582lrtEVCControlListConfPolicerID Integer32, sispm1040582lrtEVCControlListConfInnerTagType Integer32, sispm1040582lrtEVCControlListConfInnerTagVIDMode Integer32, sispm1040582lrtEVCControlListConfInnerTagVLANID Integer32, sispm1040582lrtEVCControlListConfInnerTagPCPDEIPreservation Integer32, sispm1040582lrtEVCControlListConfInnerTagPCP Integer32, sispm1040582lrtEVCControlListConfInnerTagDEI Integer32, sispm1040582lrtEVCControlListConfOuterTagVLANID Integer32, sispm1040582lrtEVCControlListConfNNIPorts DisplayString, sispm1040582lrtEVCControlListConfLeafVID Integer32, sispm1040582lrtEVCControlListConfLeafIVID Integer32, sispm1040582lrtEVCControlListConfLeafPorts DisplayString, sispm1040582lrtEVCControlListConfRowStatus RowStatus } sispm1040582lrtEVCControlListConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "index" ::= {sispm1040582lrtEVCControlListConfEntry 1 } sispm1040582lrtEVCControlListConfEVCID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The EVC ID identifies the EVC. The allowed range is from 1 through 256." ::= {sispm1040582lrtEVCControlListConfEntry 2 } sispm1040582lrtEVCControlListConfVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or S-custom tag depending on the NNI port VLAN configuration. The allowed range is from 1 through 4095." ::= {sispm1040582lrtEVCControlListConfEntry 3 } sispm1040582lrtEVCControlListConfIVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Internal/classified VLAN ID in the PB network. The allowed range is from 1 through 4095." ::= {sispm1040582lrtEVCControlListConfEntry 4 } sispm1040582lrtEVCControlListConfLearning OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC. Learning may be disabled if the EVC only includes two UNI/NNI ports. The possible values are: 1:Enabled: Learning is enabled (MAC addresses are learned). 0:Disabled: Learning is disabled (MAC addresses are not learned)." ::= {sispm1040582lrtEVCControlListConfEntry 5 } sispm1040582lrtEVCControlListConfPolicerIDFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ingress bandwidth profile mode for the EVC. The possible values are: 0:Specific. 1:Discard: All received frames are discarded for the EVC. 2:None: None bandwidth profile for the EVC. " ::= {sispm1040582lrtEVCControlListConfEntry 6 } sispm1040582lrtEVCControlListConfPolicerID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ingress bandwidth profile ID for the EVC." ::= {sispm1040582lrtEVCControlListConfEntry 7 } sispm1040582lrtEVCControlListConfInnerTagType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The possible values are: 0:None: An inner tag is not inserted. 1:C-tag: An inner C-tag is inserted. 2:S-tag: An inner S-tag is inserted. 3:S-custom-tag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI." ::= {sispm1040582lrtEVCControlListConfEntry 8 } sispm1040582lrtEVCControlListConfInnerTagVIDMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The inner VID Mode affects the VID in the inner and outer tag. The possible values are: 0:Normal: The VID of the two outer tags aren't swapped. 1:Tunnel: The VID of the two outer tags are swapped, so that the VID of the outer tag is taken from the Inner Tag configuration and the VID of the inner tag is the EVC VID. In this mode, the NNI ports are normally configured to do EVC classification based on the inner tag." ::= {sispm1040582lrtEVCControlListConfEntry 9 } sispm1040582lrtEVCControlListConfInnerTagVLANID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The Inner tag VLAN ID. The allowed range is from 1 through 4095." ::= {sispm1040582lrtEVCControlListConfEntry 10 } sispm1040582lrtEVCControlListConfInnerTagPCPDEIPreservation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The inner tag PCP and DEI preservation. The possible values are: 1:Preserved: The inner tag PCP and DEI is preserved. 0:Fixed: The inner tag PCP and DEI is fixed." ::= {sispm1040582lrtEVCControlListConfEntry 11 } sispm1040582lrtEVCControlListConfInnerTagPCP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The inner tag PCP value. The allowed range is from 0 through 7." ::= {sispm1040582lrtEVCControlListConfEntry 12 } sispm1040582lrtEVCControlListConfInnerTagDEI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The inner tag DEI value. The allowed value is 0 or 1." ::= {sispm1040582lrtEVCControlListConfEntry 13 } sispm1040582lrtEVCControlListConfOuterTagVLANID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The EVC outer tag VID for UNI ports. The allowed range is from 1 through 4095." ::= {sispm1040582lrtEVCControlListConfEntry 14 } sispm1040582lrtEVCControlListConfNNIPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The list of Network to Network Interfaces for the EVC." ::= {sispm1040582lrtEVCControlListConfEntry 15 } sispm1040582lrtEVCControlListConfLeafVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The leaf VLAN ID used in the outer tag for the EVC. range:1-4095" ::= {sispm1040582lrtEVCControlListConfEntry 16 } sispm1040582lrtEVCControlListConfLeafIVID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The leaf internal classified VLAN ID for the EVC. range:1-4095" ::= {sispm1040582lrtEVCControlListConfEntry 17 } sispm1040582lrtEVCControlListConfLeafPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION " The list of leaf ports for the EVC." ::= {sispm1040582lrtEVCControlListConfEntry 18 } sispm1040582lrtEVCControlListConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "EVC Control List Conf Row Status." ::= {sispm1040582lrtEVCControlListConfEntry 19 } sispm1040582lrtECEControlListConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTECEControlListConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of ECE Control List Conf." ::= { sispm1040582lrtEVC 4 } sispm1040582lrtECEControlListConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTECEControlListConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of ECE Control List Conf table." INDEX { sispm1040582lrtECECtlListConfIndex } ::= { sispm1040582lrtECEControlListConfTable 1 } SISPM1040582LRTECEControlListConfEntry ::= SEQUENCE { sispm1040582lrtECECtlListConfIndex Integer32, sispm1040582lrtECECtlListConfECEID Integer32, sispm1040582lrtECECtlListConfUNIPorts DisplayString, sispm1040582lrtECECtlListConfIngressMatchingTagType Integer32, sispm1040582lrtECECtlListConfIngressMatchingVLANIDFilter Integer32, sispm1040582lrtECECtlListConfIngressMatchingVLANIDRangeLow Integer32, sispm1040582lrtECECtlListConfIngressMatchingVLANIDRangeHigh Integer32, sispm1040582lrtECECtlListConfIngressMatchingPCP Integer32, sispm1040582lrtECECtlListConfIngressMatchingDEI Integer32, sispm1040582lrtECECtlListConfIngressMatchingFrameType Integer32, sispm1040582lrtECECtlListConfActionsDirection Integer32, sispm1040582lrtECECtlListConfActionsEVCIDFilter Integer32, sispm1040582lrtECECtlListConfActionsEVCIDValue Integer32, sispm1040582lrtECECtlListConfActionsTagPopCount Integer32, sispm1040582lrtECECtlListConfActionsPolicyID Integer32, sispm1040582lrtECECtlListConfActionsClass Integer32, sispm1040582lrtECECtlListConfMACParametersDMACType Integer32, sispm1040582lrtECECtlListConfMACParametersSMACFilter Integer32, sispm1040582lrtECECtlListConfMACParametersSMACValue DisplayString, sispm1040582lrtECECtlListConfIPv4Protocol Integer32, sispm1040582lrtECECtlListConfIPv4ProtocolValue Integer32, sispm1040582lrtECECtlListConfIPv4SIPDIPFilter Integer32, sispm1040582lrtECECtlListConfIPv4SIPDIPAddress IpAddress, sispm1040582lrtECECtlListConfIPv4SIPDIPMask IpAddress, sispm1040582lrtECECtlListConfIPv4DSCPFilter Integer32, sispm1040582lrtECECtlListConfIPv4DSCPRangeLow Integer32, sispm1040582lrtECECtlListConfIPv4DSCPRangeHigh Integer32, sispm1040582lrtECECtlListConfIPv4Fragment Integer32, sispm1040582lrtECECtlListConfIPv4SourcePortFilter Integer32, sispm1040582lrtECECtlListConfIPv4SourceRangeLow Integer32, sispm1040582lrtECECtlListConfIPv4SourceRangeHigh Integer32, sispm1040582lrtECECtlListConfIPv4DestPortFilter Integer32, sispm1040582lrtECECtlListConfIPv4DestRangeLow Integer32, sispm1040582lrtECECtlListConfIPv4DestRangeHigh Integer32, sispm1040582lrtECECtlListConfIPv6Protocol Integer32, sispm1040582lrtECECtlListConfIPv6ProtocolValue Integer32, sispm1040582lrtECECtlListConfIPv6SIPDIPFilter Integer32, sispm1040582lrtECECtlListConfIPv6SIPDIPAddress IpAddress, sispm1040582lrtECECtlListConfIPv6SIPDIPMask IpAddress, sispm1040582lrtECECtlListConfIPv6DSCPFilter Integer32, sispm1040582lrtECECtlListConfIPv6DSCPRangeLow Integer32, sispm1040582lrtECECtlListConfIPv6DSCPRangeHigh Integer32, sispm1040582lrtECECtlListConfIPv6SourcePortFilter Integer32, sispm1040582lrtECECtlListConfIPv6SourceRangeLow Integer32, sispm1040582lrtECECtlListConfIPv6SourceRangeHigh Integer32, sispm1040582lrtECECtlListConfIPv6DestPortFilter Integer32, sispm1040582lrtECECtlListConfIPv6DestRangeLow Integer32, sispm1040582lrtECECtlListConfIPv6DestRangeHigh Integer32, sispm1040582lrtECECtlListConfEgressOuterTagMode Integer32, sispm1040582lrtECECtlListConfEgressOuterTagPCPDEIPresv Integer32, sispm1040582lrtECECtlListConfEgressOuterTagPCP Integer32, sispm1040582lrtECECtlListConfEgressOuterTagDEI Integer32, sispm1040582lrtECECtlListConfConflict Integer32, sispm1040582lrtECECtlListConfRowStatus RowStatus } sispm1040582lrtECECtlListConfIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "index" ::= {sispm1040582lrtECEControlListConfEntry 1 } sispm1040582lrtECECtlListConfECEID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ECE ID identifies the ECE. Unique ECE IDs are automatically assigned to ECEs added. The possible range is from 1 through 256." ::= {sispm1040582lrtECEControlListConfEntry 2 } sispm1040582lrtECECtlListConfUNIPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The list of User Network Interfaces for the ECE. Ex:1,2 1-5" ::= {sispm1040582lrtECEControlListConfEntry 3 } sispm1040582lrtECECtlListConfIngressMatchingTagType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The tag type for the ECE. The possible values are: 0:Any: The ECE will match both tagged and untagged frames. 1:Untagged: The ECE will match untagged frames only. 2:C-Tagged: The ECE will match custom tagged frames only. 3:S-Tagged: The ECE will match service tagged frames only. 4:Tagged: The ECE will match tagged frames only." ::= {sispm1040582lrtECEControlListConfEntry 4 } sispm1040582lrtECECtlListConfIngressMatchingVLANIDFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: 0:Any: No VLAN ID filter is specified. (VLAN ID filter status is don't-care.) 1:Specific: If you want to filter a specific VLAN ID value with this ECE, choose this value. A field for entering a specific value appears. 2:Range: If you want to filter a specific VLAN ID range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 5 } sispm1040582lrtECECtlListConfIngressMatchingVLANIDRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4095." ::= {sispm1040582lrtECEControlListConfEntry 6 } sispm1040582lrtECECtlListConfIngressMatchingVLANIDRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4095." ::= {sispm1040582lrtECEControlListConfEntry 7 } sispm1040582lrtECECtlListConfIngressMatchingPCP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The PCP value for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: 14:Any: The ECE will match any PCP value. 0-7:Specific: The ECE will match a specific PCP in the range 0 through 7. 8-13:Range: The ECE will match PCP values in the selected range 0-1, 2-3, 4-5, 6-7, 0-3 or 4-7." ::= {sispm1040582lrtECEControlListConfEntry 8 } sispm1040582lrtECECtlListConfIngressMatchingDEI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The DEI value for matching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0:Any 1:0 2:1" ::= {sispm1040582lrtECEControlListConfEntry 9 } sispm1040582lrtECECtlListConfIngressMatchingFrameType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The frame type for the ECE. The possible values are: 0:Any: The ECE will match any frame type. 1:IPv4: The ECE will match IPv4 frames only. 2:IPv6: The ECE will match IPv6 frames only." ::= {sispm1040582lrtECEControlListConfEntry 16 } sispm1040582lrtECECtlListConfActionsDirection OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports will be setup to match the traffic being forwarded to NNI ports. The possible values are: 0:Both: Bidirectional. 