Note: If you have already entered an IP address on the Quick Setup script on the command line interface or the Quick Setup web page, or changed the IP address displayed on the LCD, you will not be able to use Detector to assign an IP address.
From the Timeout drop-down menu (in the toolbar), select the number of milliseconds before the search stops. The default is 500.
Click the Search
icon . A list of Lantronix Ethernet devices on the network
displays.
If the SLM has an automatically assigned IP
address and you want to change it, select the SLM and click the Network Settings icon . The
Enter Network Settings window displays. The Device
Type and MAC Address (Ethernet
Address) fields identify the unit.
Enter the following information:
IP Address |
An IP address that will be unique and valid on your network and in the same subnet as your PC. There is no default. Note: Enter all IP addresses in dot quad notation. |
|
Subnet Mask |
The subnet mask specifies the network segment on which the SLC resides. To accept the default, leave blank. |
|
Default Gateway |
IP address of the router for this network. To accept the default, leave blank. |
|
Click OK. A message confirms that your network configuration has been sent.
Click OK.
To confirm the change, click the Search
icon and
verify that the unit has new network settings.