From the device list, select the device.
On the toolbar, click Assign IP 
. The Assign IP Address window displays.
You can set the IP address of a device on the list or identify a device that is not on the list and set its IP address.
To set the IP Address of a Device:
From the device list, select the device.
On the toolbar, click Assign IP . The Assign IP Address window displays.
Note: The Device Identification window prompts for the device's hardware address if a device was not selected in the previous step. Enter the hardware address from the product label and click Next.
On the Assignment Method page, select Assign a specific IP address and click Next. The IP Settings page displays.
On the IP settings page, enter the following information:
|
IP address |
An IP address that will be unique and valid on your network. There is no default. Note: Enter the IP address in dot-quad notation. Do not use leading zeros in the fields for dot-quad numbers less than 100. For example, if your IP address is 172.19.201.28, do not enter 028 for the last segment. |
|
Subnet mask |
The network segment on which the device resides. There is no default. The subnet mask displays automatically based on the IP address you entered, but you can change it. |
|
Default gateway |
IP address of the router for this network. |
Click Next. The Assignment page displays.
Click Assign to assign the IP address to the device. A status message indicates when the assignment is complete.
To exit, click Finish.
See also