1:UNI-to-NNI: Unidirectional from UNI to NNI. 2:NNI-to-UNI: Unidirectional from NNI to UNI." ::= {sispm1040582lrtECEControlListConfEntry 17 } sispm1040582lrtECECtlListConfActionsEVCIDFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The EVC ID for the ECE. The ECE is only active when mapping to an existing EVC. The possible values are: 0:None: No EVC ID filter is specified. (EVC ID filter status is don't-care.) 1:Specific: If you want to filter a specific EVC ID with this ECE, choose this value. A field for entering a specific value appears." ::= {sispm1040582lrtECEControlListConfEntry 18 } sispm1040582lrtECECtlListConfActionsEVCIDValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 1 through 256." ::= {sispm1040582lrtECEControlListConfEntry 19 } sispm1040582lrtECECtlListConfActionsTagPopCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ingress tag pop count for the ECE. The allowed range is from 0 through 2." ::= {sispm1040582lrtECEControlListConfEntry 22 } sispm1040582lrtECECtlListConfActionsPolicyID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The ACL Policy ID for the ECE for matching ACL rules. The allowed range is from 0 through 255." ::= {sispm1040582lrtECEControlListConfEntry 23 } sispm1040582lrtECECtlListConfActionsClass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The traffic class for the ECE. The allowed range is from 0 through 7 or disabled(8)." ::= {sispm1040582lrtECEControlListConfEntry 24 } sispm1040582lrtECECtlListConfMACParametersDMACType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The destination MAC address type for matching the ECE. The possible values are: 0:Any: No DMAC tyoe is specified. (DMAC filter status is don't-care.) 1:Unicast: Frame must be unicast. 2:Multicast: Frame must be multicast. 3:Broadcast: Frame must be broadcast." ::= {sispm1040582lrtECEControlListConfEntry 25 } sispm1040582lrtECECtlListConfMACParametersSMACFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The source MAC address for matching the ECE. The possible values are: 0:Any: No SMAC filter is specified. (SMAC filter status is don't-care.) 1:Specific: If you want to filter a specific SMAC value with this ECE, choose this value. A field for entering a specific value appears." ::= {sispm1040582lrtECEControlListConfEntry 28 } sispm1040582lrtECECtlListConfMACParametersSMACValue OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the SMAC filter, you can enter a specific value. The legal format is xx-xx-xx-xx-xx-xx (x is a hexadecimal digit)." ::= {sispm1040582lrtECEControlListConfEntry 29 } sispm1040582lrtECECtlListConfIPv4Protocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IP protocol for matching the ECE. The possible values are: 0:Any: No protocol filter is specified. (Protocol filter status is don't-care.) 1:UDP: Specify the UDP for matching the ECE. 2:TCP: Specify the TCP for matching the ECE. 3:Specific: If you want to filter a specific protocol value with this ECE, choose this value. A field for entering a specific value appears." ::= {sispm1040582lrtECEControlListConfEntry 30 } sispm1040582lrtECECtlListConfIPv4ProtocolValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the protocol filter, you can enter a specific value. The allowed value is from 0 through 255." ::= {sispm1040582lrtECEControlListConfEntry 31 } sispm1040582lrtECECtlListConfIPv4SIPDIPFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source address. Similarly when port address mode is set to 'Destination' then the field is used for destination address. The possible values are: 0:Any: No SIP/DIP filter is specified. (SIP/DIP filter status is don't-care.) 1:Host: When IPv4 is selected for the Frame Type, if you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. 2:Network: When IPv4 is selected for the Frame Type, if you want to filter a specific network address with this ECE, choose this value. Two fields for entering a specific network address and network mask appears. " ::= {sispm1040582lrtECEControlListConfEntry 32 } sispm1040582lrtECECtlListConfIPv4SIPDIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When IPv4 is selected for the Frame Type and Host or Network is selected for the SIP/DIP filter, you can enter a specific host or network address. " ::= {sispm1040582lrtECEControlListConfEntry 33 } sispm1040582lrtECECtlListConfIPv4SIPDIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When IPv4 is selected for the Frame Type and Host or Network is selected for the SIP/DIP filter, you can enter a specific network mask. " ::= {sispm1040582lrtECEControlListConfEntry 34 } sispm1040582lrtECECtlListConfIPv4DSCPFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The DSCP filter for matching the ECE. The possible values are: 0:Any: No DSCP filter is specified. (DSCP filter status is don't-care.) 1:Specific: If you want to filter a specific DSCP value with this ECE, choose this value. A field for entering a specific value appears. 2:Range: If you want to filter a specific DSCP range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 35 } sispm1040582lrtECECtlListConfIPv4DSCPRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the DSCP filter, you can enter a specific value. The allowed value is from 0 through 63." ::= {sispm1040582lrtECEControlListConfEntry 36 } sispm1040582lrtECECtlListConfIPv4DSCPRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the DSCP filter, you can enter a specific range. The allowed range is from 0 through 63." ::= {sispm1040582lrtECEControlListConfEntry 37 } sispm1040582lrtECECtlListConfIPv4Fragment OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IPv4 Fragment for matching the ECE. This involves the settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. The possible values are: 0:Any: The ECE will match any MF bit. 1:Non-Fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must not be able to match this entry. 2:Fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be able to match this entry." ::= {sispm1040582lrtECEControlListConfEntry 38 } sispm1040582lrtECECtlListConfIPv4SourcePortFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP/UDP source port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: 0:Any: No TCP/UDP source port filter is specified. (Source port filter status is don't-care.) 1:Specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value. A field for entering a specific No. appears. 2:Range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 39 } sispm1040582lrtECECtlListConfIPv4SourceRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the source port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 40 } sispm1040582lrtECECtlListConfIPv4SourceRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the source port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 41 } sispm1040582lrtECECtlListConfIPv4DestPortFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP/UDP destination port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: 0:Any: No TCP/UDP destination port filter is specified. (Destination port filter status is don't-care.) 1:Specific: If you want to filter a specific TCP/UDP destination port No. with this ECE, choose this value. A field for entering a specific No. appears. 2:Range: If you want to filter a specific TCP/UDP destination port range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 42 } sispm1040582lrtECECtlListConfIPv4DestRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the destination port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 43 } sispm1040582lrtECECtlListConfIPv4DestRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the destination port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 44 } sispm1040582lrtECECtlListConfIPv6Protocol OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The IP protocol for matching the ECE. The possible values are: 0:Any: No protocol filter is specified. (Protocol filter status is don't-care.) 1:UDP: Specify the UDP for matching the ECE. 2:TCP: Specify the TCP for matching the ECE. 3:Specific: If you want to filter a specific protocol value with this ECE, choose this value. A field for entering a specific value appears." ::= {sispm1040582lrtECEControlListConfEntry 45 } sispm1040582lrtECECtlListConfIPv6ProtocolValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Specific is selected for the protocol filter, you can enter a specific value. The allowed value is from 0 through 255." ::= {sispm1040582lrtECEControlListConfEntry 46 } sispm1040582lrtECECtlListConfIPv6SIPDIPFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source address. Similarly when port address mode is set to 'Destination' then the field is used for destination address. The possible values are: 0:Any: No SIP/DIP filter is specified. (SIP/DIP filter status is don't-care.) 1:Specific: When IPv6 is selected for the Frame Type, if you want to filter a specific network address with this ECE, choose this value. Two fields for entering a specific network address and network mask appears." ::= {sispm1040582lrtECEControlListConfEntry 47 } sispm1040582lrtECECtlListConfIPv6SIPDIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When IPv6 is selected for the Frame Type, the field only supported 32 bits for IPv6 address." ::= {sispm1040582lrtECEControlListConfEntry 48 } sispm1040582lrtECECtlListConfIPv6SIPDIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "When IPv6 is selected for the Frame Type, the field only supported 32 bits for IPv6 mask." ::= {sispm1040582lrtECEControlListConfEntry 49 } sispm1040582lrtECECtlListConfIPv6DSCPFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The DSCP filter for matching the ECE. The possible values are: 0:Any: No DSCP filter is specified. (DSCP filter status is don't-care.) 1:Specific: If you want to filter a specific DSCP value with this ECE, choose this value. A field for entering a specific value appears. 2:Range: If you want to filter a specific DSCP range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 50 } sispm1040582lrtECECtlListConfIPv6DSCPRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the DSCP filter, you can enter a specific range. The allowed range is from 0 through 63." ::= {sispm1040582lrtECEControlListConfEntry 51 } sispm1040582lrtECECtlListConfIPv6DSCPRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the DSCP filter, you can enter a specific range. The allowed range is from 0 through 63." ::= {sispm1040582lrtECEControlListConfEntry 52 } sispm1040582lrtECECtlListConfIPv6SourcePortFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP/UDP source port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: 0:Any: No TCP/UDP source port filter is specified. (Source port filter status is don't-care.) 1:Specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value. A field for entering a specific No. appears. 2:Range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 53 } sispm1040582lrtECECtlListConfIPv6SourceRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the source port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 54 } sispm1040582lrtECECtlListConfIPv6SourceRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the source port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 55 } sispm1040582lrtECECtlListConfIPv6DestPortFilter OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The TCP/UDP destination port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: 0:Any: No TCP/UDP destination port filter is specified. (Destination port filter status is don't-care.) 1:Specific: If you want to filter a specific TCP/UDP destination port No. with this ECE, choose this value. A field for entering a specific No. appears. 2:Range: If you want to filter a specific TCP/UDP destination port range filter with this ECE, choose this value. A field for entering a range appears." ::= {sispm1040582lrtECEControlListConfEntry 56 } sispm1040582lrtECECtlListConfIPv6DestRangeLow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the destination port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 57 } sispm1040582lrtECECtlListConfIPv6DestRangeHigh OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "When Range is selected for the destination port filter, you can enter a specific range. The allowed range is from 0 through 65535." ::= {sispm1040582lrtECEControlListConfEntry 58 } sispm1040582lrtECECtlListConfEgressOuterTagMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The outer tag for nni-to-uni direction for the ECE. The possible values are: 1:Enable: Enable outer tag for nni-to-uni direction for the ECE. 0:Disable: Disable outer tag for nni-to-uni direction for the ECE." ::= {sispm1040582lrtECEControlListConfEntry 59 } sispm1040582lrtECECtlListConfEgressOuterTagPCPDEIPresv OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The outer tag PCP and DEI preservation for the ECE. The possible values are: 1:Preserved: The outer tag PCP and DEI is preserved. 0:Fixed: The outer tag PCP and DEI is fixed." ::= {sispm1040582lrtECEControlListConfEntry 61 } sispm1040582lrtECECtlListConfEgressOuterTagPCP OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The outer tag PCP value for the ECE. The allowed range is from 0 through 7." ::= {sispm1040582lrtECEControlListConfEntry 62 } sispm1040582lrtECECtlListConfEgressOuterTagDEI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The outer tag DEI value for the ECE. The allowed value is 0 or 1." ::= {sispm1040582lrtECEControlListConfEntry 63 } sispm1040582lrtECECtlListConfConflict OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hardware status of the specific ECE. The specific ECE is not applied to the hardware due to hardware limitations. 0:No 1:Yes" ::= {sispm1040582lrtECEControlListConfEntry 69 } sispm1040582lrtECECtlListConfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ECE Control List Conf Row Status." ::= {sispm1040582lrtECEControlListConfEntry 70 } sispm1040582lrtEVCStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEVCStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of EVC Statistics." ::= { sispm1040582lrtEVC 5 } sispm1040582lrtEVCStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEVCStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of EVC Statistics table." INDEX { sispm1040582lrtEVCStatisticsPort, sispm1040582lrtEVCStatisticsClass} ::= { sispm1040582lrtEVCStatisticsTable 1 } SISPM1040582LRTEVCStatisticsEntry ::= SEQUENCE { sispm1040582lrtEVCStatisticsPort Integer32, sispm1040582lrtEVCStatisticsClass Integer32, sispm1040582lrtEVCStatisticsGreenFramesRx Integer32, sispm1040582lrtEVCStatisticsGreenFramesTx Integer32, sispm1040582lrtEVCStatisticsYellowFramesRx Integer32, sispm1040582lrtEVCStatisticsYellowFramesTx Integer32, sispm1040582lrtEVCStatisticsRedFramesRx Integer32, sispm1040582lrtEVCStatisticsDiscardedFramesGreen Integer32, sispm1040582lrtEVCStatisticsDiscardedFramesYellow Integer32 } sispm1040582lrtEVCStatisticsPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Index" ::= {sispm1040582lrtEVCStatisticsEntry 1 } sispm1040582lrtEVCStatisticsClass OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Class Index, from 1-8" ::= {sispm1040582lrtEVCStatisticsEntry 2 } sispm1040582lrtEVCStatisticsGreenFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of green received." ::= {sispm1040582lrtEVCStatisticsEntry 3 } sispm1040582lrtEVCStatisticsGreenFramesTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of green transmitted." ::= {sispm1040582lrtEVCStatisticsEntry 4 } sispm1040582lrtEVCStatisticsYellowFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of yellow received." ::= {sispm1040582lrtEVCStatisticsEntry 5 } sispm1040582lrtEVCStatisticsYellowFramesTx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of yellow transmitted." ::= {sispm1040582lrtEVCStatisticsEntry 6 } sispm1040582lrtEVCStatisticsRedFramesRx OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of red received." ::= {sispm1040582lrtEVCStatisticsEntry 7 } sispm1040582lrtEVCStatisticsDiscardedFramesGreen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded in the green color." ::= {sispm1040582lrtEVCStatisticsEntry 8 } sispm1040582lrtEVCStatisticsDiscardedFramesYellow OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of discarded in the yellow color." ::= {sispm1040582lrtEVCStatisticsEntry 9 } sispm1040582lrtEVCStatisticsClearTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTEVCStatisticsClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of EVC Statistics Clear." ::= { sispm1040582lrtEVC 6 } sispm1040582lrtEVCStatisticsClearEntry OBJECT-TYPE SYNTAX SISPM1040582LRTEVCStatisticsClearEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of EVC Statistics Clear table." INDEX { sispm1040582lrtEVCStatisticsClearPort} ::= { sispm1040582lrtEVCStatisticsClearTable 1 } SISPM1040582LRTEVCStatisticsClearEntry ::= SEQUENCE { sispm1040582lrtEVCStatisticsClearPort Integer32, sispm1040582lrtEVCStatisticsClear Integer32 } sispm1040582lrtEVCStatisticsClearPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port Index" ::= {sispm1040582lrtEVCStatisticsClearEntry 1 } sispm1040582lrtEVCStatisticsClear OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the counters for selected ports." ::= {sispm1040582lrtEVCStatisticsClearEntry 2 } -- ======================================================================================================================= sispm1040582lrtAggregation OBJECT IDENTIFIER ::= { sispm1040582lrtConfiguration 31 } sispm1040582lrtAggregationStatic OBJECT IDENTIFIER ::= { sispm1040582lrtAggregation 1 } sispm1040582lrtAggrSourceMACAddress OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Source MAC Address" ::= { sispm1040582lrtAggregationStatic 2 } sispm1040582lrtAggrDestinationMACAddress OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Destination MAC Address" ::= { sispm1040582lrtAggregationStatic 3 } sispm1040582lrtAggrIPAddress OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "IP Address" ::= { sispm1040582lrtAggregationStatic 4 } sispm1040582lrtAggrTCPUDPPortNumber OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "TCP/UDP Port Number" ::= { sispm1040582lrtAggregationStatic 5 } sispm1040582lrtAggrGroupConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTAggrGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtAggregationStatic 6 } sispm1040582lrtAggrGroupConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTAggrGroupConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtAggrGroupConfigPort } ::= { sispm1040582lrtAggrGroupConfigTable 1 } SISPM1040582LRTAggrGroupConfigEntry ::= SEQUENCE { sispm1040582lrtAggrGroupConfigPort Integer32, sispm1040582lrtAggrGroupConfigGroup Integer32, sispm1040582lrtAggrGroupConfig Integer32 } sispm1040582lrtAggrGroupConfigPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "port index" ::= { sispm1040582lrtAggrGroupConfigEntry 1 } sispm1040582lrtAggrGroupConfigGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "group index" ::= { sispm1040582lrtAggrGroupConfigEntry 2 } sispm1040582lrtAggrGroupConfig OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "Aggregation Group Configuration" ::= { sispm1040582lrtAggrGroupConfigEntry 3 } sispm1040582lrtAggrGroupStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTAggrGroupStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtAggregation 2 } sispm1040582lrtAggrGroupStateEntry OBJECT-TYPE SYNTAX SISPM1040582LRTAggrGroupStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtAggrGroupStateIndex } ::= { sispm1040582lrtAggrGroupStateTable 1 } SISPM1040582LRTAggrGroupStateEntry ::= SEQUENCE { sispm1040582lrtAggrGroupStateIndex Integer32, sispm1040582lrtAggrGroupStateAggrID DisplayString, sispm1040582lrtAggrGroupStateName DisplayString, sispm1040582lrtAggrGroupStateType DisplayString, sispm1040582lrtAggrGroupStateSpeed DisplayString, sispm1040582lrtAggrGroupStateConfiguredPorts DisplayString, sispm1040582lrtAggrGroupStateAggregatedPorts DisplayString, sispm1040582lrtAggrGroupStateAggregatedBandwidth DisplayString } sispm1040582lrtAggrGroupStateIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "index" ::= { sispm1040582lrtAggrGroupStateEntry 1 } sispm1040582lrtAggrGroupStateAggrID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "AggrID" ::= { sispm1040582lrtAggrGroupStateEntry 2 } sispm1040582lrtAggrGroupStateName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name" ::= { sispm1040582lrtAggrGroupStateEntry 3 } sispm1040582lrtAggrGroupStateType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Type" ::= { sispm1040582lrtAggrGroupStateEntry 4 } sispm1040582lrtAggrGroupStateSpeed OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Speed" ::= { sispm1040582lrtAggrGroupStateEntry 5 } sispm1040582lrtAggrGroupStateConfiguredPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Configured Ports" ::= { sispm1040582lrtAggrGroupStateEntry 6 } sispm1040582lrtAggrGroupStateAggregatedPorts OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregated Ports" ::= { sispm1040582lrtAggrGroupStateEntry 7 } sispm1040582lrtAggrGroupStateAggregatedBandwidth OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Aggregated Bandwidth" ::= { sispm1040582lrtAggrGroupStateEntry 8 } -- ======================================================================================================================= sispm1040582lrtSecurity OBJECT IDENTIFIER ::= { sispm1040582lrtProductId 3 } sispm1040582lrtIPSourceGuard OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 1 } sispm1040582lrtIPSourceGuardConf OBJECT IDENTIFIER ::= { sispm1040582lrtIPSourceGuard 1 } -- RowStatus Info: createAndGo, notReady not supported. -- ======================================================================================================================= -- Textual Conventions for the SISPM1040582LRT IP Source Guard Mib -- ======================================================================================================================= -- -- sispm1040582lrtIPSourceGuard OBJECT IDENTIFIER ::= { sispm1040582lrtIPSourceGuardMIB 1 } -- sispm1040582lrtIPSourceGuardConf OBJECT IDENTIFIER ::= { sispm1040582lrtIPSourceGuard 1 } -- -- ======================================================================================================================= -- Start sispm1040582lrtIPSourceGuard group -- ======================================================================================================================= --sispm1040582lrtIPSourceGuardConf sispm1040582lrtIPSourceGuardMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Global IP Source Guard or disable the Global IP Source Guard." ::= { sispm1040582lrtIPSourceGuardConf 1 } sispm1040582lrtIPSourceGuardDynamicToStaticCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Translate all dynamic entries to static entries." DEFVAL { noAction } ::= { sispm1040582lrtIPSourceGuardConf 2 } --sispm1040582lrtIPSourceGuardPortConfigTable sispm1040582lrtIPSourceGuardPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPSourceGuardPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Source Guard Port Configuration Table. INDEX for this table is ifIndex which is equivalent to the panel port number." ::= { sispm1040582lrtIPSourceGuardConf 3 } sispm1040582lrtIPSourceGuardPortConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPSourceGuardPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Source Guard Port Configuration Entry." INDEX { ifIndex } ::= { sispm1040582lrtIPSourceGuardPortConfigTable 1 } SISPM1040582LRTIPSourceGuardPortConfigEntry ::= SEQUENCE { sispm1040582lrtIPSourceGuardPortConfigMode AdminMode, sispm1040582lrtIPSourceGuardPortMaxDynamicClients Integer32 } sispm1040582lrtIPSourceGuardPortConfigMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Specify IP Source Guard is enabled on which ports." ::= { sispm1040582lrtIPSourceGuardPortConfigEntry 2 } sispm1040582lrtIPSourceGuardPortMaxDynamicClients OBJECT-TYPE SYNTAX Integer32(0..2|99) MAX-ACCESS read-write STATUS current DESCRIPTION "Specify the maximum number of dynamic clients that can be learned on given port. default: 99 0~2: Max Dynamic clients 99:Unlimited " ::= { sispm1040582lrtIPSourceGuardPortConfigEntry 3 } --sispm1040582lrtIPSourceGuardStaticTable sispm1040582lrtIPSourceGuardStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPSourceGuardStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Source Guard Static Table." ::= { sispm1040582lrtIPSourceGuard 2 } sispm1040582lrtIPSourceGuardStaticEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPSourceGuardStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Source Guard Static Entry." INDEX { sispm1040582lrtIPSourceGuardStaticIndex } ::= { sispm1040582lrtIPSourceGuardStaticTable 1 } SISPM1040582LRTIPSourceGuardStaticEntry ::= SEQUENCE { sispm1040582lrtIPSourceGuardStaticSwitchIndex Integer32, sispm1040582lrtIPSourceGuardStaticIndex Integer32, sispm1040582lrtIPSourceGuardStaticPort Integer32, sispm1040582lrtIPSourceGuardStaticVLANId Integer32, sispm1040582lrtIPSourceGuardStaticIPAddress IpAddress, sispm1040582lrtIPSourceGuardStaticIPMask IpAddress, sispm1040582lrtIPSourceGuardStaticMACAddress DisplayString, sispm1040582lrtIPSourceGuardStaticRowStatus RowStatus } sispm1040582lrtIPSourceGuardStaticSwitchIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch Index." ::= { sispm1040582lrtIPSourceGuardStaticEntry 1 } sispm1040582lrtIPSourceGuardStaticIndex OBJECT-TYPE SYNTAX Integer32(1..28) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of table." ::= { sispm1040582lrtIPSourceGuardStaticEntry 2 } sispm1040582lrtIPSourceGuardStaticPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The port number of table. range: 1 - port number." ::= { sispm1040582lrtIPSourceGuardStaticEntry 3 } sispm1040582lrtIPSourceGuardStaticVLANId OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "VLAN ID, range: 1 - 4095." ::= { sispm1040582lrtIPSourceGuardStaticEntry 4 } sispm1040582lrtIPSourceGuardStaticIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address allowed for doing IP source guard." ::= { sispm1040582lrtIPSourceGuardStaticEntry 5 } sispm1040582lrtIPSourceGuardStaticIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP Mask allowed for doing IP source guard." ::= { sispm1040582lrtIPSourceGuardStaticEntry 6 } sispm1040582lrtIPSourceGuardStaticMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Allowed Source MAC address, format: 0a 1b 2c 3d 4e 5f." ::= { sispm1040582lrtIPSourceGuardStaticEntry 7 } sispm1040582lrtIPSourceGuardStaticRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtIPSourceGuardStaticEntry 8 } --sispm1040582lrtIPSourceGuardDynamicTable sispm1040582lrtIPSourceGuardDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTIPSourceGuardDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Source Guard Dynamic Table." ::= { sispm1040582lrtIPSourceGuard 3 } sispm1040582lrtIPSourceGuardDynamicEntry OBJECT-TYPE SYNTAX SISPM1040582LRTIPSourceGuardDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP Source Guard Dynamic Entry." INDEX { sispm1040582lrtIPSourceGuardDynamicIndex } ::= { sispm1040582lrtIPSourceGuardDynamicTable 1 } SISPM1040582LRTIPSourceGuardDynamicEntry ::= SEQUENCE { sispm1040582lrtIPSourceGuardDynamicSwitchIndex Integer32, sispm1040582lrtIPSourceGuardDynamicIndex Integer32, sispm1040582lrtIPSourceGuardDynamicPort Integer32, sispm1040582lrtIPSourceGuardDynamicVLANId Integer32, sispm1040582lrtIPSourceGuardDynamicIPAddress IpAddress, sispm1040582lrtIPSourceGuardDynamicMACAddress DisplayString } sispm1040582lrtIPSourceGuardDynamicSwitchIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch Index." ::= { sispm1040582lrtIPSourceGuardDynamicEntry 1 } sispm1040582lrtIPSourceGuardDynamicIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of table." ::= { sispm1040582lrtIPSourceGuardDynamicEntry 2 } sispm1040582lrtIPSourceGuardDynamicPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The logical port for the settings." ::= { sispm1040582lrtIPSourceGuardDynamicEntry 3 } sispm1040582lrtIPSourceGuardDynamicVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The vlan id for the settings." ::= { sispm1040582lrtIPSourceGuardDynamicEntry 4 } sispm1040582lrtIPSourceGuardDynamicIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Allowed Source IP address." ::= { sispm1040582lrtIPSourceGuardDynamicEntry 5 } sispm1040582lrtIPSourceGuardDynamicMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Allowed Source MAC address." ::= { sispm1040582lrtIPSourceGuardDynamicEntry 6 } -- ======================================================================================================================= sispm1040582lrtARPInspection OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 2 } -- RowStatus Info: createAndGo, notReady not supported. -- ======================================================================================================================= -- Textual Conventions for the sispm1040582lrt Arp Mib -- ======================================================================================================================= -- sispm1040582lrtARP OBJECT IDENTIFIER ::= { sispm1040582lrtARPInspection 1 } sispm1040582lrtARPConfig OBJECT IDENTIFIER ::= { sispm1040582lrtARP 1 } -- -- ======================================================================================================================= -- Start sispm1040582lrtARP group -- ======================================================================================================================= --sispm1040582lrtARPConfig sispm1040582lrtARPConfMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Global ARP Inspection or disable the Global ARP Inspection." ::= { sispm1040582lrtARPConfig 1 } --sispm1040582lrtARPPortConfTable sispm1040582lrtARPPortConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTARPPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Port Configuration Table." ::= { sispm1040582lrtARPConfig 3 } sispm1040582lrtARPPortConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTARPPortConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Port Configuration Entry." INDEX { sispm1040582lrtARPPortConfPort } ::= { sispm1040582lrtARPPortConfTable 1 } SISPM1040582LRTARPPortConfEntry ::= SEQUENCE { sispm1040582lrtARPPortConfPort Integer32, sispm1040582lrtARPPortConfMode AdminMode, sispm1040582lrtARPPortConfCheckVLAN AdminMode, sispm1040582lrtARPPortConfLogType INTEGER } sispm1040582lrtARPPortConfPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port number for which the configuration below applies. range: 1 - port number." ::= { sispm1040582lrtARPPortConfEntry 1 } sispm1040582lrtARPPortConfMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Specify ARP Inspection is enabled on which ports." ::= { sispm1040582lrtARPPortConfEntry 2 } sispm1040582lrtARPPortConfCheckVLAN OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "When the setting of 'Check VLAN' is disabled, the log type of ARP Inspection will refer to the port setting. And the setting of 'Check VLAN' is enabled, the log type of ARP Inspection will refer to the VLAN setting." ::= { sispm1040582lrtARPPortConfEntry 3 } sispm1040582lrtARPPortConfLogType OBJECT-TYPE SYNTAX INTEGER{none(0),deny(1),permit(2),all(3)} MAX-ACCESS read-write STATUS current DESCRIPTION "The log type of ARP Inspection will refer to the port setting. 0: none, 1: deny, 2: permit, 3: all, range: 0-3." ::= { sispm1040582lrtARPPortConfEntry 4 } --sispm1040582lrtARPVlanConfig sispm1040582lrtARPVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTARPVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Vlan Configuration Table." ::= { sispm1040582lrtARP 2 } sispm1040582lrtARPVlanConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTARPVlanConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Vlan Configuration Entry." INDEX { sispm1040582lrtARPVlanConfigVlan } ::= { sispm1040582lrtARPVlanConfigTable 1 } SISPM1040582LRTARPVlanConfigEntry ::= SEQUENCE { sispm1040582lrtARPVlanConfigVlan Integer32, sispm1040582lrtARPVlanConfigLogType INTEGER, sispm1040582lrtARPVlanConfigRowStatus RowStatus } sispm1040582lrtARPVlanConfigVlan OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specify ARP Inspection is enabled on which VLANs. range: 1 - 4095." ::= { sispm1040582lrtARPVlanConfigEntry 1 } sispm1040582lrtARPVlanConfigLogType OBJECT-TYPE SYNTAX INTEGER{none(0),deny(1),permit(2),all(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "The log type also can be configured on per VLAN setting. 0: none, 1: deny, 2: permit, 3: all, range: 0-3." ::= { sispm1040582lrtARPVlanConfigEntry 2 } sispm1040582lrtARPVlanConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtARPVlanConfigEntry 3 } --sispm1040582lrtARPStaticTable sispm1040582lrtARPStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTARPStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Static Table." ::= { sispm1040582lrtARP 3 } sispm1040582lrtARPStaticEntry OBJECT-TYPE SYNTAX SISPM1040582LRTARPStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Static Entry." INDEX { sispm1040582lrtARPStaticIndex } ::= { sispm1040582lrtARPStaticTable 1 } SISPM1040582LRTARPStaticEntry ::= SEQUENCE { sispm1040582lrtARPStaticSwitchIndex Integer32, sispm1040582lrtARPStaticIndex Integer32, sispm1040582lrtARPStaticPort Integer32, sispm1040582lrtARPStaticVlanID Integer32, sispm1040582lrtARPStaticMACAddress DisplayString, sispm1040582lrtARPStaticIPAddress IpAddress, sispm1040582lrtARPStaticRowStatus RowStatus } sispm1040582lrtARPStaticSwitchIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch Index." ::= { sispm1040582lrtARPStaticEntry 1 } sispm1040582lrtARPStaticIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of table." ::= { sispm1040582lrtARPStaticEntry 2 } sispm1040582lrtARPStaticPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The logical port for the settings. range: 1 - port number." ::= { sispm1040582lrtARPStaticEntry 3 } sispm1040582lrtARPStaticVlanID OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The vlan id for the settings. range: 1-4095." ::= { sispm1040582lrtARPStaticEntry 4 } sispm1040582lrtARPStaticMACAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Allowed Source MAC address in ARP request packets." ::= { sispm1040582lrtARPStaticEntry 5 } sispm1040582lrtARPStaticIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Allowed Source IP address in ARP request packets." ::= { sispm1040582lrtARPStaticEntry 6 } sispm1040582lrtARPStaticRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtARPStaticEntry 7 } --sispm1040582lrtARPDynamicTable sispm1040582lrtARPDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTARPDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Dynamic Table." ::= { sispm1040582lrtARP 4 } sispm1040582lrtARPDynamicEntry OBJECT-TYPE SYNTAX SISPM1040582LRTARPDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ARP Dynamic Entry." INDEX { sispm1040582lrtARPDynamicIndex } ::= { sispm1040582lrtARPDynamicTable 1 } SISPM1040582LRTARPDynamicEntry ::= SEQUENCE { sispm1040582lrtARPDynamicIndex Integer32, sispm1040582lrtARPDynamicPort Integer32, sispm1040582lrtARPDynamicVLANId Integer32, sispm1040582lrtARPDynamicMACAddress MacAddress, sispm1040582lrtARPDynamicIPAddress IpAddress, sispm1040582lrtARPDynamicToStaticCmd INTEGER } sispm1040582lrtARPDynamicIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of table." ::= { sispm1040582lrtARPDynamicEntry 1 } sispm1040582lrtARPDynamicPort OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Switch Port Number for which the entries are displayed." ::= { sispm1040582lrtARPDynamicEntry 2 } sispm1040582lrtARPDynamicVLANId OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION "VLAN-ID in which the ARP traffic is permitted." ::= { sispm1040582lrtARPDynamicEntry 3 } sispm1040582lrtARPDynamicMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "User MAC address of the entry." ::= { sispm1040582lrtARPDynamicEntry 4 } sispm1040582lrtARPDynamicIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "User IP address of the entry." ::= { sispm1040582lrtARPDynamicEntry 5 } sispm1040582lrtARPDynamicToStaticCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Enable the Global ARP Inspection or disable the Global ARP Inspection." ::= { sispm1040582lrtARPDynamicEntry 6 } -- ======================================================================================================================= -- sispm1040582lrtARPConformance -- ======================================================================================================================= sispm1040582lrtARPConformance OBJECT IDENTIFIER ::= { sispm1040582lrtARPInspection 200 } sispm1040582lrtARPCompliances OBJECT IDENTIFIER ::= { sispm1040582lrtARPConformance 1 } sispm1040582lrtARPGroups OBJECT IDENTIFIER ::= { sispm1040582lrtARPConformance 2 } sispm1040582lrtARPGroup OBJECT-GROUP OBJECTS { -- sispm1040582lrtARPConfig sispm1040582lrtARPConfMode, --sispm1040582lrtARPPortConfTable sispm1040582lrtARPPortConfMode, sispm1040582lrtARPPortConfCheckVLAN, sispm1040582lrtARPPortConfLogType, --sispm1040582lrtARPVlanConfig sispm1040582lrtARPVlanConfigLogType, sispm1040582lrtARPVlanConfigRowStatus, --sispm1040582lrtARPStaticTable sispm1040582lrtARPStaticPort, sispm1040582lrtARPStaticVlanID, sispm1040582lrtARPStaticMACAddress, sispm1040582lrtARPStaticIPAddress, sispm1040582lrtARPStaticRowStatus, --sispm1040582lrtARPDynamicTable sispm1040582lrtARPDynamicPort, sispm1040582lrtARPDynamicVLANId, sispm1040582lrtARPDynamicMACAddress, sispm1040582lrtARPDynamicIPAddress, sispm1040582lrtARPDynamicToStaticCmd } STATUS current DESCRIPTION "The collection of objects which are used to indicate sispm1040582lrt ARP information." ::= { sispm1040582lrtARPGroups 1 } -- ======================================================================================================================= sispm1040582lrtDHCPSnooping OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 3 } sispm1040582lrtDHCPSnoopingConf OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPSnooping 1 } sispm1040582lrtDHCPSnoopingMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { sispm1040582lrtDHCPSnoopingConf 1 } sispm1040582lrtDHCPSnoopingPortModeConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTDHCPSnoopingPortModeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingConf 2 } sispm1040582lrtDHCPSnoopingPortModeConfigurationEntry OBJECT-TYPE SYNTAX SISPM1040582LRTDHCPSnoopingPortModeConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtDHCPSnoopingPortModeConfigurationPort } ::= { sispm1040582lrtDHCPSnoopingPortModeConfigurationTable 1 } SISPM1040582LRTDHCPSnoopingPortModeConfigurationEntry ::= SEQUENCE { sispm1040582lrtDHCPSnoopingPortModeConfigurationPort Integer32, sispm1040582lrtDHCPSnoopingPortModeConfigurationMode Integer32 } sispm1040582lrtDHCPSnoopingPortModeConfigurationPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingPortModeConfigurationEntry 1 } sispm1040582lrtDHCPSnoopingPortModeConfigurationMode OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 1 0: trust port mode 1: untrust port mode" ::= { sispm1040582lrtDHCPSnoopingPortModeConfigurationEntry 2 } sispm1040582lrtDHCPSnoopingStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTDHCPSnoopingStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnooping 2 } sispm1040582lrtDHCPSnoopingStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTDHCPSnoopingStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtDHCPSnoopingStatisticsPort } ::= { sispm1040582lrtDHCPSnoopingStatisticsTable 1 } SISPM1040582LRTDHCPSnoopingStatisticsEntry ::= SEQUENCE { sispm1040582lrtDHCPSnoopingStatisticsPort Integer32, sispm1040582lrtDHCPSnoopingStatisticsClear Integer32, sispm1040582lrtDHCPSnoopingRxDiscover Counter32, sispm1040582lrtDHCPSnoopingRxOffer Counter32, sispm1040582lrtDHCPSnoopingRxRequest Counter32, sispm1040582lrtDHCPSnoopingRxDecline Counter32, sispm1040582lrtDHCPSnoopingRxACK Counter32, sispm1040582lrtDHCPSnoopingRxNAK Counter32, sispm1040582lrtDHCPSnoopingRxRelease Counter32, sispm1040582lrtDHCPSnoopingRxInform Counter32, sispm1040582lrtDHCPSnoopingRxLeaseQuery Counter32, sispm1040582lrtDHCPSnoopingRxLeaseUnassigned Counter32, sispm1040582lrtDHCPSnoopingRxLeaseUnknown Counter32, sispm1040582lrtDHCPSnoopingRxLeaseActive Counter32, sispm1040582lrtDHCPSnoopingTxDiscover Counter32, sispm1040582lrtDHCPSnoopingTxOffer Counter32, sispm1040582lrtDHCPSnoopingTxRequest Counter32, sispm1040582lrtDHCPSnoopingTxDecline Counter32, sispm1040582lrtDHCPSnoopingTxACK Counter32, sispm1040582lrtDHCPSnoopingTxNAK Counter32, sispm1040582lrtDHCPSnoopingTxRelease Counter32, sispm1040582lrtDHCPSnoopingTxInform Counter32, sispm1040582lrtDHCPSnoopingTxLeaseQuery Counter32, sispm1040582lrtDHCPSnoopingTxLeaseUnassigned Counter32, sispm1040582lrtDHCPSnoopingTxLeaseUnknown Counter32, sispm1040582lrtDHCPSnoopingTxLeaseActive Counter32, sispm1040582lrtDHCPSnoopingRxDiscardedChecksumError Counter32, sispm1040582lrtDHCPSnoopingRxDiscardedFromUntrusted Counter32 } sispm1040582lrtDHCPSnoopingStatisticsPort OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 1 } sispm1040582lrtDHCPSnoopingStatisticsClear OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: clear" ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 2 } sispm1040582lrtDHCPSnoopingRxDiscover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 3 } sispm1040582lrtDHCPSnoopingRxOffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 4 } sispm1040582lrtDHCPSnoopingRxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 5 } sispm1040582lrtDHCPSnoopingRxDecline OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 6 } sispm1040582lrtDHCPSnoopingRxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 7 } sispm1040582lrtDHCPSnoopingRxNAK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 8 } sispm1040582lrtDHCPSnoopingRxRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 9 } sispm1040582lrtDHCPSnoopingRxInform OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 10 } sispm1040582lrtDHCPSnoopingRxLeaseQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 11 } sispm1040582lrtDHCPSnoopingRxLeaseUnassigned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 12 } sispm1040582lrtDHCPSnoopingRxLeaseUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 13 } sispm1040582lrtDHCPSnoopingRxLeaseActive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 14 } sispm1040582lrtDHCPSnoopingTxDiscover OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 15 } sispm1040582lrtDHCPSnoopingTxOffer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 16 } sispm1040582lrtDHCPSnoopingTxRequest OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 17 } sispm1040582lrtDHCPSnoopingTxDecline OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 18 } sispm1040582lrtDHCPSnoopingTxACK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 19 } sispm1040582lrtDHCPSnoopingTxNAK OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 20 } sispm1040582lrtDHCPSnoopingTxRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 21 } sispm1040582lrtDHCPSnoopingTxInform OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 22 } sispm1040582lrtDHCPSnoopingTxLeaseQuery OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 23 } sispm1040582lrtDHCPSnoopingTxLeaseUnassigned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 24 } sispm1040582lrtDHCPSnoopingTxLeaseUnknown OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 25 } sispm1040582lrtDHCPSnoopingTxLeaseActive OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 26 } sispm1040582lrtDHCPSnoopingRxDiscardedChecksumError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 27 } sispm1040582lrtDHCPSnoopingRxDiscardedFromUntrusted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPSnoopingStatisticsEntry 28 } sispm1040582lrtDHCPRelay OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 4 } sispm1040582lrtDHCPRelayConfiguration OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPRelay 1 } sispm1040582lrtDHCPRelayMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable We need at least one server" ::= { sispm1040582lrtDHCPRelayConfiguration 1 } sispm1040582lrtDHCPRelayServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayConfiguration 2 } sispm1040582lrtDHCPRelayInformationMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { sispm1040582lrtDHCPRelayConfiguration 3 } sispm1040582lrtDHCPRelayInformationPolicy OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: replace 1: keep 2: drop " ::= { sispm1040582lrtDHCPRelayConfiguration 4 } sispm1040582lrtDHCPRelayStatistics OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPRelay 2 } sispm1040582lrtDHCPRelayServerStatistics OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPRelayStatistics 1 } sispm1040582lrtServerStatTransmitToServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 1 } sispm1040582lrtServerStatTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 2 } sispm1040582lrtServerStatReceiveFromServer OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 3 } sispm1040582lrtServerStatReceiveMissingAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 4 } sispm1040582lrtServerStatReceiveMissingCircuitID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 5 } sispm1040582lrtServerStatReceiveMissingRemoteID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 6 } sispm1040582lrtServerStatReceiveBadCircuitID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 7 } sispm1040582lrtServerStatReceiveBadRemoteID OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayServerStatistics 8 } sispm1040582lrtDHCPRelayClientStatistics OBJECT IDENTIFIER ::= { sispm1040582lrtDHCPRelayStatistics 2 } sispm1040582lrtClientStatTransmitToClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 1 } sispm1040582lrtClientStatTransmitError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 2 } sispm1040582lrtClientStatReceivefromClient OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 3 } sispm1040582lrtClientStatReceiveAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 4 } sispm1040582lrtClientStatReplaceAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 5 } sispm1040582lrtClientStatKeepAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 6 } sispm1040582lrtClientStatDropAgentOption OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtDHCPRelayClientStatistics 7 } sispm1040582lrtPortSecurity OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 5 } sispm1040582lrtPortSecLimitCtrl OBJECT IDENTIFIER ::= { sispm1040582lrtPortSecurity 1 } sispm1040582lrtPortSecLimitCtrlSystemConf OBJECT IDENTIFIER ::= { sispm1040582lrtPortSecLimitCtrl 1 } sispm1040582lrtPortSecurityMode OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { sispm1040582lrtPortSecLimitCtrlSystemConf 1 } sispm1040582lrtPortSecurityAging OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable " ::= { sispm1040582lrtPortSecLimitCtrlSystemConf 2 } sispm1040582lrtPortSecurityAgingPeriod OBJECT-TYPE SYNTAX Integer32(10..10000000) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 3600, range: 10-10000000 " ::= { sispm1040582lrtPortSecLimitCtrlSystemConf 3 } sispm1040582lrtPortSecLimitCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPortSecLimitCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecLimitCtrl 2 } sispm1040582lrtPortSecLimitCtrlEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPortSecLimitCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPortSecLimitCtrlPort } ::= { sispm1040582lrtPortSecLimitCtrlTable 1 } SISPM1040582LRTPortSecLimitCtrlEntry ::= SEQUENCE { sispm1040582lrtPortSecLimitCtrlPort Integer32, sispm1040582lrtPortSecLimitCtrlPortMode Integer32, sispm1040582lrtPortSecLimitCtrlPortLimit Integer32, sispm1040582lrtPortSecLimitCtrlPortAction Integer32, sispm1040582lrtPortSecLimitCtrlPortState DisplayString, sispm1040582lrtPortSecLimitCtrlPortReOpen Integer32, sispm1040582lrtPortSecLimitCtrlPortSticky Integer32, sispm1040582lrtPortSecLimitCtrlPortClear Integer32 } sispm1040582lrtPortSecLimitCtrlPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecLimitCtrlEntry 1 } sispm1040582lrtPortSecLimitCtrlPortMode OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { sispm1040582lrtPortSecLimitCtrlEntry 2 } sispm1040582lrtPortSecLimitCtrlPortLimit OBJECT-TYPE SYNTAX Integer32(1..1024) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 4, range: 1-1024" ::= { sispm1040582lrtPortSecLimitCtrlEntry 3 } sispm1040582lrtPortSecLimitCtrlPortAction OBJECT-TYPE SYNTAX Integer32(0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: trap 2: shutdown 3: trap&shutdown" ::= { sispm1040582lrtPortSecLimitCtrlEntry 4 } sispm1040582lrtPortSecLimitCtrlPortState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecLimitCtrlEntry 5 } sispm1040582lrtPortSecLimitCtrlPortReOpen OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: none 1: reopen" ::= { sispm1040582lrtPortSecLimitCtrlEntry 6 } sispm1040582lrtPortSecLimitCtrlPortSticky OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: disable 1: enable" ::= { sispm1040582lrtPortSecLimitCtrlEntry 7 } sispm1040582lrtPortSecLimitCtrlPortClear OBJECT-TYPE SYNTAX Integer32 (0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 1: clear" ::= { sispm1040582lrtPortSecLimitCtrlEntry 8 } sispm1040582lrtPortSecSwitchStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPortSecSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecurity 2 } sispm1040582lrtPortSecSwitchStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPortSecSwitchStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPortSecSwitchStatusPort } ::= { sispm1040582lrtPortSecSwitchStatusTable 1 } SISPM1040582LRTPortSecSwitchStatusEntry ::= SEQUENCE { sispm1040582lrtPortSecSwitchStatusPort Integer32, sispm1040582lrtPortSecSwitchStatusUsers DisplayString, sispm1040582lrtPortSecSwitchStatusState DisplayString, sispm1040582lrtPortSecSwitchStatusMACCountCurrent Integer32, sispm1040582lrtPortSecSwitchStatusMACCountLimit Integer32 } sispm1040582lrtPortSecSwitchStatusPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecSwitchStatusEntry 1 } sispm1040582lrtPortSecSwitchStatusUsers OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Users Abbr: L = Limit Control, 8 = 802.1X, D = DHCP Snooping, V = Voice VLAN, '-' means that the corresponding user module is not enabled. " ::= { sispm1040582lrtPortSecSwitchStatusEntry 2 } sispm1040582lrtPortSecSwitchStatusState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Shows the current state of the port : Disabled, Ready, Limit Reached, Shutdown. " ::= { sispm1040582lrtPortSecSwitchStatusEntry 3 } sispm1040582lrtPortSecSwitchStatusMACCountCurrent OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecSwitchStatusEntry 4 } sispm1040582lrtPortSecSwitchStatusMACCountLimit OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecSwitchStatusEntry 5 } sispm1040582lrtPortSecPortStatus OBJECT IDENTIFIER ::= { sispm1040582lrtPortSecurity 3 } sispm1040582lrtPortSecPortStatusPort OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "port number default: 1 range: 1 - port number." ::= { sispm1040582lrtPortSecPortStatus 1 } sispm1040582lrtPortSecPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTPortSecPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecPortStatus 2 } sispm1040582lrtPortSecPortStatusEntry OBJECT-TYPE SYNTAX SISPM1040582LRTPortSecPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtPortSecPortStatusIndex } ::= { sispm1040582lrtPortSecPortStatusTable 1 } SISPM1040582LRTPortSecPortStatusEntry ::= SEQUENCE { sispm1040582lrtPortSecPortStatusIndex Integer32, sispm1040582lrtPortSecPortStatusMACAddress MacAddress, sispm1040582lrtPortSecPortStatusVLANId Integer32, sispm1040582lrtPortSecPortStatusState DisplayString, sispm1040582lrtPortSecPortStatusTimeOfAddition DisplayString, sispm1040582lrtPortSecPortStatusAgeAndHold DisplayString } sispm1040582lrtPortSecPortStatusIndex OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecPortStatusEntry 1 } sispm1040582lrtPortSecPortStatusMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecPortStatusEntry 2 } sispm1040582lrtPortSecPortStatusVLANId OBJECT-TYPE SYNTAX Integer32(1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecPortStatusEntry 3 } sispm1040582lrtPortSecPortStatusState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked / Forwarding " ::= { sispm1040582lrtPortSecPortStatusEntry 4 } sispm1040582lrtPortSecPortStatusTimeOfAddition OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecPortStatusEntry 5 } sispm1040582lrtPortSecPortStatusAgeAndHold OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { sispm1040582lrtPortSecPortStatusEntry 6 } sispm1040582lrtAccessManagement OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 6 } sispm1040582lrtAccessMgmtConf OBJECT IDENTIFIER ::= { sispm1040582lrtAccessManagement 1 } sispm1040582lrtAccessMgmtStatistics OBJECT IDENTIFIER ::= { sispm1040582lrtAccessManagement 2 } -- -- ======================================================================================================================= -- Start sispm1040582lrtAccessManagement group -- ======================================================================================================================= --sispm1040582lrtAccessMgmtConf sispm1040582lrtAccessMgmtConfMode OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the access management mode operation." DEFVAL { disable } ::= { sispm1040582lrtAccessMgmtConf 1 } --sispm1040582lrtAccessMgmtConfTable sispm1040582lrtAccessMgmtConfTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTAccessMgmtConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Mgmt Conf Table. " ::= { sispm1040582lrtAccessMgmtConf 2 } sispm1040582lrtAccessMgmtConfEntry OBJECT-TYPE SYNTAX SISPM1040582LRTAccessMgmtConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Mgmt Conf Entry " INDEX { sispm1040582lrtAccessMgmtIndex } ::= { sispm1040582lrtAccessMgmtConfTable 1 } SISPM1040582LRTAccessMgmtConfEntry ::= SEQUENCE { sispm1040582lrtAccessMgmtIndex Integer32, sispm1040582lrtAccessMgmtVlanID Integer32, sispm1040582lrtAccessMgmtStartIpAddress IpAddress, sispm1040582lrtAccessMgmtEndIpAddress IpAddress, sispm1040582lrtAccessMgmtHttpHttps AdminMode, sispm1040582lrtAccessMgmtSNMP AdminMode, sispm1040582lrtAccessMgmtTelnetSSH AdminMode, sispm1040582lrtAccessMgmtRowStatus RowStatus } sispm1040582lrtAccessMgmtIndex OBJECT-TYPE SYNTAX Integer32(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Management config index. range : 1-16." ::= { sispm1040582lrtAccessMgmtConfEntry 1 } sispm1040582lrtAccessMgmtVlanID OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID for the access management entry. range: 1-4095." ::= { sispm1040582lrtAccessMgmtConfEntry 2 } sispm1040582lrtAccessMgmtStartIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The start IP address for the access management entry." ::= { sispm1040582lrtAccessMgmtConfEntry 3 } sispm1040582lrtAccessMgmtEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The end IP address for the access management entry. " ::= { sispm1040582lrtAccessMgmtConfEntry 4 } sispm1040582lrtAccessMgmtHttpHttps OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the host can access the switch from HTTP/HTTPS interface if the host IP address matches the IP address range provided in the entry." DEFVAL { disable } ::= { sispm1040582lrtAccessMgmtConfEntry 5 } sispm1040582lrtAccessMgmtSNMP OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the host can access the switch from SNMP interface if the host IP address matches the IP address range provided in the entry." DEFVAL { disable } ::= { sispm1040582lrtAccessMgmtConfEntry 6 } sispm1040582lrtAccessMgmtTelnetSSH OBJECT-TYPE SYNTAX AdminMode MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates that the host can access the switch from TELNET/SSH interface if the host IP address matches the IP address range provided in the entry." DEFVAL { disable } ::= { sispm1040582lrtAccessMgmtConfEntry 7 } sispm1040582lrtAccessMgmtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding instance of this object is active(1). createAndGo, notReady not supported." ::= { sispm1040582lrtAccessMgmtConfEntry 8 } --sispm1040582lrtAccessMgmtStatistics sispm1040582lrtAccessMgmtStatisticsClear OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Clear all statistics." ::= { sispm1040582lrtAccessMgmtStatistics 1 } --sispm1040582lrtAccessMgmtStatisticsTable sispm1040582lrtAccessMgmtStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTAccessMgmtStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Mgmt Statistics Table. " ::= { sispm1040582lrtAccessMgmtStatistics 2 } sispm1040582lrtAccessMgmtStatisticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTAccessMgmtStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Mgmt Statistics Entry. " INDEX { sispm1040582lrtAccessMgmtStatisticsInterface } ::= { sispm1040582lrtAccessMgmtStatisticsTable 1 } SISPM1040582LRTAccessMgmtStatisticsEntry ::= SEQUENCE { sispm1040582lrtAccessMgmtStatisticsInterface INTEGER, sispm1040582lrtAccessMgmtStatisticsReceivedPackets Integer32, sispm1040582lrtAccessMgmtStatisticsAllowedPackets Integer32, sispm1040582lrtAccessMgmtStatisticsDiscardedPackets Integer32 } sispm1040582lrtAccessMgmtStatisticsInterface OBJECT-TYPE SYNTAX INTEGER { http(1), https(2), snmp(3), telnet(4), ssh (5) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface type through which the remote host can access the switch. 1: HTTP, 2: HTTPs, 3: SNMP, 4: TELNET, 5: SSH" ::= { sispm1040582lrtAccessMgmtStatisticsEntry 1 } sispm1040582lrtAccessMgmtStatisticsReceivedPackets OBJECT-TYPE SYNTAX Integer32(1..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received packets from the interface when access management mode is enabled. " ::= { sispm1040582lrtAccessMgmtStatisticsEntry 2 } sispm1040582lrtAccessMgmtStatisticsAllowedPackets OBJECT-TYPE SYNTAX Integer32(1..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of allowed packets from the interface when access management mode is enabled. " ::= { sispm1040582lrtAccessMgmtStatisticsEntry 3 } sispm1040582lrtAccessMgmtStatisticsDiscardedPackets OBJECT-TYPE SYNTAX Integer32(1..10000000) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of discarded packets from the interface when access management mode is enabled. " ::= { sispm1040582lrtAccessMgmtStatisticsEntry 4 } -- ======================================================================================================================= --sispm1040582lrtSSH OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 7 } -- --sispm1040582lrtSSHMode OBJECT-TYPE -- SYNTAX Integer32(0|1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 1 -- 0: disable -- 1: enable" -- ::= { sispm1040582lrtSSH 1 } -- --sispm1040582lrtSSHPort OBJECT-TYPE -- SYNTAX Integer32(1..65534) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "SSH service port number. -- range : 1-65534, default : 22." -- ::= { sispm1040582lrtSSH 2 } sispm1040582lrtHTTPS OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 8 } --sispm1040582lrtHTTPSMode OBJECT-TYPE -- SYNTAX Integer32(0|1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 1 -- 0: disable -- 1: enable" -- ::= { sispm1040582lrtHTTPS 1 } -- --sispm1040582lrtHTTPSAutoRedirect OBJECT-TYPE -- SYNTAX Integer32(0|1) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "default: 0 -- 0: disable -- 1: enable" -- ::= { sispm1040582lrtHTTPS 2 } -- --sispm1040582lrtHTTPSPort OBJECT-TYPE -- SYNTAX Integer32(1..65534) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "HTTPS service port number. -- range : 1-65534, default : 443." -- ::= { sispm1040582lrtHTTPS 3 } sispm1040582lrtHTTPSCertificateMaintain OBJECT-TYPE SYNTAX Integer32(2..3) MAX-ACCESS read-write STATUS current DESCRIPTION "2: Upload 3: Generate" ::= { sispm1040582lrtHTTPS 4 } sispm1040582lrtHTTPSCertificatePassPhrase OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Enter the pass phrase in this field if your uploading certificate is protected by a specific passphrase." ::= { sispm1040582lrtHTTPS 5 } sispm1040582lrtHTTPSCertificateUpload OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "default: 0 0: TFTP 1: URL" ::= { sispm1040582lrtHTTPS 6 } sispm1040582lrtHTTPSFileUploadFileURL OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "TFTP: filename URL: URL" ::= { sispm1040582lrtHTTPS 7 } sispm1040582lrtHTTPSFileUploadTFTPServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "TFTP server IP address" ::= { sispm1040582lrtHTTPS 8 } sispm1040582lrtHTTPSApply OBJECT-TYPE SYNTAX Integer32(0|1) MAX-ACCESS read-write STATUS current DESCRIPTION "1: apply the above https settings" ::= { sispm1040582lrtHTTPS 9 } sispm1040582lrtHTTPSCertificateStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Display the current status of certificate on the switch." ::= { sispm1040582lrtHTTPS 10 } sispm1040582lrtAuthMethod OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 9 } -- -- ======================================================================================================================= -- Start sispm1040582lrtAuthMethodConfig group -- ======================================================================================================================= --sispm1040582lrtAuthMethodConfigTable sispm1040582lrtAuthMethodConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTAuthMethodConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Auth Method Config Table." ::= { sispm1040582lrtAuthMethod 1 } sispm1040582lrtAuthMethodConfigEntry OBJECT-TYPE SYNTAX SISPM1040582LRTAuthMethodConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Auth Method Config Entry." INDEX { sispm1040582lrtAuthMethodConfigClient } ::= { sispm1040582lrtAuthMethodConfigTable 1 } SISPM1040582LRTAuthMethodConfigEntry ::= SEQUENCE { sispm1040582lrtAuthMethodConfigClient INTEGER, sispm1040582lrtAuthMethodConfigMethod1 INTEGER, sispm1040582lrtAuthMethodConfigMethod2 INTEGER, sispm1040582lrtAuthMethodConfigMethod3 INTEGER, sispm1040582lrtAuthMethodConfigMethod4 INTEGER, sispm1040582lrtAuthMethodConfigServicePort Integer32, sispm1040582lrtAuthMethodConfigFallback Integer32 } sispm1040582lrtAuthMethodConfigClient OBJECT-TYPE SYNTAX INTEGER { console ( 1 ), telnet ( 2 ), ssh ( 3 ), http ( 4 ), https ( 5 ) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "1: console. 2: telnet. 3: ssh. 4: http. 5: https. " ::= { sispm1040582lrtAuthMethodConfigEntry 1 } sispm1040582lrtAuthMethodConfigMethod1 OBJECT-TYPE SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication." ::= { sispm1040582lrtAuthMethodConfigEntry 2 } sispm1040582lrtAuthMethodConfigMethod2 OBJECT-TYPE SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication." ::= { sispm1040582lrtAuthMethodConfigEntry 3 } sispm1040582lrtAuthMethodConfigMethod3 OBJECT-TYPE SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication." ::= { sispm1040582lrtAuthMethodConfigEntry 4 } sispm1040582lrtAuthMethodConfigMethod4 OBJECT-TYPE SYNTAX INTEGER {no(0) ,redirect(1) ,local(2) ,radius(3) ,tacacs(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Methods that involves remote servers are timed out if the remote servers are offline.Each method is tried from left to right and continues until a method either approves or rejects a user. 0: no, Authentication is disabled and login is not possible. 1: redirect, When HTTPS is enabled, enable HTTPS automatic redirect on the switch. 2: local, Use the local user database on the switch for authentication. 3: radius, Use remote RADIUS server(s) for authentication. 4: tacacs+, Use remote TACACS+ server(s) for authentication." ::= { sispm1040582lrtAuthMethodConfigEntry 5 } sispm1040582lrtAuthMethodConfigServicePort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The network port number this client bound to provide service." ::= { sispm1040582lrtAuthMethodConfigEntry 6 } sispm1040582lrtAuthMethodConfigFallback OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable fallback to local authentication 0:Disable 1:Enable" ::= { sispm1040582lrtAuthMethodConfigEntry 7 } sispm1040582lrtCommandAuthorizationMethodTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTCommandAuthorizationMethodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Command Authorized Method Config Table." ::= { sispm1040582lrtAuthMethod 2 } sispm1040582lrtCommandAuthorizationMethodEntry OBJECT-TYPE SYNTAX SISPM1040582LRTCommandAuthorizationMethodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Command Authorized Method Config Entry." INDEX { sispm1040582lrtCommandAuthorizationMethodClient } ::= { sispm1040582lrtCommandAuthorizationMethodTable 1 } SISPM1040582LRTCommandAuthorizationMethodEntry ::= SEQUENCE { sispm1040582lrtCommandAuthorizationMethodClient INTEGER, sispm1040582lrtCommandAuthorizationMethodMethod Integer32, sispm1040582lrtCommandAuthorizationMethodCmdLvl Integer32, sispm1040582lrtCommandAuthorizationMethodCfgCmd Integer32, sispm1040582lrtCommandAuthorizationMethodFallback Integer32 } sispm1040582lrtCommandAuthorizationMethodClient OBJECT-TYPE SYNTAX INTEGER { console ( 1 ), telnet ( 2 ), ssh ( 3 ), http ( 4 ), https ( 5 ) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "1: console. 2: telnet. 3: ssh. 4: http. 5: https. " ::= { sispm1040582lrtCommandAuthorizationMethodEntry 1 } sispm1040582lrtCommandAuthorizationMethodMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Method can be set to one of the following values: 0:no: Command authorization is disabled. User is granted access to CLI commands according to his privilege level. 3:tacacs: Use remote TACACS+ server(s) for command authorization. If all remote servers are offline, the user is granted access to CLI commands according to his privilege level." ::= { sispm1040582lrtCommandAuthorizationMethodEntry 2 } sispm1040582lrtCommandAuthorizationMethodCmdLvl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Authorize all commands with a privilege level higher than or equal to this level. Valid values are in the range 0 to 15." ::= { sispm1040582lrtCommandAuthorizationMethodEntry 3 } sispm1040582lrtCommandAuthorizationMethodCfgCmd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Also authorize configuration commands. 0:Disable 1:Enable" ::= { sispm1040582lrtCommandAuthorizationMethodEntry 4 } sispm1040582lrtCommandAuthorizationMethodFallback OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This function is an auxiliary function of Authorization. 0:Disable 1:Enable" ::= { sispm1040582lrtCommandAuthorizationMethodEntry 5 } sispm1040582lrtAccountingMethodTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTAccountingMethodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Accounting Method Config Table." ::= { sispm1040582lrtAuthMethod 3 } sispm1040582lrtAccountingMethodEntry OBJECT-TYPE SYNTAX SISPM1040582LRTAccountingMethodEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Accounting Method Config Entry." INDEX { sispm1040582lrtAccountingMethodClient } ::= { sispm1040582lrtAccountingMethodTable 1 } SISPM1040582LRTAccountingMethodEntry ::= SEQUENCE { sispm1040582lrtAccountingMethodClient INTEGER, sispm1040582lrtAccountingMethodMethod Integer32, sispm1040582lrtAccountingMethodCmdLvl Integer32, sispm1040582lrtAccountingMethodCfgCmd Integer32 } sispm1040582lrtAccountingMethodClient OBJECT-TYPE SYNTAX INTEGER { console ( 1 ), telnet ( 2 ), ssh ( 3 ), http ( 4 ), https ( 5 ) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "1: console. 2: telnet. 3: ssh. 4: http. 5: https. " ::= { sispm1040582lrtAccountingMethodEntry 1 } sispm1040582lrtAccountingMethodMethod OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Method can be set to one of the following values: 0:no: Accounting is disabled. 3:tacacs: Use remote TACACS+ server(s) for accounting." ::= { sispm1040582lrtAccountingMethodEntry 2 } sispm1040582lrtAccountingMethodCmdLvl OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable accounting of all commands with a privilege level higher than or equal to this level. Valid values are in the range 0 to 15. Leave the field empty to disable command accounting." ::= { sispm1040582lrtAccountingMethodEntry 3 } sispm1040582lrtAccountingMethodCfgCmd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enable exec (login) accounting. 0:Disable 1:Enable" ::= { sispm1040582lrtAccountingMethodEntry 4 } --sispm1040582lrtTELNET OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 10 } -- --sispm1040582lrtTELNETPort OBJECT-TYPE -- SYNTAX Integer32(1..65534) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "TELNET service port number. -- range : 1-65534, default : 23." -- ::= { sispm1040582lrtTELNET 1 } -- --sispm1040582lrtHTTP OBJECT IDENTIFIER ::= { sispm1040582lrtSecurity 11 } -- --sispm1040582lrtHTTPPort OBJECT-TYPE -- SYNTAX Integer32(1..65534) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "HTTP service port number. -- range : 1-65534, default : 80." -- ::= { sispm1040582lrtHTTP 1 } -- ======================================================================================================================= sispm1040582lrtMaintenance OBJECT IDENTIFIER ::= { sispm1040582lrtProductId 4 } sispm1040582lrtSoftware OBJECT IDENTIFIER ::= { sispm1040582lrtMaintenance 3 } sispm1040582lrtConfig OBJECT IDENTIFIER ::= { sispm1040582lrtMaintenance 4 } -- -- ======================================================================================================================= -- Objects in the sispm1040582lrtMaintenance Group -- ======================================================================================================================= sispm1040582lrtRestartDevice OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Command to restart the device." DEFVAL { noAction } ::= { sispm1040582lrtMaintenance 1 } sispm1040582lrtFactoryDefaults OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the configuration to Factory Defaults keep-ip." DEFVAL { noAction } ::= { sispm1040582lrtMaintenance 2 } --sispm1040582lrtSoftware sispm1040582lrtSoftwareUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the username for 'tftp' firmware upgrading." ::= { sispm1040582lrtSoftware 1 } sispm1040582lrtSoftwarePassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the password for 'tftp' firmware upgrading." ::= { sispm1040582lrtSoftware 2 } sispm1040582lrtSoftwareIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the firmware tftp server." ::= { sispm1040582lrtSoftware 3 } sispm1040582lrtSoftwareFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the path and filename for firmware upgrading." ::= { sispm1040582lrtSoftware 4 } sispm1040582lrtSoftwareUpgradeCmd OBJECT-TYPE SYNTAX INTEGER { noAction ( 0 ), tftpUpgrade ( 1 ), ftpUpgrade ( 2 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "Firmware upgrade command. noAction(0) - do nothing (read only). tftpUpgrade(1) - activate 'tftp' firmware upgrade ftpUpgrade(2) - activate 'ftp' firmware upgrade" DEFVAL { noAction } ::= { sispm1040582lrtSoftware 5 } sispm1040582lrtSoftwareImageSelectionCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Activate firmware image selection. noAction(0) - do nothing - returned upon get. activate(1) - activate firmware image selection." DEFVAL { noAction } ::= { sispm1040582lrtSoftware 6 } sispm1040582lrtSaveStartCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "This copies running-config to startup-config, thereby ensuring that the currently active configuration will be used at the next reboot. " DEFVAL { noAction } ::= { sispm1040582lrtConfig 1 } sispm1040582lrtConfigUsername OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the username for 'tftp' 'upload config' or 'download config'." ::= { sispm1040582lrtConfig 2 } sispm1040582lrtConfigPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the password for 'tftp' 'upload config' or 'download config'." ::= { sispm1040582lrtConfig 3 } sispm1040582lrtConfigIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the IP address for 'tftp' 'upload config' or 'download config'." ::= { sispm1040582lrtConfig 4 } sispm1040582lrtConfigFilename OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Get/Set the filename in switch for 'tftp' 'upload config' or 'download config'." ::= { sispm1040582lrtConfig 5 } sispm1040582lrtConfigFileTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTConfigFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The config file tabe." ::= { sispm1040582lrtConfig 6 } sispm1040582lrtConfigFileEntry OBJECT-TYPE SYNTAX SISPM1040582LRTConfigFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "an entry in the config file tabe." INDEX { sispm1040582lrtConfigFileIndex } ::= { sispm1040582lrtConfigFileTable 1 } SISPM1040582LRTConfigFileEntry ::= SEQUENCE { sispm1040582lrtConfigFileIndex Integer32, sispm1040582lrtShowConfigFileName DisplayString, sispm1040582lrtActivateConfigCmd ActivateCmd, sispm1040582lrtDeleteConfigCmd ActivateCmd, sispm1040582lrtUploadConfigCmd INTEGER, sispm1040582lrtDownloadConfigCmd INTEGER } sispm1040582lrtConfigFileIndex OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The config file index." ::= { sispm1040582lrtConfigFileEntry 1 } sispm1040582lrtShowConfigFileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Shows the config file name. Without config filename:'NewConfig' is temp file when 'activate upload config' can 'create new file' and 'change create filename'." ::= { sispm1040582lrtConfigFileEntry 2 } sispm1040582lrtActivateConfigCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Activate config command. noAction(0) : do nothing (read only). activate(1) : activate the config" DEFVAL { noAction } ::= { sispm1040582lrtConfigFileEntry 3 } sispm1040582lrtDeleteConfigCmd OBJECT-TYPE SYNTAX ActivateCmd MAX-ACCESS read-write STATUS current DESCRIPTION "Delete config command. noAction(0) : do nothing (read only). activate(1) : delete the config" DEFVAL { noAction } ::= { sispm1040582lrtConfigFileEntry 4 } sispm1040582lrtDownloadConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction ( 0 ), tftpDownload ( 1 ) --ftpDownload ( 2 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "Download config command. noAction (0) - do nothing (read only). tftpDownload (1) - activate 'tftp' config download." DEFVAL { noAction } ::= { sispm1040582lrtConfigFileEntry 5 } sispm1040582lrtUploadConfigCmd OBJECT-TYPE SYNTAX INTEGER { noAction ( 0 ), tftpUpload ( 1 ) --ftpUpload ( 2 ) } MAX-ACCESS read-write STATUS current DESCRIPTION "Upload config command. noAction (0) - do nothing (read only). tftpUpload (1) - activate 'tftp' config upload. For merge/replace running-config: 1:merge 3:replace" DEFVAL { noAction } ::= { sispm1040582lrtConfigFileEntry 6 } -- ======================================================================================================================= sispm1040582lrtDiagnostics OBJECT IDENTIFIER ::= { sispm1040582lrtMaintenance 5 } sispm1040582lrtPingIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IP Address. " ::= { sispm1040582lrtDiagnostics 1 } sispm1040582lrtPingSize OBJECT-TYPE SYNTAX Integer32(60..1400) MAX-ACCESS read-write STATUS current DESCRIPTION " Size of ICMP echo packet. range : 60-1400, default : 64. " ::= { sispm1040582lrtDiagnostics 2 } sispm1040582lrtDoPingConfig OBJECT-TYPE SYNTAX Integer32(1) MAX-ACCESS read-write STATUS current DESCRIPTION "Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. " ::= { sispm1040582lrtDiagnostics 3 } sispm1040582lrtPingResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show ping result. " ::= { sispm1040582lrtDiagnostics 4 } sispm1040582lrtPing6IpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IPv6 Address. " ::= { sispm1040582lrtDiagnostics 5 } sispm1040582lrtPing6Size OBJECT-TYPE SYNTAX Integer32(60..1400) MAX-ACCESS read-write STATUS current DESCRIPTION " Size of ICMP echo packet. range : 60-1400. " ::= { sispm1040582lrtDiagnostics 6 } sispm1040582lrtPing6EgressInterface OBJECT-TYPE SYNTAX Integer32(1..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID (VID) of the specific egress IPv6 interface which ICMP packet goes." ::= { sispm1040582lrtDiagnostics 7 } sispm1040582lrtDoPing6Config OBJECT-TYPE SYNTAX Integer32(1) MAX-ACCESS read-write STATUS current DESCRIPTION "Do ping-config. Get this OID always return zero. 1 - ping. Uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. " ::= { sispm1040582lrtDiagnostics 8 } sispm1040582lrtPing6Result OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show ping result. " ::= { sispm1040582lrtDiagnostics 9 } sispm1040582lrttracerouteIpAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The destination IP Address. " ::= { sispm1040582lrtDiagnostics 10 } sispm1040582lrttracerouteProtocol OBJECT-TYPE SYNTAX Integer32(0..2) MAX-ACCESS read-write STATUS current DESCRIPTION " Specify protocol including icmp=0, udp=1 and tcp=2. range : 0-2, default : 0. " ::= { sispm1040582lrtDiagnostics 11 } sispm1040582lrttracerouteWaittime OBJECT-TYPE SYNTAX Integer32(1..60) MAX-ACCESS read-write STATUS current DESCRIPTION " Specify wait time for waiting probe packets come back. range : 1-60(sec), default : 5(sec). " ::= { sispm1040582lrtDiagnostics 12 } sispm1040582lrttracerouteMaxTTL OBJECT-TYPE SYNTAX Integer32(1..255) MAX-ACCESS read-write STATUS current DESCRIPTION " Specify max TTL. range : 1-255, default : 30. " ::= { sispm1040582lrtDiagnostics 13 } sispm1040582lrttracerouteNqueries OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-write STATUS current DESCRIPTION " Specify number of probe packets. range : 1-10, default : 3. " ::= { sispm1040582lrtDiagnostics 14 } sispm1040582lrtDotracerouteConfig OBJECT-TYPE SYNTAX Integer32(1) MAX-ACCESS read-write STATUS current DESCRIPTION "Do traceroute-config. Get this OID always return zero. 1 - ping. Uses the traceroute program to get ip address of the middle gateway. " ::= { sispm1040582lrtDiagnostics 15 } sispm1040582lrttracerouteResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " Show traceroute result. " ::= { sispm1040582lrtDiagnostics 16 } sispm1040582lrtCableDiagnostics OBJECT IDENTIFIER ::= { sispm1040582lrtDiagnostics 17 } sispm1040582lrtCableDiagnosticsTest OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Run Cable Diagnostics. port, range : 1 - port number." ::= { sispm1040582lrtCableDiagnostics 1 } sispm1040582lrtCableDiagnosticsTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTCableDiagnosticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " ::= { sispm1040582lrtCableDiagnostics 2 } sispm1040582lrtCableDiagnosticsEntry OBJECT-TYPE SYNTAX SISPM1040582LRTCableDiagnosticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtCableDiagnosticsPort } ::= { sispm1040582lrtCableDiagnosticsTable 1 } SISPM1040582LRTCableDiagnosticsEntry ::= SEQUENCE { sispm1040582lrtCableDiagnosticsPort Integer32, sispm1040582lrtCableDiagnosticsLinkStatus DisplayString, sispm1040582lrtCableDiagnosticsTestResult DisplayString, sispm1040582lrtCableDiagnosticsLength DisplayString } sispm1040582lrtCableDiagnosticsPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "port index" ::= { sispm1040582lrtCableDiagnosticsEntry 1 } sispm1040582lrtCableDiagnosticsLinkStatus OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the cable." ::= { sispm1040582lrtCableDiagnosticsEntry 2 } sispm1040582lrtCableDiagnosticsTestResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Test Result of the cable." ::= { sispm1040582lrtCableDiagnosticsEntry 3 } sispm1040582lrtCableDiagnosticsLength OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The length (in meters) of the cable." ::= { sispm1040582lrtCableDiagnosticsEntry 4 } sispm1040582lrtSwitchRebootSchedule OBJECT IDENTIFIER ::= { sispm1040582lrtMaintenance 6 } sispm1040582lrtSwitchRebootMode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Switch Reboot Mode. 0:disable 1:enable" ::= { sispm1040582lrtSwitchRebootSchedule 1 } sispm1040582lrtSwitchRebootTimeTable OBJECT-TYPE SYNTAX SEQUENCE OF SISPM1040582LRTSwitchRebootTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Configure the Switch reboot time. " ::= { sispm1040582lrtSwitchRebootSchedule 2 } sispm1040582lrtSwitchRebootTimeEntry OBJECT-TYPE SYNTAX SISPM1040582LRTSwitchRebootTimeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " " INDEX { sispm1040582lrtSwitchRebootWeekIndex } ::= { sispm1040582lrtSwitchRebootTimeTable 1 } SISPM1040582LRTSwitchRebootTimeEntry ::= SEQUENCE { sispm1040582lrtSwitchRebootWeekIndex Integer32, sispm1040582lrtSwitchRebootTimeHour Integer32, sispm1040582lrtSwitchRebootTimeMinute Integer32 } sispm1040582lrtSwitchRebootWeekIndex OBJECT-TYPE SYNTAX Integer32 (1..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Switch reboot week index. 1: Sun, 2: Mon, 3:Tue, 4: Wed, 5: Thu, 6: Fri, 7: Sat" ::= { sispm1040582lrtSwitchRebootTimeEntry 1 } sispm1040582lrtSwitchRebootTimeHour OBJECT-TYPE SYNTAX Integer32 (-1..23) MAX-ACCESS read-write STATUS current DESCRIPTION "Switch Reboot Time (Hour). Range: 0-23. -1:disable" ::= { sispm1040582lrtSwitchRebootTimeEntry 2 } sispm1040582lrtSwitchRebootTimeMinute OBJECT-TYPE SYNTAX Integer32 (-1..55) MAX-ACCESS read-write STATUS current DESCRIPTION "Switch Reboot Time (Minute). Range:0,5,10,...,55. -1:disable" ::= { sispm1040582lrtSwitchRebootTimeEntry 3 } -- ======================================================================================================================= sispm1040582lrtTrap OBJECT IDENTIFIER ::= { sispm1040582lrtProductId 5 } sispm1040582lrtTrapEvent OBJECT IDENTIFIER ::= { sispm1040582lrtTrap 1 } sispm1040582lrtTrapEventNotifications OBJECT IDENTIFIER ::= { sispm1040582lrtTrapEvent 0 } sispm1040582lrtEmergency NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Emergency. Emergency conditions." ::= { sispm1040582lrtTrapEventNotifications 1 } sispm1040582lrtAlert NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Alert. Alert conditions." ::= { sispm1040582lrtTrapEventNotifications 2 } sispm1040582lrtCritical NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Critical. Critical conditions." ::= { sispm1040582lrtTrapEventNotifications 3 } sispm1040582lrtError NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Error. Error conditions." ::= { sispm1040582lrtTrapEventNotifications 4 } sispm1040582lrtWarning NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Warning. Warning conditions." ::= { sispm1040582lrtTrapEventNotifications 5 } sispm1040582lrtNotice NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Notice. Notice conditions." ::= { sispm1040582lrtTrapEventNotifications 6 } sispm1040582lrtInformational NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Informational. Informational conditions." ::= { sispm1040582lrtTrapEventNotifications 7 } sispm1040582lrtDebug NOTIFICATION-TYPE OBJECTS { sispm1040582lrtInformation } STATUS current DESCRIPTION "The severity level is Debug. Debug conditions." ::= { sispm1040582lrtTrapEventNotifications 8 } sispm1040582lrtTrapVariable OBJECT IDENTIFIER ::= { sispm1040582lrtTrap 2 } sispm1040582lrtInformation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Trap information." ::= { sispm1040582lrtTrapVariable 1 } sispm1040582lrtZTPTrap OBJECT IDENTIFIER ::= { sispm1040582lrtTrap 3 } sispm1040582lrtZTPTrapEvent OBJECT IDENTIFIER ::= { sispm1040582lrtZTPTrap 0 } sispm1040582lrtZTPOnboardTrap NOTIFICATION-TYPE OBJECTS { sysObjectID, sispm1040582lrtSnmpSystemVersion, sispm1040582lrtSnmpSystemReadCommunity, sispm1040582lrtSnmpSystemWriteCommunity, sispm1040582lrtSystemInfoSerialNumber, sispm1040582lrtSystemInfoHostMACAddress, sispm1040582lrtIPInterfacesIPv4Address } STATUS current DESCRIPTION "The switch information." ::= { sispm1040582lrtZTPTrapEvent 1 } END